Wheel Liners

Select Vehicle Year

  
Wheel Liners

Available Years for Wheel Liners



What our customers are saying:

The merchandise is great quality and I will buy again.

Kristin

Hartsville, SC


Search For Custom Fit Accessories
Select A Category Below




Wheel Accessories Videos

Wheel Masters Tire Inflation and Repair WM8004 Review

Speaker 1: Today we're gonna take a look at the Wheel Masters Stainless Steel Hub Mount Four Hose Inflation Kit for 22.5 inch to 24 inch dually wheels.These are stainless wrapped hoses. It'll take the hassle out of inflating and checking the air pressure of dual tires. This whole kit is designed for steel or aluminum rear wheels with wheel liners. Basically, it'll relocate the inner tire valve stem to the outer wheel, and extends the valve stem on the outer tire so there's crawling on the ground or reaching for your valve stem on the inner tire.These are stainless steel wrapped two ply rubber tubing with nylon braiding. The durable wrapping will help prevent the hoses from cracking or leaking. It is a simple hub mount installation with all this included hardware.


Wheel Masters Tire Inflation and Repair WM8009 Review

Today we're going to take a look at the Wheel Masters Stainless Steel Hand Hole Mount Dual Tire Inflation Kit for 16" to 19-1/2" inner dual wheels. These are stainless steel wrapped hoses that'll take the hassle out of inflating and checking the air pressure of your inner tires on the dual wheels. Basically, when you put this on your inner tire valve stem, it'll relocate the inner tire valve stem to the outer wheel so there's no crawling on the ground or reaching for the valve stem on your inner tire. This kit installs on the inner tire valve stem and on the hand holes of the outer wheels or the wheel liners. These are stainless steel wrap two-ply rubber tubing with nylon braiding. The durable wrapping on them helps prevent the hoses from any cracking or leaking. Again, it's a simple hand hole mount installation with these brackets right here.


Wheel Masters Wheel Accessories WM9005-6 Review

Today we're gonna be taking a look at the Wheel Master's lug nut covers. These are designed for your vehicle that has 22 and a half inch hub pilot wheels, with 33 millimeter lug nuts. The stainless steel covers fit over the lug nuts to add a clean, finished look to your wheels. It's a really simple installation. They simple just slide over the lug nuts. Stainless steel construction.


Wheel Masters 2-Hose Inflation Kit Review

Today we're going to be taking a look at the Wheel Masters two-hose inflation kit for the inner dually on dual rear wheels. This is a hub or center cap-style mount. Part number is WM8005. This kit's going to easily allow you to check your air pressure without having to crawl around on the ground and find that valve stem on that inner wheel. It offers a durable, heavy-duty stainless steel wrapping around a two-ply rubber tube which will give you years of good service by preventing any cracks or leaks. The first thing we'll need to do do install our new Wheel Master extension is to remove the valve cap from our inner dual wheel. Now we can take our Wheel Master extension.


Wheel Masters 2-Hose Inflation Kit Insatallation - 2017 Jayco Eagle HT

Today on our 2017 JAYCO Eagle HT, we're going to take a look at and also show you how to install the Wheel Masters two hose inflation kit. This kit's going to easily allow you to check your air pressure without having to crawl around on the ground and find that valve stem on that inner wheel. It offers a durable, heavy duty, stainless steel wrapping around the two inaudible 00:00:21 rubber tube, which will give you years of good service by preventing any crack or leaks. For the first thing we'll need to do to install our new wheel master extension is to remove the valve cap from our inner dual wheel. Now we can take our Wheel Master extension, we're going to pass that through the outside rim. We'll align it with our valve stem. Then if we just turn here on the front, we can thread that right on.


Namsco Wheel Accessories NA719581 Review

Today we're going to take a look at the Namsco Stainless Steel replacement Front Wheel Cover. This is a custom fit part, it is designed to fit Ford vehicles with the 19-1/2" inaudible 00:00:09 on front wheels and on any custom fit part wheel I just always like to recommend to go to our website use our fit guide, put in your year model vehicle and it'll show you if this would work for your application. Now this replacement wheel cover will fit over a wheel on the front of your vehicle. It is a nice low profile design, which will go over a nice sleek look. It does stay looking great for years due to the 304 stainless steel construction which is very sturdy and rustproof. You notice the outside has a nice mirror finish to give you a nice eye catching shine. Now the mounting hardware is included for installation, also includes this anti-rotation bracket retention system will hold this hubcap on the center of the wheel so that it won't rotate or wobble. A few specs on this again, the application is for Ford Vehicles with 19-1/2" wheel diameters, 8 lug designed front wheel.


Wheel Masters 4 Hose Inflation Kit Installation

Today we're going to be taking a look at, as well as doing a quick installation of, the Wheel Masters Four-Hose inflation Kit for 16-inch to 19 1/2-inch dually wheels, part number WM8208. We're here at our rear dualy wheel. In this particular case, we're on a motor home, but these Wheel Masters Dual Tire inflators will fit any set of dual wheels, whether it be a pick up truck or a motor home like we're on here today. We have a couple of different hoses. They are stainless steel-wrapped hose. This hose here, the straight one, is designed for the inner dual wheel, which can be a real pain to try to fill up with air, especially if you notice the tire is down as it's way up in there. For the outer wheel we have our valve stem and it's actually going backwards, so we have a 90-degree. Again, this is stainless steel-wrapped rubber hose.


Wheel Masters Spare Tire Inflation Kit Review

Today we will be doing a review of the Wheel Master spare tire inflation kit under chassis mount with stainless steel hose, part number WM82286-S. The spare tire inflation kit comes with a 36" stainless steel wrapped hose that allows you to move your spare tire's valve stem to your bumper. This spare tire inflation kit eliminates the hassle of crawling under your vehicle and checking the tire pressure in your spare tire. By moving the valve stem to the rear bumper it allows easy access to make sure that your spare tire has proper inflation. The kit comes with a ninety degree valve extender which attaches to your original valve stem on your spare tire. From the ninety degree extender you'll attach the braided hose and run it out to the rear of your bumper. The mounting attachment is also included with the kit with a couple different options for mounting. There's a screw that can be used or there is a bolt, a lock washer and a nut. Depending on your vehicle will depend on what style mounting you will choose.


Wheel Masters Spare Tire Inflation Kit Review

Today we'll be reviewing the Wheel Masters Spare Tire Inflation Kit for the Trunk Mount with the Rubber Hose part number WM82286-R. The Wheel Masters Spare Tire Inflation Kit comes with a 36" rubber hose that let's you conveniently inflate and check the pressure on your spare tire without removing everything from the trunk of your vehicle. To accomplish this it allows you to connect the 36" hose to the original valve stem on your spare tire and 00:00:28 a remote location it allows you easy access for checking the pressure in your spare tire. The kit comes with an elbow that will be screwed onto the original valve stem on your spare tire. This will allow for the spare tire cover to be set back in place and not damage the hose or the valve stem. Next the end of the rubber hose threads onto the end of elbow and you will route the rubber hose to a convenient location in the trunk of your vehicle. On this particular application we found an area just behind the rear tail light that seems to work pretty well that's out of the way. A small L bracket also comes to mount the other end of the air hose. To do this you can either use a sheet metal screw or the bolt with the lock washer and nut.


Articles about Wheel Accessories



Wheel Accessories Questions and Answers

  • Availability of Wheel Liners for 2002 Ford E450 Super Duty Van RV
  • All of the wheel liners we carry that fit the 2002 Ford E450 Van can be seen on the link provided. The correct set for your van will depend on the size of your wheels and how many hand holes your wheels have. You can use the "Select Vehicle Style" drop-down menu at the top of the page to choose your van style and see the suitable liners. For example, if your van has 16- or 16-1/2-inch 8-lug dually wheels with 4 hand holes you can use kit # WM160U0. This is a set of four.
    view full answer...

  • Dually Simulators Compatible With 2009 Motorhome On Chevy Chassis
  • Yes, for your 2009 motorhome on Chevy chassis, the Wheel Masters Wheel Liners - 16" and 16-1/2", 8-Lug Dually - 4 HH - Front/Rear # WM160U0J are designed for 2000 and newer GM chassis with 16" or 16-1/2", 8-lug dually wheels with 4 hand holes like you have pictured. They will adapt to your wheels with the lugs you have pictured. I've attached a video review that will help as well as instructions. These wheel simulators attach with 4 jam nuts torqued to spec for a very easy install.
    view full answer...

  • Fit of Namsco Wheel Cover # NA7165B1 on 16 Inch Wheel
  • The spring clips that run along the inside of the wheel cover are flexible enough to allow the cover to be used with a 16 or a 16-1/2 inch wheel. I have confirmed with Namsco that this cover is compatible with a 16 inch wheel.
    view full answer...

  • Height of the Wheel Masters Lug Nut Covers # WM8011
  • I ran out to our warehouse to measure the height of the Wheel Masters Lug Nut Covers # WM8011 that you referenced and found them to be 1-9/16 inches tall.
    view full answer...

  • Overall Height of the Wheel Masters Lug Nut Covers WM8019
  • I went and pulled the # WM8019 and found that overall they are 1-3/4 inches tall.
    view full answer...

  • Stainless Steel 19-1/2
  • We have covers that are going to work for your 1995 Fleetwood Southwind. The Wheel Masters Wheel Covers # WM3195B0 fit 19-1/2", 6-lug wheels and are made of stainless steel, though they have 10 hand holes instead of two (we do not carry any covers that fit 19-1/2", 6-lug wheels and have two hand holes). The covers also come with a dual-tire inflation kit and mounting hardware. I've added a link to a video review of this product for you to take a look at.
    view full answer...

  • Differences Between the Wheel Masters # WM168E0JC and the Namsco # NA7168E0JC Wheel Liners
  • On the surface the Wheel Masters Wheel Liners # WM168E0JC and the Namsco Wheel Liners # NA7168E0JC look the same and have a lot of similarities like the 304 stainless steel construction and contoured design for a sturdy, rustproof, enhanced look. The things that set the Wheel Masters liners apart is that they come with a dual-tire inflation kit that makes it easy to check tire pressure and inflate dually tires, plus they come with a 5-year warranty. The Namsco option only comes with...
    view full answer...

  • Stainless Steel Wheel Liners For 2012 Ford E-350 Van
  • I went through our fit guide for your 2012 Ford E-350 Van for wheel liners. If you have the 8-lug 16 inch wheels, the wheel liners I found are the Wheel Masters Wheel Liners, part # WM168E0JC. These are made of 304 Stainless Steel and come with the mounting hardware and a dual inflation kit that makes it easy to check tire pressure and inflate dually tires. I have attached a link to a product review for these liners you can check out. The wheel liners you referenced, part # WM160F0JM,...
    view full answer...

  • Wheel Liners with 8 Lugs and 4 Hand Holes to Fit 22-1/2 Inch Wheels
  • We have three wheel liners that sound like what you may have on your Monaco. You'll need to make sure they fit the rims you have before purchasing. # NA226H40N for 22-1/2 by 6-3/4 inch rims # NA227H40 for 22-1/2 by 7-1/2 inch rims. Direct fit on Accuride wheels 29028. # NA228H40N for 22-1/2 by 8-1/4 inch rims. Direct fit on Accuride wheels 28484. All three models are 8 lug, hub-piloted liners with 4 hand holes. To measure your the width of your wheels you need to measure from...
    view full answer...

  • Height of the Wheel Masters Lug Nut Covers
  • I went out to the warehouse to measure the Wheel Masters Lug Nut Covers # WM8012. They measure 1-3/4 inches tall. These are the only 1-1/2 inch lug nut covers that we offer.
    view full answer...

  • Replacement Mounting Hardware Recommendation For Namsco Wheel Covers
  • We sure do carry the mounting hardware for the Namsco Wheel Covers, part # NA7195B0. The replacement mounting hardware is part # NA7140. This is a hardware kit for 1 wheel, so if more are needed, you would order that quantity accordingly.
    view full answer...

  • Would Wheel Masters Lug Nut Covers # WM8010 Fit 2008 Chevy Silverado
  • If your 2008 Chevy Silverado has 1 inch lug nuts on it the part # WM8010 would work well. This isn't only designed for the larger Kodiak style trucks.
    view full answer...

  • What is the Depth of the Wheel Masters Wheel Liners # WM160UO
  • I am not quite sure what dimension you are talking about for the Wheel Masters Wheel Liners # WM160UO when you says 2-1/4 inches, but I did speak with my contact at Wheel Masters about some dimensions of the liners. She said that the front liners have a diameter of 17 inches and are 5 inches tall while the rear liners have a diameter of 17-5/8 inches and are 7 inches tall.
    view full answer...

  • How Do I Determine if I Have Budd Wheels
  • The Wheel Masters Wheel Liners, # WM160F0JM, are designed to fit 2003 and newer Ford Super Duty chassis excluding those with Budd wheels. A stud-piloted wheel is commonly referred to as a "Budd" since the Budd corporation was the first to come out with these wheels. To determine if you have a stud-piloted/Budd wheel or one that is hub-piloted, you will need to remove the current cover on your wheels and remove one lug nut. Stud piloted wheels use nuts with ball seat and the wheel would...
    view full answer...

  • Will Wheel Masters Wheel Liners for 16 Inch, 8 Lug Dually Wheels Fit 2013 Ford E450 Super Duty RV
  • If the wheels on your 2013 Ford E-450 chassis Four Winds RV are 16 inch and dually wheels then yes, the wheel liners, # WM160F0JM, will fit. They are designed to fit 2003 and newer Ford Super Duty chassis but will not fit Budd wheels. I have linked a video review for you.
    view full answer...

  • Recommended Wheel Liner with 4 Hand Holes for 8 Lug Wheel
  • As long as you choose a wheel liner that will fit the rim size on your trailer, you can go from a liner with 8 hand holes to one with 4. You will just need to make sure you are able to line a hand hole on the liner with the hand hole on the wheel that has the air valve. The Namsco Wheel Liners # NA226H40N wheel liners that you were looking at are compatible with 22-1/12 inch x 6-3/4 inch wheels that have 8 lugs. I have attached a link that will take you to our available selection...
    view full answer...

  • Can the Wheel Masters Support Brackets part # WM8029VS fit on 15 Inch Wheels
  • I spoke to my contact at Wheel Masters and she informed me that you should be able to use the Wheel Masters Support Brackets part # WM8029VS on your 15 inch wheels. She said that you might have to pinch the brackets to your wheels with a pair of pliers to get them to fully grab onto the rim but they should work. Check out the picture I attached.
    view full answer...

  • Recommended Wheel Liners For Dually Wheels On 2009 Chevy Cutaway Chassis Motorhome
  • We have two wheel liner options I recommend for your 2009 Chevy Cutaway Chassis for your Class C Motorhome. We have the Wheel Masters Wheel Liners # WM160U0J and the Namsco Wheel Liners # NA7160U0J. These are both nice and clean options designed for models with dual rear wheels only to give you a very nice stainless steel mirror finish look to your wheels. I've attached videos of each for you.
    view full answer...

  • Will Namsco Wheel Liners Work On 1992 P30 Coronado Motorhome With Balance Weights
  • I talked with our tire expert and asked about Budd rims and how to identify them. He told me that in order to tell if your rear wheel is a Budd rim you need to pull the outside wheel on the rear. If the inside wheel has studs then you have a Budd rim and the Namsco Wheel Liners, part # NA7195G0 will not work on your 1992 Chevrolet wheels. As far as the balance weights on the wheel, they use the studs to hold the wheel in place and do not snap over the edge of the rim so there will be...
    view full answer...

  • Do Lug Nut Covers WM8011 Hold On Wheel Liners or Just Cover the Lug Nuts
  • Wheel Masters Lug Nut Covers # WM8011 are just lug nut covers meant to enhance the appearance of the vehicle wheels. That is their only function. They fit on Ford 1-1/16 inch lug nuts.
    view full answer...




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.