Hey James! For a 2020 RAV4 I'm not entirely sure if that is too much or not. Does it feel like your braking is off when you carry everything? Are the headlights tilting up from the rear sag? Are you bottoming out? If any of these things are true…
Hi Curt! We do have options for your 2024 Thor Four Winds 28Z Class C motorhome on that 2023 Ford E-450 chassis, but the Roadmaster Rear Anti-Sway Bar #RM-1139-163 you found will only fit a 2015 to 2019 Ford E-Series Cutaway E-450, so it isn't…
Hey Tim, I checked with Demco and the bracket kit part #DM8552027 that you referenced is correct for your 2014 Chevy Silverado 1500. Do you already have the rails and the hitch?
Hey Alex, welcome back! There's a couple of options for spacers depending on how tall of a lift your 2014 Nissan Xterra has. Timbren recommends leaving a 1/2" gap between the item #TJRC01 and where they contact on your Nissan. How big of a…
I'm certainly sorry to hear that someone kicked off the driver's side mirror of your 2007 Acura TL, though I can verify for you that the mirror you asked about is a fit for your car, and it is indeed for the driver's side: - K-Source…
Thank you for your photo. We offer the K-Source Replacement Side Mirror #KSH3661 for your 1981 Ford Bronco; this is the item you referenced in your question. The top bracket does have only 2 holes, not 3, but it would be easy enough to drill the 3rd…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
Hey Trent, the CIPA tow mirrors part #CTM2300 that you referenced are not going to work for you as they are designed for much older versions of the Ford F-150 than your 2021 model. Instead, we have the K-Source part #KS69NQ which are a confirmed fit…
Hey Bear! Yes, you can lock up the coupler part of your Demco DA86 Actuator #DM68CV with either the Trimax Pin #TMX38SR, or the InfiniteRule #IR56FR if you're looking for a high-end lock. Is this the type of lock you had in mind?
Hey Ken, thanks for the pictures. That's the Reese Weight Dist Shank item #RP54970 in your pictures. It has standard adjustment bolt holes spaced 1-1/4" center to center. The BulletProof Hitches Weight Distribution Shank for 3" Hitches…
Hey Cecil. The Dexter E-Z Flex Suspension Kit item #K71-653-00 includes a set of shackle straps that measure 2-1/4" on center. They're going to be 3/8" shorter than what you currently have on your trailer, which is not going to be an…
Yes you can remove the mirror from the mounting bar it attaches to. There's actually two holes on the mount that you can use for the mirror to attach to. A bolt is what holds the mirror of the #CM41100 to the swiveling mount bracket.
