Menu Icon
shop gifts

Bumpers

Select Vehicle Year

  
Bumpers

Available Years for Bumpers


Replacement Bumper

Upgrade your current bumper or replace a damaged one with a custom-fit replacement bumper by Westin. Westin's Perfect Match series are a great alternative to expensive OEM bumpers, and many feature no-drill mounting kits for the easiest installation. Whether you are looking for style or utility, we offer the right bumper for your budget and needs, custom designed for a perfect fit on your vehicle. Constructed with high strength steel, these bumpers are sure to give you the looks and performance to enjoy for years to come!

Find the perfect fit for your vehicle by entering the year, make, and model to the left. We offer replacement bumpers for many popular vehicle manufacturers like Ford, Chevy, Dodge, GMC, and Toyota.


Search For Custom Fit Accessories
Select A Category Below




Bumper Videos

Buyers Products Bumper 3371809055 Review

Speaker 1: Today, we're going to take a look at the Flatbed/Flatbed Dump Hitch Plate Bumper with the two inch receiver. Now, this part is ready to mount on Ford F350, F450, and F550 trucks, and drilling will be required to fit on some GM trucks. This Flatbed Hitch Plate Bumper with the two inch receiver is designed to accommodate the longer overhang of flatbeds, and flatbed dump truck while still providing an ICC bumper protection. The ICC bumper, which stand for Interstate Commerce Commission is designed to prevent under ride protection. This is designed to handle a towing weight up to 17,000 pounds. It's a very versatile product.


Buyers Products Bumper 3371809025 Review

Speaker 1: Today, we're going to take a look at this 62 inch long, black vehicle ICC bumper. Now, this ICC bumper, ICC stands for Interstate Commerce Commission. This type of bumper provides underride protection. It is designed to attach to the rear underside of a large truck, to prevent a car from going underneath the truck, and causing major damage to the vehicle and its occupants. It is designed for trucks, only. The ICC bumper features a nice, heavy duty four inch structural steel C-channel construction, and a corrosion resistant black powder coat finish.A few measurements on this bumper, overall length, end to end is 62 inches long.


Rampage Jeep Rear Recovery Bumper Installation - 2012 Jeep Wrangler Unlimited

Today on our 2012 Jeep Wrangler Unlimited we'll be taking a look at and showing you how to install the Rampage Rear Recovery Bumper for Jeeps. Features a slim waist spare tire carrier and a textured black powder coat finish. Part number RA88606. It's also available in a semigloss black powder coat finish, part number RA86606. It's available without the swing-away feature in a textured black powder coat finish, part number RA88605, and without the swing-away feature in a semigloss black powder coat finish, part number RA86605. You can pick up a Rampage 2 inch Hitch Receiver separately with part number RA86611. Upgrade your Jeep's factory bumper to this sturdy steel Rampage Recovery Bumper.


Rampage Jeep Rear Recovery Bumper Installation - 2015 Jeep Wrangler Unlimited

Today on our 2015 Jeep Wrangler Unlimited, we'll be showing you how to install the Rampage Rear Recovery Bumper for Jeeps with a swing away spare tire carrier, part number RA88606. This recovery bumper is sturdy and built for off road use. This replaces your Jeep's rear bumper and spare tire mount with a heavy duty rear bumper and a swing away spare tire mount. Your spare tire is no longer mounted to your factory tailgate, it operates with the swing away arm. This allows you to carry tire sizes up to 37". The weight of the spare tire is now on the frame, rather than the tailgate. The bumper features welded shackle mounts with removable D rings. That way you can perform recovery operations.


Rampage Jeep Rear Recovery Bumper Review

Today, we'll be taking a look at the Ram Page rear recovery bumper for Jeeps with a swing away spare tire carrier. Part number RA88606. This recovery bumper is sturdy and built for off-road use. This replaces your Jeep's rear bumper and spare tire mount with a heavy duty rear bumper and a swing away spare tire mount. Your spare tire is no longer mounted to your factory tail gate. It operates with a swing away arm.


Westin Surestep Rear Bumper Kit Installation - 1986 Chevrolet CK Series Pickup

Today on our 1986 Chevrolet Silverado CK Series pickup, we will be taking a look at and installing the Western Phase Sure Step rear bumper with custom installation kit. This will be part number 21002-92230. This sturdy steel replacement bumper has a non slip pad along the top to add a sure grip for getting in and our of your truck bed, with built in hitch holes that offer three different mounting locations and an eight thousand pound towing capacity, with an eight hundred tongue weight rating. Now the hitch ball hole diameter is going to be around one inch. Just add a hitch ball, it will be sold separately and you're ready to tow. The chrome plating is going to add style and resist rust, while adding utility and a rugged good look to your vehicle.


Westin Surestep Rear Bumper Installation - 1986 Chevrolet CK Series Pickup

Today on our 1986 Chevrolet Silver ado CK Series pickup, we will be taking a look at and installing the Westin Fey Sure Step rear bumper with custom installation kit. This will be part number 21002. We will also be using the custom installation kit, part number 92230. This sturdy steel replacement bumper has a non-slip pad along the top to add a sure grip for getting in and out of your truck bed. With built in hitch holds that offer 3 different mounting locations and an 8,000 pound towing capacity, with an 800 pound tongue weight rating. Now the hitch ball hole diameter is going to be about 1 inch.


Westin Diamondstep Rear Bumper Installation - 1986 Chevrolet CK Series Pickup

Today on our 1986 Chevrolet Silverado CK series pick up, we're going to be taking a look at it and installing the Westin Fey Diamond step rear bumper, part number: 20000. We will also be using the custom installation kit, part number: 92230. This sturdy steel bumper replacement, is going to have a nice diamond tread surface to provide grip when you step in to your truck, has 3 integrated ball holes, and an 8,000 pound towing capacity. To make towing easy. Now the hitch ball hole diameter is going to be about 1 inch, just add a hitch ball, which will be sold separately, and you're ready to tow. Maximum towing capacity of 8,000 pounds and maximum tonne weight capacity of 800 pounds.


Westin Diamondstep Rear Bumper Installation Kit - 1986 Chevrolet CK Pickup

Today on our 1986 Chevrolet Silverado C/K Series Pickup, we're going to be taking a look at installing the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit, Part Number 20000-92230. This sturdy steel bumper replacement is going to have a nice diamond tread surface to provide grip when you step into your truck, has 3 integrated ball holes, and an 8,000-pound towing capacity to make towing easy. Now the hitch ball hole diameter is going to be about 1". Just add a hitch ball, which would be sold separately, and you're ready to tow. Maximum towing capacity of 8,000 pounds and maximum tongue weight capacity of 800 pounds. With license plate lights and wiring to just easily connect to your running lights and be fully legal 00:00:54. This custom bumper replacement adds both utility and a rugged good look.


Articles about Bumper



Bumper Questions and Answers

  • Can a Jeep Wrangler be Flat Towed by the Front Bumper
  • I have a solution for you, however, I would not recommend mounting a tow bar directly to a bumper on a Jeep, whether it is OEM or an aftermarket bumper like the Pavement Ends Front Bumper, # PE4390801. Jeep does not recommend towing the Wrangler with the OEM bumper because it was not designed to pull the weight of the vehicle. Also, mounting a tow bar to a bumper would require drilling. I spoke with my contact at Pavement Ends and she said drilling into this bumper would void the warranty...
    view full answer...

  • Replacement Rear Chrome Bumper for a 1995 Ford F-150 Eddie Bauer Edition
  • There are a few different chrome bumper options for the 1995 Ford F-150, see link. These are all universal fit bumpers. A Perfect Match (custom fit) is not available for the 1995 model year.
    view full answer...

  • Trailer Hitch with D-Rings Needed for Custom Flatbed/Dump Bed on a 1998 GMC K3500
  • It looks like you are trying to find something like the Buyers Products # 3371809055 which fits Cab and Chassis with a 34" Frame Width. This provides ICC bumper protection, has a max trailer weight rating of 17,000 lbs, and is made right here in the USA. Please note that if this weight rating exceeds the weight rating on your 1998 GMC K3500 pickup you will need to stay within the lesser of the weight ratings. Attached is a review video for you to check out. If you are looking for...
    view full answer...

  • What is the Correct license Plate Light Kit for a Westin Diamondstep Replacement Bumper
  • I spoke with my contact at Westin and he said that for the Diamondstep Replacement Bumper, # 63000-93800, you would need Westin Perfect Match Replacement Bumper License Plate Light Kit, # 00007153. The kit includes everything need for installation.
    view full answer...

  • How Thick is the Steel Used to Make Bulldog Stubby Jeep Bumper # BDW21000
  • The steel used to make Bulldog stubby bumper # BDW21000 is 1/4 inch thick.
    view full answer...

  • Front Receiver for 2000 Ford F250 4x4
  • If you do not have the blocker bar or sub-bumper behind the air dam, the Draw-Tite # 65022 would a good choice for your 2000 F250. According to the installation instructions, the tow hooks are temporarily removed but are re-installed later in the process. The Curt front mount receiver, part # 31114 will also work. It is nearly identical and would install in the same manner. I have provided a photo showing what the receiver would look like once installed.
    view full answer...

  • Availability of a Front Mount Hitch for a 2002 Ford F-250 Without Removing the Factory Fog Lights
  • The 2002 F-250 has two different styles of front end configurations. If your front end has the blocker beam behind the front bumper and the leaf springs mounted on the inside of the frame rails then you would use the Curt Front Mount Trailer Hitch Receiver, item # C31014, which will allow you to retain your factory fog lights. If your truck does not have a blocker beam installed and the springs are mounted underneath the frame, from the factory then you could use the Draw-Tite Front...
    view full answer...

  • Diamond Plate Rear Step Bumper and Brackets for 1966 Chevy Pickup?
  • I spoke with my contact at Westin and he told me that their bumpers only go back to 1967. Their engineers have not tested their bumpers past that date. I am sorry, there is no guarantee they will fit.
    view full answer...

  • Safety Chain Connection To Westin Bumper with Integrated Hitch Ball Holes
  • The Westin Fey Surestep Rear Bumper - Black Powder Coated Steel # 61001 is rated to haul up to 3,500 lbs and will need a hitch ball with a 3/4 inch shank. I recommend # 19258 for a 2 inch ball or # C40001 for a 1-7/8 inch ball. The bumper has integrated holes for the safety chains on either side of the hitch ball. These holes will allow for the S-hooks of your safety chains like # 2118-348-04 to connect quickly and easily but are not compatible with clevis hooks. I've attached an image...
    view full answer...

  • What is Included with Bestop HighRock 4x4 - High Access - Front Bumper with Winch Plate, # B4291701
  • The tubular grille guard that you see in the photos of the Bestop HighRock 4x4 - High Access - Front Bumper with Winch Plate, # B4291701, is not included but can be added in black, # B4290601, or stainless steel, # B4290600. The D-rings, # B4292100, and Approach/Departure Roller, # B4290501, are also sold separately. I have included a link to the installation details for reference.
    view full answer...

  • Can 2006 Jeep Wrangler be Flat Towed Behind RV Using Bulldog Stubby Bumper
  • Yes you can use the Bulldog Stubby bumper # BDW21000 for flat towing your 2006 Jeep Wrangler. After installing the bumper you will just need the right components to flat tow the Jeep using the bumper. You will need brackets # BX88303 and a compatible tow bar. I recommend the Alpha, # BX7365, since it is rated for 6,500 pounds and comes with safety cables. Next you will need a lighting solution. I recommend diode kit # RM-154 because once it's installed you will not have to worry about...
    view full answer...

  • Dimensions of the Bulldog Stubby Front Bumper # BDW21000
  • I contacted Rampage to get the dimensions of the Bulldog Stubby Front Bumper # BDW21000 that you referenced and he sent me basically every dimension available for it. I attached the dimensional drawings for you to check out.
    view full answer...

  • Rear Bumper Compatible With 2004 Chevy Silverado 1500
  • The Westin # 66000 is not a fit for your 2004 Chevy Silverado 1500, however we do have a bumper that is confirmed to fit your truck. It is the Westin Perfect Match Series Rear Step Bumper - Chrome Plated Steel # 31006 or # 32006 in gray powder coat.
    view full answer...

  • Replacement Bumper for a 2000 Dodge Dakota Quad Cab
  • We have 2 perfect match bumpers that will fit your 2000 Dodge Dakota Quad Cab as long as it is an R/T, SLT, or base model. For chrome plated steel use # 31012. And for gray powder coat steel use # 32012. The universal bumpers will not fit Quad Cab models.
    view full answer...

  • Black Painted Step Bumper Options for Ford Ranger Pickup Truck
  • Westin does offer two powder coated black bumper choices for a 1993-2004 Ford Ranger, in steel with a black textured step on the top of the bumper, part # 66001-97200 or in black steel with a diamond tread top, part # 66000-97200.
    view full answer...

  • Aftermarket Rear Bumper Fits on 2000 Dodge Dakota Quad Cab
  • All four of the aftermarket rear bumpers we offer for the 2000 Dodge Dakota can be seen on the link at right. You are correct that two of these are excluded for the Quad Cab version, the Westin Fey Diamondstep bumpers # 63000-93800 and # 73000-93800. These are custom-fit bumpers intended to bolt on without drilling, and the normal mounting holes for these are not accessible on the Quad Cabs. The other two Westin bumpers from their Perfect Match Series, grey # 32012 and chrome # 31012,...
    view full answer...

  • Replacement Bumper Options for a 1997 GMC C/K Series Pickup Truck
  • The Westin Diamondstep Replacement Bumper, # 20009-92230, fits the 1988 to 2000 GMC and Chevy C/K series trucks, like yours, as long as they are not a step side. We also have the same design in a silver powder coat, # 20008-92230 For a Perfect Match bumper that uses the OEM mounting brackets you can use # 31000 for a chrome finish or # 32000 for a black powder coat finish. We also have the Surestep bumper that will fit, # 21003-92230.
    view full answer...

  • Rear Bumper For 2004 Dodge Dakota Quad Cab
  • I spoke with my contact at Westin and they told me the Westin Bumper for the Dodge Dakota, part # 31012, would be a fit for your 2004 Dakota Quad Cab. This bumper has 3 hitch ball holes and is capable of towing up to 3000 lbs. It features an easy bolt-on installation and includes the mounting hardware. We also offer the same bumper style in gray powder coated steel, part # 32012.
    view full answer...

  • Which Adapters Work with the Bulldog Stubby Front Bumper Part # BDW21000 for a 2005 Jeep TJ
  • Yes, the Bulldog Stubby Front Bumper part # BDW21000 for your 2005 Jeep TJ is rated for flat-towing. Unfortunately, there is no way around using an adapter as none of the towbars will come off the shelf ready to couple to this bumper. You will need to use an adapter like part # BX88303 for Blue Ox tow bars or part # RM-035 for Roadmaster tow bars. For a Blue Ox tow bar I recommend using the Blue Ox Alpha Tow Bar part # BX7365 which has a 6,500 lb weight capacity and comes with safety...
    view full answer...

  • Installing the License Plate Lights on the Westin Fey Diamondstep Rear Bumper
  • I believe you are talking about the license plate light covers for the Westin Fey Diamondstep Rear Bumper, # 63000-93800. Is that correct? If so, the light covers simply pop into the holes that are located on both sides of the license plate area. The socket with the wire leads is then plugged into the back of the light covers.
    view full answer...




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.