shop gifts
shop gifts

Vehicle Engine Heaters

Select Vehicle Year

  
Vehicle Engine Heaters

Available Years for Vehicle Engine Heaters



What our customers are saying:

Thank you so much for your prompt service. Heidi

Heidi

Madison, MS


Search For Custom Fit Accessories
Select A Category Below




Vehicle Heaters Videos

Kats Heaters Vehicle Heaters KH11441 Review

Speaker 1: Today we're taking a look at the Kats Heaters custom engine block heater. Now this unit is designed to ensure smoother start ups and faster heating and defrosting of your cab. It does replace the frost plug or core plug in the engine block and it simply submerges in coolant. It's designed to warm the engine fluid, to increase lubrication and overall performance. And it really helps keep the fluid from thickening and it protects against damage in colder weather. The unit also preheats the engine to reduce condensation in the engine block, which emits less pollution and fewer gas emissions.It does come with the removable power cord, so it simply just plugs into the housing right here.


Kats Heaters Vehicle Heaters KH30503 Review

Speaker 1: Today we're gonna be taking a look at the Kats Heaters Custom Diesel Engine Block Heater. Now this unit ensures smoother start ups, and faster heating and defrosting of your cap. Simply installs in the engine block and submerges in coolant. It's designed to warm the engine fluid which really increases lubrication and overall performance, and it keeps the fluid from thickening which protects against damage in colder weather. It also preheats the engine to reduce condensation in the engine block. It does come with the removable power cord so if you're power cord ever gets damaged you just have to replace the power cord and not the entire unit.


Kats Heaters Vehicle Heaters KH31108 Review

Today, we're going to be taking a look at the Kat's Heaters Custom Diesel Engine Block Heater. This going to ensure smoother startups and faster heating and defrosting of your cab. It's going to replace the frost plug or core plug in the engine block and then it submerges in coolant. The area right here that needs to fit into the engine block where you're going to need to install the unit, that has a diameter of 2 1/4 inches, has a tightening device on there so that way you can ensure a nice tight secure fit and it's going to come with the appropriate seal. This is designed to submerge in coolant. It's going to warm engine fluid to increase lubrication and performance.


Kats Heaters Vehicle Heaters KH11487 Review

Today, we're going to be taking a look at the Kat's Heaters Custom Engine Block Heater. This is a frost plug style. This unit ensures smoother start-ups and faster heating and defrosting of your cab. It replaces the frost plug or core plug in the engine block. It's designed to submerge in coolant. It's going to help warm the engine fluid to increase lubrication and performance.


Kats Heaters Vehicle Heaters KH11465 Review

Today we're going to be taking a look at the Cat's heaters customer engine block heater. This is a frost plug style. It ensures smoother start ups and faster heating and defrosting of the cab. It replaces the frost plug, or core plug, in the engine block and submerges in coolant. It's designed to warm engine fluid, which is going to increase lubrication and performance. It also keeps fluid from thickening, and protects against damage and cold weather. It simply preheats the engine, which is going to reduce condensation of the engine block.


Kats Heaters Vehicle Heaters KH11479 Review

Today we're going to be taking a look at Kats Heaters custom engine block heater frost plug style. This ensures smoother start ups and faster heater and defrosting of your cab. It replaces the frost plug or core plug in the engine block and submerges in coolant. It's going to warm the engine fluid which is going to help increase lubrication and performance. It simply keeps the fluid from thickening and it protects against damage in colder weather. It's also designed to preheat the engine, to reduce condensation in the engine block so it's going to emit less pollution and fewer gas emissions. It includes the removable power cord, so it's just plugged in there to the end of this area right here.


Kats Heaters Vehicle Heaters KH37500 Review

Today we're going to be taking a look at the Kat's Heater Ceramic Interior Heater with fan. This is going to keep the interior of your car, truck, boat, camper or RV. It can also work as a defroster. It plugs into a 12 volt power outlet. The power cord itself is going to measure around 5 feet long. The unit's going to feature state of the art circuit inaudible 00:00:22 so that's going to ensure a low current draw.


Kats Heaters Vehicle Heaters KH11431 Review

Today we're going to be taking a look at the Kat's Heaters custom engine block heater. This is a frost plug style. It's going to ensure smoother start-ups and faster heating and defrosting of your cab. Simply replaces the frost plug or core plug in the engine block and submerges in coolant. This also is designed to help warm the engine fluid, which is going to increase lubrication and performance. What that does is it keeps the fluid from thickening and protects against damage in colder weather.


Kats Heaters Vehicle Heaters KH11407 Review

Today we're going to be taking a look at the Kats Heaters Custom Engine Block Heater Frost Plug Style. This ensures smoother start-ups and faster eating and defrosting of your cab. It replaces the frost plug or core plug in the engine block and submerges in coolant. This is going to warm your engine fluid to increase lubrication and performance. What that does is it simply keeps the fluid from thickening and it protects against damage in colder weather. It also helps preheat the engine to reduce condensation in the engine block.


Articles about Vehicle Heaters



Vehicle Heaters Questions and Answers

  • Where Does Engine Block Heater in a 2016 Toyota Tundra with V8 Engine
  • I checked with Kat's and they state that the slot location for installing the Kat's Block heater part # KH11813 on your 2016 Toyota Tundra with a 5.7 liter is in the left rear area of the block. It will be in a similar spot as what you see in the install video I attached.
    view full answer...

  • Where to Install Block Heater on a 2015 Hyundai Santa Fe with 2.4 Liter 4 Cylinder
  • I checked with Kat's and they say that the cartridge heater will install in the front left location of the block. If you check out the chart I attached you can see where you will see where that it is.
    view full answer...

  • Does Kat's Heaters # KH13150 Include Installation Instructions
  • The # KH13150 does include installation instructions. According to Kat's Heaters, the circulating engine heater installs inline with the heater hoses, for a rather simple installation. We don't have any photos available, according to Kat's, the instructions are pretty self-explanatory. If you have average mechanical ability, you shouldn't have any problem installing the heater.
    view full answer...

  • Installation Location And Instructions For Kat Heater's Cartridge Block Heater On 2016 Kia Sorento
  • The installation location for your Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts, # KH11812, on your 2016 Kia Sorento with 2.4L engine is the 2nd RR. This is the location 2nd from the right in the rear of your block, so passenger side toward trunk second from right. 1) Locate cartridge hole on the engine block. 2) Clean cartridge hole of all debris. Use compressed air. 3) Attach cord to heater. 4) Install heater into the hole. Rotate the clip on...
    view full answer...

  • Where Does Kat's Heater Install in 2016 Toyota RAV4
  • According to Kat's the part # KH11813 will install in the RL or rear left cartridge. If you were facing the engine with the hood up it would be just around the driver side corner of the engine. It does not come with a cover as it basically just slips right into the cartridge hole.
    view full answer...

  • Engine Block Heater Recommendation for a 2012 Toyota Camry
  • The Kat's engine block heater # KH11813 installs in a cartridge hole on the engine block. Once you locate the cartridge hole, clean the hole of all debris. You can use compressed air. You don't need to open the coolant system because the heater installs in the cartridge hole of engine block. Attach the cord to the Kat's heater # KH11813 and install the heater in the cartridge hole of your engine block and rotate the clip on the cord to secure the heater and cord to the engine block...
    view full answer...

  • Where Does a Cartridge Block Heater Install on a 2016 Kia Soul
  • Kat's heater # KH11812 will fit the 2016 Kia Soul with either the 2.0 liter motor or 1.6 liter motor. The fit is dependent on the motor and not the trim of the vehicle in this case. I don't have a picture but on the 1.6 liter models the installation location is at the right rear of the motor. For the 2.0 it is likely at the left front of the motor.
    view full answer...

  • Where Does the Kat's Block Heater Install on a 2016 Toyota Corolla
  • The Kat's cartridge block heater # KH11813 installs in the block hole on your 2016 Toyota Corolla. It is located on the rear driver's side (left) of the motor. To give you an idea of what you are looking for I included a link to a video showing the same heater being installed on another vehicle it fits.
    view full answer...

  • Engine Block Heater and Installation Recommendation for a 2007 Honda Pilot
  • For your 2007 Honda Pilot with a 3.5 liter V6 engine you will need to look on the front left side of the motor for a 28 mm sized cap or fitting. You will need to unthread that and then thread the # KH11419 in place of it.
    view full answer...

  • Recommended 12V Heater for Motorhome
  • For your 12V RV heater replacement, I recommend the Rampage Radiant Backseat Heater - 300 Watt - 12 Volt # RA3501. This heater has and integrated swivel mount and is 8 inches tall x 7 inches wide x 6 inches deep. I've attached a video to assist. Another even more portable option is the Performance Tool 12-Volt Heater and Defroster # PTW5009. This unit plugs into a 12V aux power port and has an integrated 15 amp fuse.
    view full answer...

  • Engine Block Heater for a 2015 Kia Sorento with 2.4 Liter Motor
  • I spoke with my contact over at Kat's and found that cartridge style block heater # KH11812 will also fit your 2015 Kia Sorento with 2.4 liter motor.
    view full answer...

  • Troubleshooting Block Heater that Is Difficult to Install in 2015 Toyota Tacoma
  • As long as you have found the correct hole in your 2015 Toyota Tacoma the Kat's heater part # KH11813 would be correct for it and should slide right in. Since the hole is somewhat difficult to access you are most likely not angling it in correctly. Make sure you are trying to install it in the correct hole (see pic) and that it is lined up perfectly square as you insert it. We have heard that the catalytic converter bracket on the 2015 model can be somewhat in the way too.
    view full answer...

  • How Hot Does the Kat's Heaters Oil Pan Heating Pad # KH24050 Get
  • The element of the Kat's Heaters Oil Pan Heating Pad # KH24050 gets surprisingly hot. Kat's says it will get between 300 and 400 degrees.
    view full answer...

  • Engine Block Heater Fit for 2014 Toyota Camry with 4 Cylinder Engine
  • The 2014 Toyota Camry Kat's Heaters Custom Fit Engine Block Heater, # KH11813, is the correct fit for your 2014 Toyota Camry with 4 cylinder engine. We have confirmed the fit of this specific heater with Kat's Heaters. This product is a custom fit, meaning it will only fit certain vehicles. Both your 2014 Camry and the 2016 Tacoma in the video are a custom fit for this specific part that is why that video is linked to this product page. This heater simply clicks into the cavity of...
    view full answer...

  • Block Heater Recommendation for a 2003 Dodge Sprinter
  • To install the Kat's Heaters Custom Fit Engine Block Heater # KH11814 you will need to locate the cartridge hole on the block, which for a Chrysler it will be on the left or right rear of the block. You will need to clean the hole out and then apply silicone to the hole and the # KD11814 and then insert the heater. No coolant will need to be drained or lost. Once installed in the hole the heater will warm the block and surrounding coolant and oil. For a simpler install you could go...
    view full answer...

  • Engine Block Heater Compatible with 2013 Ford Escape 1.6L
  • The Kat's Engine Block Heater # KH11409 is designed for the 2.0L and 2.5L models of the 2013 Ford Escape. For your 1.6L the correct block heater is part # KH11488 as long as you do not have the EcoBoost engine.
    view full answer...

  • Where to Install Block Heater on a 2011 Hyundai Elantra
  • The cartridge to use to install the Kat's heater part # KH11812 that you referenced is on the front side of the engine on the passenger side as you face the engine with the hood up.
    view full answer...

  • Does the Kats In Line Lower Radiator Hose Coolant Heater Circulate the Coolant
  • Kat's lower radiator hose in line heater # KH16500 does not circulate fluid with a mechanical pump. It is just a heater that operates on the principal of thermosyphoning. It will definitely help keep the fluid warm at 600 watts power but it will take it a longer time than a unit with a mechanical pump. For a true circulating heater with a mechanical pump you could use # KH13100 for 16 to 25 quart systems. If the vehicle has a higher capacity than 25 quarts we do have heaters for the...
    view full answer...

  • Where Does Kat's Heaters Block Heater Install on a 2014 Hyundai Elantra
  • On the 2014 Hyundai Elantra with 1.8 liter motor Kat's Heaters block heater # KH11812 installs in the block hole located at the right (passenger's side) front of the motor. In the pictures I have included it is in the FR position on the diagram for transverse engines.
    view full answer...

  • Kat Heaters Frost Plug Style Block Heater Installation
  • The engine block heater I recommend is the Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 400 Watts - 34 mm, # KH11415. It is a confirmed fit for your 2001 Buick Century 3.1. The easiest mounting location for your vehicle will be the center rear of your block. The element must face 9 o'clock position to avoid contact with engine wall. This how you will install it. 1. Drain and flush radiator and block. 2. Remove correct frost plug or core plug - depending...
    view full answer...




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.