Menu Icon

Trailer Jack

Select Vehicle Year

  
Trailer Jack

Available Years for Trailer Jack



What our customers are saying:

I just had to write to let you know how very satisfied I was to receive your products. Within an hour or so everything was mounted and functional. Everything fit perfectly and with very little effort. I will recommend your site to all my friends who have a trailer need. Thank you very much indeed.

Edgar

Saint Petersburg, FL


Search For Custom Fit Accessories
Select A Category Below




Trailer Jack Information Videos

Rebuilding Fulton 1500lb-2500lb Jacks

Today we're going to be showing you how to rebuild the Fulton 1500 to 2500 pound Jacks. We're going to be using the Bevel Kit, which is part number F0933306S00. The Bevel Gear Kit, they're going to be the same gear both for our upright and for our drive gear. You can see they've been designed to work universally with one another. We've got a new washer in which this rides on. That gives an area for our friction to go so it's not wearing on our Jack.




Trailer Jack Videos

Review of Bulldog Trailer Jack - A-Frame Jack - BD150037

Today we're gonna take a look at the Bull Dog A-frame jack. This is gonna be a top wind style with a max lift rating of 2,000 pounds. Now, Bull Dog is gonna be a very trusted name in the industry. They're gonna be a great jack for multiple agricultural and commercial applications. It's going to have that top wind grip. As you can see, we have our red handle.


Lippert Scissor Stabilizer Jacks with Handle Review

Speaker 1: Today, we're going to be taking a look at the Lippert Component Scissor Stabilizer Jacks with Handle and offering a 6000 pound per jack capacity, the part number is LC285344.Stabilizer jacks are essentially a very critical part to camper life. They're going to stabilize our camper. Keep it from moving around. It's not so important really, during the day. You don't want a lot of movement in your camper of course, during the day, but as people start to go to sleep, other people stay up a little bit later, as you're getting in and out, you can really disturb that. Your campers going to move back and forth.


Lippert Scissor Stabilizer Jacks with Handle Review

Speaker 1: Today we're gonna take a look at the Lippert Components Scissor Stabilizer Jacks with Handle, offering 24-inches of lift and a 6500-pound per jack capacity. The part number is LC285326.Stabilizer jacks are essentially a very critical part to camper life. They're gonna stabilize our camper, keep it from moving around. So it's not so important really during the day; you don't want a lot of movement in your camper, of course, during the day. But as people start to go to sleep, other people stay up a little bit later, as you're getting in and out you can really disturb that. Your camper's gonna move back and forth.


Ultra-Fab Ultra Scissor Jacks Review

Speaker 1: Today we're gonna be taking a look at the Ultra-Fab ultra scissor jacks. For the two-pack with crank handle part number's UF48-979031. And for a single replacement, part number is UF48-979032.They're gonna stabilize our camper, keep it from moving around. So it's not so important really during the day. You don't want a lot of movement in your camper, of course, during the day, but as people start to go to sleep, other people stay up a little bit later. As you're getting in and out, you can really disturb that.


Ultra-Fab Ultra Scissor Jacks Review

Speaker 1: Today we're gonna be taking a look at the Ultra-Fab ultra scissor jacks. For the two-pack with crank handle part number's UF48-979031. And for a single replacement, part number is UF48-979032.They're gonna stabilize our camper, keep it from moving around. So it's not so important really during the day. You don't want a lot of movement in your camper, of course, during the day, but as people start to go to sleep, other people stay up a little bit later. As you're getting in and out, you can really disturb that.


Ultra-Fab Ultra Scissor Jacks Review

Speaker 1: Today we're going to be taking a look at the Ultra Fab Ultra Scissor Jack. For a two-pack the part number is UF48-979002, and for just one, part number is UF48-979006. They're going to stabilize our camper, keep it from moving around. It's not so important, really, during the day. You don't want a lot of movement in your camper, of course, during the day, but as people start to go to sleep, other people stay up a little bit later. As you're getting in and out, you can really disturb that.


Ultra-Fab Ultra Scissor Jacks Review

Speaker 1: Today we're going to be taking a look at the Ultra Fab Ultra Scissor Jack. For a two-pack the part number is UF48-979002, and for just one, part number is UF48-979006. They're going to stabilize our camper, keep it from moving around. It's not so important, really, during the day. You don't want a lot of movement in your camper, of course, during the day, but as people start to go to sleep, other people stay up a little bit later. As you're getting in and out, you can really disturb that.


Lippert Components Trailer Jack - A-Frame Jack - LC733926 Review

Speaker 1: Today we're taking a look at the Lippert quick drop tongue jack. Now this utility jack lets you raise and lower your A-frame trailer. This is perfect for agricultural and commercial applications. The mount holes on the mounting bracket make a triangular shape, with each hole separated on center by around 3" from the other. Mounting hardware not included. It does feature a lift capacity of 2,000 pounds.Now this unit features a topwind handle.


Articles about Trailer Jack



Trailer Jack Questions and Answers

  • How to Choose the Correct Replacement Trailer Jack With Enough Ground Clearance on Rough Terrain
  • When choosing a jack for your trailer you will want to remember that the jack is not going to be lifting the entire weight of the trailer. You should choose a jack that exceeds the tongue weight of your trailer when it is fully loaded. The tongue weight of a trailer is typically calculated as 10 to 15 percent of the trailer weight. I would recommend finding the gross trailer weight rating (GTWR) which is the maximum weight that your trailer can support and choose a jack that is rated...
    view full answer...

  • 2-Speed Electric Trailer Jack to Replace Manual Jack on 3 Horse Slant Trailer With Living Quarters
  • The Bulldog Square Jack you referenced, part # BD182400, is a weld-on single speed jack rated at 10,000-lbs lift capacity. This jack can be used with a single-speed power drive kit, part # BD1824200100. For two-speed operation you will need a jack with a two-speed planetary gearbox, such as Bulldog 2-Speed Jack, part # BD183401. With this jack you can use powered-Drive Kit # BD1824180100 but please note that my contact at Bulldog advised that when using the power drive kit on this jack...
    view full answer...

  • Trailer Dolly Recommendation for Moving a Boat Trailer in and out of a Garage
  • The Fulton F2 Swing-Up Trailer Jack # F1413020134 that you referenced would certainly be capable of moving your trailer around as long as the tongue weight of your trailer does not exceed the 1,600 lb capacity of the jack. However, it would not be nearly as easy as using a Trailer Valet Swivel Jack and Trailer Mover # STC-V211. I believe I have something that would be ideal for you. Since you are looking for an easy way to move your trailer in and out of your garage I think you might...
    view full answer...

  • What Weight Capacity of Tongue Jack is Needed for a 4,600 Pound Dry Weight Trailer
  • The rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that is rated for more than the tongue weight is not a problem. The jack you were looking at Pro Series A-Frame Topwind Jack, part # PSEA20000103, would work fine. You could also use Dutton-Lainson jack, part # DL22530 or Bulldog Heavy Duty...
    view full answer...

  • Replacement Fulton Jack for a Ranger Boat Trailer
  • It is possible that Fulton jack # FTJ120W0301 is the same jack that is used on your Ranger boat trailer. If your current jack is a side wind swivel jack with 10 inches of lift and rated for 1,200 pounds AND it mounts to a bracket welded to the trailer frame and held to it with a snap ring, then yes, this is the correct jack. I have linked a video review of this jack for you. I have also included a link to all of the Fulton side winding swivel jacks for you.
    view full answer...

  • Replacement for Shelby # 5756 1200 lb Jack
  • The Shelby # 5776 is the direct replacement for the # 5756, but we do not offer that particular jack. The Fulton # FTJ120W0301 that you referenced would make an acceptable replacement. The capacity and the amount of lift or travel is identical. Both jacks are weld-on applications and both have a corrosion inhibiting zinc plated finish. The Fulton jack dimension from the bottom of the mounting bracket to the bottom of the caster when fully retracted is 13 inches, 23 inches when fully...
    view full answer...

  • How to Pick Out a Trailer Jack for a Boat Trailer
  • The best way to pick out a jack is to pick out one that has enough capacity to handle the tongue weight of your trailer. Typically, tongue weight is 10-15 percent of the total weight of the trailer. So lets say your boat and trailer weight a total of 10,000 lbs. Most likely you would have a tongue weight of 1,000-1,500 lbs. Without knowing your tongue weight but knowing the weight of your boat I think a 2,000 lb jack like the Bulldog Round Jack part # BD151443. Review video attached....
    view full answer...

  • Low Profile Trailer Jack Recommendation for Better Tailgate Clearance
  • Sounds like you are looking for a lower profile jack for your trailer so that the tailgate of the vehicle does not interfere with it. I went to our warehouse and was able to locate an a-frame jack that measured less than 12 inches from the bracket up. The Bulldog Round A-Frame Jack, # BD155032, comes in just under 11-1/2 inches which included the handle. I have attached a picture to illustrate the measurement. This a-frame jack has a lift capacity of 5,000 pounds and mounts to any...
    view full answer...

  • Best Swivel Trailer Jack for Salt Water Environment for a Boat Trailer
  • The problem that some people have with the Fulton F2 jacks such as # F1413040134 is that they are not used to seeing plastic pieces on a trailer jack. If you are rough with a piece of plastic, it can break. But at the same time plastic is not going to corrode. If the jack is abused a person could have trouble with it. The metal parts of the jack are aluminum which is naturally corrosion resistant. Other jacks are going to be made of steel and zinc-plated or coated. Steel can rust, even...
    view full answer...

  • Which is Better, a Side Wind Trailer Jack or a Top Wind Trailer Jack
  • You would choose a side wind or top wind jack based on several factors. Each has its advantages. If clearance is an issue for the radius of a top wind, then you would choose a side wind. The opposite is also true. It is my experience that a side winding jack is easier to turn. However, if the tongue is low to the ground a top wind would be a better option because you would not have to bend down as much and it would not be as awkward to turn. A side winding jack normally has inner components...
    view full answer...

  • Availability of Trailer Swivel Jack with Pneumatic Tires
  • If the tongue weight of your trailer is less than 500 lbs, the Trailer Valet Swivel Jack and Trailer Mover, part # STC-V211 might be a good choice. The jack swings up next to the trailer frame so it'll be out of the way of your truck tailgate and the jack features two pneumatic tires. This is the only jack we offer with pneumatic tires. If you click the provided link, you can see a demonstration video of the jack. The wheels on the jack are actually driven by one of the crank handles on...
    view full answer...

  • Do Trailer Jacks with Two Wheels Make it Easier to Maneuver a Jack on Concrete
  • Having 2 wheels will provide more surface area/contact with the ground. This could actually make it more difficult to maneuver compared to a single wheel. But two wheels are better than one when not on pavement. A single wheel tends to dig into dirt or gravel easier. A Fulton jack such as # FXPD15L is going to be the better jack compared to the MaxxTow line of jacks. I do recommend going with a Fulton. For a single wheel version use # FXP15L.
    view full answer...

  • Difference in Side Wind Operated A-Frame Jack and Top Wind A-Frame Jack
  • The choice between a side wind jack like the Bulldog Round, A-Frame Jack - Sidewind, part # BD1700100317, and a top wind jack like the Bulldog Round, A-Frame Jack - Topwind, part # BD155032, will usually be for clearance issues. A top wind jack will be used when there is something on the trailer that will interfere with the rotation of the side wind handle on the jack and a side wind jack would be used if there is interference for the top wind jack handle. If the clearance issues are...
    view full answer...

  • Will the Replacement F2 Swivel Jack fit a Mastercraft Boat Trailer with Weld On Swing Up Jack Plate
  • To determine if the Fulton F2 Swing-Up Trailer Jack with Dual 7 inch Wheels, Sidewind -1,600 lbs - No Mounting Hardware, item # F1413100334, will bolt directly to the old bolt through mount, without cutting it off, you will need to measure the bolt pattern on your trailer. I went out to the warehouse and measured the bolt mounting pattern on the Fulton F2 Swing-Up Trailer Jack, item # F1413100334, and the bolt holes are 3-3/8 inches on center by 4-3/8 inches on center. If you determine...
    view full answer...

  • Bolt-On Trailer Swivel jack that Mounts to a Trailer Using 1 Center Bolt
  • The Fulton jack # FXP15, is not meant to be mounted through the center bolt. It is designed to use the included mounting hardware that fits around the trailer frame. This will allow it to operate correctly and support the weight it is rated for (1,500 pounds). You can use the Fulton jack, # FXP15W. This unit requires a mounting plate, # P9012-00, that welds to the trailer frame.
    view full answer...

  • Replacement Drop Leg Recommendation for a Fulton Magnum Series 2500 lb Jack
  • I spoke to my contact at Fulton and he informed me that for a replacement drop leg for your Fulton Magnum Series jack you would want a Bulldog Square Drop Leg # BDDF3500. This should work well for you.
    view full answer...

  • Drop Leg Jacks Needed for Loading Equipment on a 14,000 lb Equipment Trailer
  • The Pro Series Square Jack - Drop Leg w/ Spring Return, # PS1400950376, that you referenced would work well for your trailer, but you would most likely have to do some fabrication to install this jack on each side at the rear. The outside dimension of this jack is 4 inches square. I produced a short video showing 3 jacks, the one you mentioned, the same jack without a spring return drop leg, # PS1400990376, and an 8,000 lb jack, # PS1400800383, that would most likely work also. Two...
    view full answer...

  • Comparing the Fulton F2 Trailer Jacks with 1 Wide Wheel or the Twin Track Wheels
  • For ease of maneuverability, I would go with the twin track Fulton F2 Trailer Jack, # F1413020134. The two wheels will have more ground surface contact and the weight will be better distributed with 2 wheels which are both good features on soft ground. Jacks are good for short distances but for a better solution you may be interested in the Buffalo Tools Trailer Dolly, # BTTRDOLLY. It has a 1-7/8 inch diameter ball and is good for up to 600 pounds tongue weight.
    view full answer...

  • Will Trailer Valet Work On Grass And Gravel To Move 20 Ft Boat And Trailer
  • The Trailer Valet, part # STC-V211 may work with your lawn if the ground is not soft, and your tongue weight is not excessive. The gravel may be another issue. If the gravel is loose and does not provide a solid footing it would be difficult to move the # STC-V211 with the boat attached. I have attached a product review video of the Trailer valet you can check out. The cranking that powers the drive system would depend on how level the ground is and if there is solid footing for the...
    view full answer...

  • How to Lubricate the Bulldog Top Wind Round A-Frame Jack # BD155032
  • According to the installation instructions for the Bulldog Top Wind Round, A-Frame Jack, # BD155032, the only maintenance needed is applying a light machine oil to the stem that the handle attaches to. The installation instructions also recommend thoroughly rinsing the jack with clean water before lubrication. I went out to the warehouse and looked at one of these jacks and there is no point in the top of the jack for insertion of grease. You could insert grease from the bottom of the...
    view full answer...




^
About Us
photos and videos
1,056,204 Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570 Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511 Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+ Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
73 Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357 Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.