shop gifts
shop gifts

Save Up To 20 Percent on Select Torklift Products

Camper Tie-Downs

Select Vehicle Year

  
Camper Tie-Downs

Available Years for Camper Tie-Downs


Truck Bed Camper Tie Downs

Ready your truck to haul a camper with sturdy, custom-fit tie-downs. Tie-downs can provide attachment points at the front and rear of your truck bed for securing a bed-mounted camper. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look.

Camper tie-downs are available for many of the most popular trucks such as Ford, Dodge, Chevy, and GMC. Find custom-fit camper tie-downs for your truck by entering the year on the left.




Camper Tie Downs

Enter the year, make and model of your truck above to find custom fit camper tie-downs to secure your truck bed camper. We offer camper tie-downs for many types of trucks including Ford, Dodge, Chevy, GMC, Honda, Toyota, and Nissan.


Camper Tie Down Accessories



Camper Tie Down Manufacturers

Search For Custom Fit Accessories
Select A Category Below




Camper Tie-Downs Videos

Brophy Camper Tie-Downs HSBP Review

Speaker 1: Today we're taking a look at the Brophy clamp on camper tie-downs. Now these tie-downs provide attachment points for securing your camper to your truck bed. The wide clamps provide superior holding strength.The unit also comes with neoprene pads that are designed to protect your truck's paint. That's a peel and stick design, so it's got adhesive backing on it. And those would get applied to these T-bars right here, and that's the portion of the clamp that makes contact with the inside of the truck bed. But it does 12 of those neoprene pads, so you can place those anywhere on the clamps that make contact with the truck, to protect the finish on your truck.Now this is a strong and durable construction.


TorkLift Camper Tie-Downs TLS9527 Review

Speaker 1: Today we're taking a look at the Torklift locking fast gun turnbuckles. The turnbuckles secure your camper to the tie downs mounted on your truck, so these are designed for bed mounted campers. The lever action handles makes the turnbuckles very easy to operate, so when you're ready to secure it all you have to do is push down on the handle once the hooks are in place to tighten, and then to release you just lift up on the handle. It's a really nice, easy to use design. It's a spring loaded design, which really helps to reduce stress on the tie down points.The unit features spring tension indicators on both the driver's and passenger's side for simple set up. The round O-ring is used only as a gauge to set your spring tension, and you can adjust that as necessary per the instructions.


TorkLift Camper Tie-Downs TLS9522 Review

Speaker 1: Today we're going to take a look at the Torklift FastGun Stainless Steel Turnbuckles for frame-mounted camper tie-downs for a quantity of two. Now standard turnbuckles that are on your camper, they usually have to be manually tightened, which can begin to be a bit of a chore. With these fastgun built-in quick release levels on these turnbuckles makes a very fast and easy to secure your truck bed camper to your vehicle.Basically, just hook one end of your turnbuckle, right here, onto your camper, hook the other end, right here, onto your camper tie-down that's mounted to your truck's frame. Then to tighten the turnbuckles, all you have to do is lift this lever action handle down. It's that simple.Pins are included. You can see I have one installed here.


TorkLift Camper Tie-Downs TLS9520 Review

Speaker 1: Today we're gonna take a look at the TorkLift FastGun stainless steel turnbuckle for bed-mounted camper tie downs. This is for a quantity of two. Now standard turnbuckles that are on your camper have to be manually tightened, which can get to be a bit of a chore. What's nice with these, these FastGun built-in quick release levers on these turnbuckles make it very fast and easy to secure your truck bed camper to your vehicle.Basically all you have to do is open that up, hook this one end to your camper, put the other end right here to the camper tie downs that are mounted on your truck's bed. And to tighten the turnbuckles, you just flip this lever action handle down. That simple.


TorkLift Camper Tie-Downs TLS9522-2-LK Review

Speaker 1: Today we're going to be taking a look at the TorkLift Locking Fastgun turnbuckles. Now, these turn \buckles secure your camper to the tie-downs mounted on your truck at all four corners. This system is very easy to use. It's a really nice, durable system. It features the level action handles that makes the turn buckles very easy to operate. Life up to release the tension, push back down to apply tension.


TorkLift Camper Tie-Downs TLS9520-22-LK Review

Speaker 1: Today, we're going to be taking a look at the TorkLift Locking FastGun Turnbuckles. Now, these turnbuckles secure your camper to the tie-downs mounted on your truck at all four corners. The unit's going to come with two short range turnbuckles that secure the camper to bed-mounted tie-downs, and it comes with two long range turnbuckles to secure the camper to frame-mounted tie-downs. Now, these are lever-action handles that make the turnbuckles easy to operate. All you have to do is push down on the handle. Once the hooks are in place to tighten, pop up the handle to release the tension.


TorkLift Camper Tie-Downs TLF2011 Review

Speaker 1: Today, we're going to be taking a look at the TorkLift Custom Frame-Mounted Camper Tie-Downs for the front of the vehicle. This product fits certain years of the Ford F-250, F-350, and F-450 Super Duty trucks. To ensure that this is a fit For your vehicle, you can always use the vehicle fit guide located at etrailer.com. Now, these tie-downs provide the attachment points at the front of your truck bed for securing the bed-mounted camper. Rear tie-downs are sold separately and available at etrailer.com.This is a frame-mounted design so it's going to ensure excellent handling. Securing the camper to the trucks frame instead of its bed better distributes weight to keep the setup from becoming too top-heavy.


TorkLift Camper Tie-Downs TLF3006 Review

Speaker 1: Today we're going to be taking a look at the Torque Lift custom frame mounted camper tie downs for the rear of your truck. This product fits certain years of the Ford F-250, F-350 and F-450 Super Duty trucks. To ensure or double check that this is a fit for your vehicle, you can always use the vehicle fit guide located at etrailer.com.Now these tie downs provide attachment points at the rear of your truck bed for securing a bed mounted camper. Front tie downs are sold separately and available at etrailer.com.This is a frame mounted design, which is going to ensure excellent handling so securing camper to the truck's frame instead of its bed really helps better distribute weight to keep the set up from becoming too top heavy.One of the neat things I like about this set up is when they're not being used they're virtually undetectable. These tie down inserts can easily be removed from the frame mounted receiver brackets with the included pins and clips. Just undo that and you can take it out and you're not really going to notice that anything's even installed.I do want to point out that on this arm, you're going to notice that it does feature two pinholes so you can choose whichever location works best for your application.


TorkLift Camper Tie-Downs TLR3503 Review

Speaker 1: Today we're going to be taking a look at the TorkLift custom frame mounted camper tie-downs for the rear of the vehicle. This product fits many vehicles so to ensure that this is a fit for your vehicle, you can use the vehicle fit guide located at etrailer.com. These tie-downs provide attachment points at the rear of your truck bed for securing a bed mounted camper. Front tie-downs are sold separately and available at etrailer.com. The frame mounted design ensures excellent handling, so securing the camper to the truck's frame instead of its bed better distributes weight, which keeps the setup from being too top heavy.When they are not being used, the system is virtually undetectable. All you have to do when they're not being used is you can actually remove the arms and get them out of the way.


Articles about Camper Tie-Downs



Camper Tie-Downs Questions and Answers

  • Camper Tie Down Recommendations for a Chevy Silverado 2500
  • There are several camper tie downs that you could use depending on how you want them to mount. First, the Camper Tie Downs, # TDSF, that you have referenced will fit your truck and fit in the truck stake pockets. If you do not want something in the stake pockets, then I recommend going with Camper Hold Down, # HSSF, which wrap around the bed side. For either kit, use Camper Tie Down Hardware Package, # TDHP.
    view full answer...

  • Camper Tie Downs for a 2,600-Lb Camper on a Ford F-250 Super Duty
  • The Brophy Camper Tie Downs, part # TDSF are a universal application for full-size trucks and they will fit a Ford F-250 Super Duty. The hardware to mount the tie downs to the vehicle is included. I would also recommend the Brophy Camper Tie Downs, part # HSSF which is a more heavy duty tie down. The tie downs wrap around the bed, not in the stake pockets, and are mounted inside the bed. They will not work with a slide-in bed liner. There is no weight capacity rating on the camper...
    view full answer...

  • How to Connect Camper Tie Downs to Camper
  • The HSSF hold down brackets would use the Tie Down Hardware Package, part # TDHP, which includes hooks, chain and turnbuckles. The tie down hardware would typically attach to existing eye bolts built into the underside of camper. If your camper does not have such an attachment point, you can add them, as long as they attach to the frame of the camper. The Steel flanges shown in the photo you provided could be used as attachment points for the hardware if they are connected to the camper...
    view full answer...

  • Compatibility of TorkLift Camper Tie-Downs
  • Since your F-250's hitch was installed after it left the factory it could potentially be either a factory hitch or an aftermarket hitch. There should be a safety sticker on the hitch that indicates its capacities and also its manufacturer. If there is no such sticker on your hitch, nor any identification for brand (Curt, Draw-Tite, Hidden Hitch) nor a part number, then chances are its the OEM version. If you have a non-Torklift aftermarket hitch the tie downs you can use are part # TLF2011...
    view full answer...

  • Weight Limit For Brophy Camper Hold Down # HSSF On 1995 Ford F-250 Longbed
  • After speaking to my contact at Brophy, she informed me the Brophy Camper Hold Down # HSSF technically does not have a weight range. This product is limited only by the weight capacity of your 1995 Ford F-250, so you will need to consult your vehicle owners guide to find the weight limit of your cargo bed. You will also need to ensure there is at least 2 inches of space between the truck bed interior wall and the lip of the bed in order for the hold downs to fit properly. I have included...
    view full answer...

  • Will Brophy Stake Pocket Camper Tie Downs # TDSF Fit 2008 Chevrolet Silverado Crew Cab
  • The Brophy Stake Pocket Camper Tie Downs, part # TDSF, will fit most full-size pickups with straight fenders and single-wall construction. These will install permanently in the stake tubes. Installation requires drilling to secure each tie down to the top of the bed rail (with included hardware). The Brophy # HSSF Camper Hold Down does not require drilling for installation. However, the HSSF requires a minimum of 2-inches underneath the lip of the bed rail for installation of the supporting...
    view full answer...

  • Turnbuckle Recommendation for 2017 Ford F-250 Camper Tie Downs
  • The TorkLift FastGun Turnbuckles part # TLS9526 that you referenced would be a great option. They are a frame mount option that would work well for your 2017 Ford F-250 with the # TLF2022 and # TLF3008.
    view full answer...

  • What Turnbuckles are Recommended for Torklift Frame Mount Tie-Downs on a 2010 Nissan Frontier
  • To maintain the warranty of the Torklift Custom Frame-Mounted Camper Tie-Downs, # TLN2409 and # TLR3500, for your 2010 Nissan Frontier, you will want 4 spring loaded turnbuckles like the Torklift SpringLoad XL Turnbuckles, # TLS9050A or the FastGun Turnbuckles, # TLS9526. Torklift requires spring loaded turnbuckles for frame mounted tie-downs due to the tension they provide. As you mentioned, these are sold in quantities of two so you would want two sets of the turnbuckle you choose. Torklift...
    view full answer...

  • What Size are the Inner and Outer Tubes and Wall Thickness of TorkLift Camper Tie Downs
  • The TorkLift camper tie downs you referenced, # TLF2011 and # TLF3001 will have an outer assembly and an inner assembly. Tie down # TLF3001A will too but it has aluminum components. The measurements will be the same for all of these. I pulled # TLF2011 to take the measurements. The inner tube is smaller, 1-1/2 inches square with a wall thickness of 3/16 of an inch. The part of the inner tube that you tie the camper off to is 1/4 inch thick. The outer tube is larger at 2 inches square...
    view full answer...

  • Torklift Rear Camper Tie-Downs for 2003 Ford F350
  • According to my Torklift contact, the # TLR3503 rear tire downs you mentioned are indeed the correct tie downs for your 2003 Ford F350 with 8 foot bed.
    view full answer...

  • Which Turnbuckle to use with Brophy Tie Downs HSSF
  • With the Tie Downs part # HSSF the Brophy Turnbuckles part # TDHP would be the correct turnbuckles to use as they were designed for the tie downs you mentioned.
    view full answer...

  • Difference Between The Brophy Tie Downs TDSF and HSSF For a Camper Towed By a 2000 Ford F-150
  • I contacted our representative at Brophy about the differences between the Tie Down Anchor, part # TDSF, and the Camper Tie Down, part # HSSF. Part # TDSF can be used on campers that have a total length of up to 8 feet in length. Part # HSSF can be used on any size campers. Part # TDSF mounts into the stake pocket, where as part # HSSF mounts over the sidewall of the truck bed. Also, part # HSSF is ok to use in trucks with spray-in bed liners. If your truck has a drop-in bed liner,...
    view full answer...

  • Recommended Camper Tie Downs for 1999 Toyota Tacoma
  • For your 1999 Toyota Tacoma, you will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3500 to go with the front # TLT2306. This is a confirmed fit for your vehicle as long as you don't have the factory trailer hitch receiver. You may also be interested in the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000. The spring loaded barrels minimize the stress on your tie-down points yet are sturdy to allow you to firmly tighten them down.
    view full answer...

  • Installation Instructions for the TorkLift Frame-Mounted Camper Tie-Downs # TLF2014 on a Ford Truck
  • While we do not have an install video yet for the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF2014 on a truck like your 2013 Ford F-150 we do have a nice set of full-color installation instructions for this product that I attached to the right for you to check out.
    view full answer...

  • Will the # HSSF Camper Tie Downs Fit on a 1997 Chevrolet 3500 Dually Truck and Slide in Camper
  • The Brophy Camper Hold Downs, item # HSSF, should fit on your 1997 Chevrolet 1 ton Dually. Some dually beds interfere with the installation of the hardware. They will definitely work with your 8-1/2 foot slide in camper, if there is room to install them on the bed of your truck.. The hold downs do not fit in the stake pockets, but wrap around the bed rails and are mounted inside the bed. When attached the chains are tightened and pressure is applied from the inside of the bed out and...
    view full answer...

  • Truck Bed Camper Tie Down Recommendation for a 2004 Ford F-150 with 6.5 ft Short Bed
  • The Stake Pocket Camper Tie Downs, # TDSF, would be a good choice for your 2004 F-150 with 6.5 ft. Short bed, as long as your camper is not over 8 feet long. A better option, or if your truck camper is longer than 8 feet, would be to use the over the rail Camper Hold Downs, # HSSF. I installed a set of these and took some photos showing how they mount and how the pressure is applied when attached with the Camper Tie Down Hardware, # TDHP. For the ultimate tie down performance, frame...
    view full answer...

  • Recommendation of Camper Tie Downs for a 2010 Ford F-150
  • The Brophy Camper Tie Downs, part # TDSF can be used on campers that have a total length of up to 8 feet in length. The Brophy Camper Tie Downs, part # HSSF can be used on any size campers. There is no weight capacity rating on the camper tie downs and they will work for any camper size that is properly sized for your 2010 Ford F-150. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are mounted...
    view full answer...

  • Recommend Camper Hold Downs For 2500 lb Camper
  • Both the Erickson Tie Down Anchors, part # EM01003 and the Putco Push-Up Tie-Downs, part # P99901, are not designed to be used to hold down campers. The capacity of the Erickson Tie Down Anchors, part # EM01003, is 1,000 lbs. For a camper tie downs, I would recommend using the Brophy Camper Tie Down, part # HSSF. These camper tie downs are made to be used with the bigger size campers and do not have a capacity. If you have a slide-in bedliner, you will have to trim it or remove it to...
    view full answer...

  • What are the Rating Requirements for the Brophy Stake Pocket Tie Downs TDSF
  • The Brophy tie downs part # TDSF that you referenced are rated for use with any camper that is properly sized for the truck it will be installed in. The Brophy # TDSF mounts into the truck bed stake pocket, where as the Brophy # HSSF tie downs wrap around the bed, not in the stake pockets, and are mounted inside the bed. Also, Brophy # HSSF will work in trucks with spray-in bed liners. If your truck has a drop-in bed liner, it will need to be trimmed or removed to use part # HSSF. Since...
    view full answer...

  • Availability of Camper Tie-Downs for 2011 GMC Sierra Full-Size Pickup
  • The particular Brophy Camper Tie Downs you referenced, part # TDSF, are not a fit for your 2011 Sierra, but there are other options available for your truck. The particular camper tie-down that is appropriate for your Sierra will depend on its exact configuration. I have provided a link to our main page for these products and at the top of the page you can use the drop-down menu to select the particular combination of features on your Sierra. Series, bed length and cab style all affect...
    view full answer...




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.