What our customers are saying:
The phone operator was very helpful and made my purchase easy. I will keep this website handy.
Harold
Gillsville, GA
Videos
for RV Power Inlets
Help Articles
Expert Answers
Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…
Yes, for the white version of the MaxxFan Deluxe Roof Vent with 12 volt fan, thermostat, remote and powered lift we have the part #MA00-07000K which is exactly what you need.
Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…
In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along…
We have the Multi-Purpose Access Door for RVs, #37231025. This is a 6-3/4" diameter hatch that requires a 5-1/2" diameter cutout. This threaded design easily twists off to provide…
The USB Outlet with Waterproof Cap #DG61USBVP requires a 1-1/8" depth without the cap. The cap for the face has a ring that slides onto the shaft and is approximately 5/16" thick. If…
What you sent in is a picture of a standard 50 amp socket seen on RVs. So for an exact replacement you'd want the part #A10-50INVP.
The "20327-02" light base is a rectangular shaped clearance light measuring 4" long x 2" wide which was made by…
Your power cord, just like with the Mighty Cord #A10-5025END will wire the black and red wires as your positive, white as your neutral, and green as your ground. The green wire should not be sticking out of the sleeve like you have pictured and the…
The SmartPlug RV TV/Internet Inlet #SM28VR is the closest option we offer to the BDCOAXECPB. This comes with a coaxial connector and blank port for you to install an ethernet port from your local electronics/electrical supply store into.
Short answer, yes you can convert from 30amp to 50 amp. It will be costly and require an electrician. Long answer, you will need to replace the power outlet with SmartPlug RV and Marine Power Inlet - 50 Amp - Stainless Steel #SM79FR. Then replace…
The AC distribution panel of the Progressive Dynamics 4100 Series RV Converter w/ Charge Wizard and AC/DC Distribution Panel #PD4135K is being grounded at the shore power connection point so you wouldn't need to ground…
