RV Antenna and Radio

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

Hi Rick, LaSalle Bristol's roof membrane is made of PVC which is known to be durable and offer better protection against punctures and overall weathering. Alpha Systems offers TPO roof membranes that are more environmentally friendly/recyclable…

Hey Kyle, The etrailer Solar Charging System with Digital Solar Controller #e59FV is going to include the solar panels, mounting brakcets/hardware, wiring to run from the panels to the controller and from the controller to the battery, and a solar…

You're already on the right track with everything you looked at. Your 2018 Thor ACE 30.3 has a GVWR of 18,000 lbs so I recommend the following: -Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR…

You are correct that the AM/FM signal input is at the rear of the Drive RV Stereo DVD1000. To gain access to the rear on your stereo that's already mounted you will need to first remove the bottom panel from the front face. I have highlighted…

Hello Michael, thanks for reaching out. The Roadmaster Dual Hitch Receiver Adapters #RM23SR and #RM-077-10 both have 10" between both receivers and they are both rated or 10,000 lbs. The only noteworthy difference is the placement of the…

Yes, the RoadMaster Second Vehicle Kit #RM-98800 will work just fine with your Add a Brake system. This kit includes a breakaway system.

Based on your description it sounds like you have the Replacement New-Style Linc Analog Remote - 5 Function #LC292614. In order to sync this remote you need to start by pressing and holding the momentary push button on the receiver. Next, press the…

Welcome back! We do not sell the breakers you'll need for the Progressive Dynamics 4100 Series RV Converter item #PD4135K you purchased but I have listed below the ones Progressive Dynamics recommends. You can source them at your local hardware…

What year is your E450 RV? If it is 2008-2021, you can use Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65053. That said, if you have a newer model, we do have a customer that verified fitment on a 2023 E450 as seen in the…

Sorry Frank, I'm a little confused and think you may have put in the wrong number as I do not see anything coming up as a Demco 6170. If you are referring to the Head and Base Assembly #DM6107 then yes you will be able to install this into your…

Hey Stephen, for your AL KO 3,500 lb axles on your Flagstaff you would want the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased #AKHD-545-35-K. For brakes, I recommend the Electric Trailer Brake Kit -…