Vehicle Snow Plows

Hi Winston; there are two options to mount a snow plow on your 2010 Ford F-150 FX4. If you want to use the Detail K2 Summit II Snowplow #K2SUMM8826 you looked at you will need the Custom Mounting Brackets for Detail K2 Snowplows #K281521. The…

Hey Bruce! The support bar mounting issue you pointed out is why I am going to steer you away from using the Curt Front Hitch item #31302 to attach a snow plow on your 2006 Yukon. Those support bars on the SnowBear Snowplow item #K2AVAL8219…

Good question! The blade stiffeners that come with the Detail K2 Snowplow #K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you…

Hey John, thanks for reaching out! It all depends on what snowplow you go with. For example, the Agri-Cover SnowSport LT #SS98GV requires 8" - 14" of clearance under the receiver, while the Detail K2 Snowplow #K2AVAL8826 requires a hitch…

Hello Rickey. The Curt Class 2 Hitch #C12181 is currently the only custom fit aftermarket hitch available for the 1991 Mitsubishi Montero and it uses a 1-1/4" receiver. The only way to add a 2" receiver to this vehicle would be to use a…

For your 2006 Honda Ridgeline, the K2 Avalanche plow is only a fit for the front mounted receiver. The custom mount brackets #K286110 are not a direct fit for your Avalanche plow but the mount does come with a crossbar and I've attached the photo…

If you have a front hitch installed ono your 2018 Chevy Silverado 3500 then you would not need anything else to use the Detail K-Summit Plow part #K2SUMM8826ELT that you referenced. If you do not have a front hitch we have the Curt part #C31071 that…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

To install the Curt Hitch part #C31068 on your 2014 Ford F-150 with Ecoboost you will need to remove the air dam and then trim a small section of the lower fascia. See photo.

That's a really valid concern about the install of the Draw Tite hitch #65079 on your 2021 Jeep Wrangler 4xe Rubicon. I personally am not a fan of snow plows that attach to front hitches as from experience here at etrailer they just aren't…

The Detail K2 Snowplow for 2" Hitches #K2AVAL8219 does not include the Curt Front Mount Trailer Hitch Receiver #31241 that is needed for your 2020 Nissan Frontier. The plow will come with all the wiring needed for the winch on the plow. I…

K2 recommends that their #K281488LB2 Halogen High/Low Beam Light Kit with Turn Signals be used with their #K2AVAL8422 Avalanche snowplow. The kit includes the wiring harness, brackets and all necessary installation hardware. I've linked to a…