Availability of 2" Ball for Curt TruTrack 2P Weight Distribution System

Question

Question:

I would like to know if the Curt 17599 can be shipped with a 2 inch ball or buy separately.Ram 1500 classic

asked by: Delbert N

0

Expert Reply:

Hey Delbert, welcome back! The Curt TruTrack 2P Weight Distribution System # C95MJ is only available with the 2-5/16" ball. You will need to pick up the Curt 2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank # A-90 and swap it out yourself if you want to use it with your 2" coupler.

What kind of trailer are you towing?

expert reply by: Robin H

0

Curt TruTrack 2P
(click to enlarge)

Delbert N.

2/11/2026

We tow small travel trailer gvwr just over 4000 lbs.hitch weight 400 lbs .just looking for better trailer control and stability.

Robin H.

2/12/2026

@DelbertN is that 400 lbs loaded? If it is, this WDH is going to be overrated for your setup.

Delbert N.

2/12/2026

Do you have a WDH that you wood recommend?

Robin H.

2/12/2026

@DelbertN was that the dry/unloaded tongue weight or what you measured with the trailer loaded? The WDH should match with the tongue weight. If 400 lbs is your max the # FA92-00-0450 is a better choice.

Answer 1

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 2

To install the 2-5/16" hitch ball on the Curt TruTrack item #C69JR you will need a 1-7/8" Socket like item #ALL643216.

view full answer...

Answer 3

Most of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part #19286, will use a 1-7/8 inch socket. A…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 7

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 8

Hi Joe, I am happy to help you find the pins you are looking for. it sounds like you’re looking for the pin that secures your Blue Ox Alpha tow bar to the hitch, for that you can use a standard 5/8 inch hitch pin like part #ML1465DAT which will work…

view full answer...

Answer 9

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 10

Hey Charles! The Curt TruTrack 2P Trunnion Weight Distribution System w/ Sway Control - 7-Hole Shank - 12K GTW #C75RJ will work great with your 2026 F-250 to pull a 25-30 ft RV. There isn't a kit with a 2.5" shank, but you can add Curt…

view full answer...

Answer 11

Hey John, thanks for the picture that looks like it came from the instructions and your thermostat. You do need to move the first and last dipswitches up and that will allow both the furnace and the heat pump to function.

view full answer...

Answer 12

Hi Mike; we don't have a way to swap out the 2" ball on the Andersen Weight Distribution Hitch #AN88VR. We do have the 2-5/16" ball separately, #AN45VR, but we don't have it as a complete system. If you really want the Andersen,…

view full answer...

Availability of 2" Ball for Curt TruTrack 2P Weight Distribution System

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching