Looking For Rear Step Bumper For 1969 Chevy C10

Question

Question:

looking for rear step bumper for 1969 Chevy C10 side step. What options do you have?

asked by: Michael C

0

Expert Reply:

Hello Michael, thanks for reaching out. We do offer bumpers for the 1969 Chevy C10. For example the Westin Fey Diamondstep Rear Bumper with Custom Installation Kit # 21000-92500 will fit the 1969 C10 but this excludes the stepside/flareside bed models so if that is what you have, the bumper will not fit. Sadly, we do not offer anything for the stepside models at this time.

expert reply by: Jesse M

0

Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Silver Powder Coated Steel
(click to enlarge)

Mike

5/28/2025

Sorry to read that but thanks for your reply

Answer 1

The Westin Fey Diamondstep Rear Bumper #20008 is approximately 72-3/8" in length and the Westin Fey Diamondstep Rear Bumper #21000 is approximately 74-5/8" in length.

view full answer...

Answer 2

The Westin Fey Diamondstep Rear Bumper with Custom Installation Kit - Chrome Plated Steel, part #21000-92230, is the longest step bumper we offer. It measures 74.5". This bumper fits Ford F series pickups from F-150 up to F-350 from years 1967 -…

view full answer...

Answer 3

The correct part number to install the Westin Fey DiamondStep rear bumer #21000 on your 1992 Ford F-150 is the part #21000-92230 which includes the install hardware for your truck. The part number you referenced would not work.

view full answer...

Answer 4

The Dexter Dual Trailer Wheel Lug Nut with Swivel-Flange part #6-118 will require a 32mm socket which is roughly the same size as a 1-1/4 socket.

view full answer...

Answer 5

Hi Jason, Sure thing we can get your 1980 Chevy pickup set up with 7-way and 4-way in the back as well as a 7-way for your truck bed. For the rear you will need the T-Connector Vehicle Wiring Harness #C55311 along with the Universal Installation Kit…

view full answer...

Answer 6

To install the Westin Fey Diamondstep Rear Bumper #21000 on your 1971 Chevrolet C10 pickup you will need the Custom Installation Kit #92500. We do sell this as a Kit #21000-92500 if you need both the bumper and brackets.

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Looking For Rear Step Bumper For 1969 Chevy C10

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching