Product Experts Available Now!
Call 1-800-940-8924
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
(220 reviews)
Price: $882.88
In Stock
Stromberg Carlson
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs
Part Number: LG-1
In Stock
$882.88
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (220)
- Q & A (0)
- Photos
Stromberg Carlson Camper Jacks - LG-1
Highlights
- Raises and Levels Heavy Trailers: 5,500 lb combined capacity steadies and supports large loads.
- Fast, Simple Operation: Electric motor lifts with an IP-rated switch that won’t spark or trip circuits.
- Saves Time Leveling: Drop legs with 15" of extra lift reach uneven ground quickly to reduce setup time.
- Reliable Manual Backup: Includes hand crank so you can still raise or lower if power isn’t available.
- Built to Last Outdoors: Heavy-duty steel legs with corrosion-resistant aluminum gearbox housing.
- Fits Common Mounting Spacing: Weld stops measure 15-1/2" inner and 17-1/2" outer edge to edge.
Features to know about
Raises and Levels Without the Effort: Electric Power That Handles Heavy Loads
Getting your trailer level and steady doesn’t have to mean cranking by hand. This electric landing gear set uses a single-speed motor with an IP-rated switch for safe, reliable power. It delivers a total lift of 34-7/8", including 19-7/8" of travel and a 15" drop leg, with a combined weight capacity of 5,500 lbs. Just push the switch and let the motor do the heavy lifting while you steady your setup.
Saves Time on Setup: Drop Legs with Quick Pin Adjustment
When you’re parked on uneven ground or want to level fast, the built-in drop legs let the jacks reach the ground quickly. Each leg adjusts in 1" increments, so you can fine-tune the height without wasting time cranking. The included cage pins make it easy to release the drop legs, and you can upgrade to spring-loaded pull pins for one-handed use if you want even faster setup.
Built Strong for Real Use: Heavy-Duty Steel Construction with Aluminum Gearbox
These jacks are built to stay solid under load. The legs are made from heavy-duty steel that welds directly to your trailer frame, and the gearbox is protected inside a corrosion-resistant aluminum housing. It’s a tough combination that keeps your landing gear working smoothly season after season without binding or bending under pressure.
Keeps You Moving When Power Fails: Manual Crank Backup Included
Even though it’s powered, you’re not stuck if you lose battery power. A hand crank is included so you can still raise or lower your trailer manually when needed. It’s a simple backup that gives peace of mind wherever you park.
Fits Common Setups Easily: Compatible Dimensions Across Major Brands
The landing gear measures 29-1/2" in leg length with standard weld stop spacing—15-1/2" inner edge to inner edge or 17-1/2" outer edge to outer edge—and a cross shaft length that adjusts from 41" to 71". These standard dimensions make it compatible with most existing fifth-wheel landing gear systems from other major brands, letting you install it without starting over on your frame hardware.
Specs
HIGHLIGHTS
- Durable construction: Heavy-duty steel build ensures long-lasting performance and stability.
- Easy operation: Electric motor system allows quick and smooth raising or lowering of your trailer.
- Adjustable design: Drop leg and adjustable cross shaft provide a perfect fit for various trailer configurations.
- Corrosion resistance: Powder-coated finish protects against rust and weather damage.
- Includes footplates: Wide base plates enhance stability and distribute weight evenly on soft ground.
Dimensions
- Leg length: 29-1/2"
- Total lift: 34-7/8"
- Travel: 19-7/8"
- Drop leg: 15"
- Distance between weld stops (Inner edge to inner edge): 15-1/2"
- Distance between weld stops (Outer edge to outer edge): 17-1/2"
- Cross shaft length: 41" - 71"
- Footplate dimensions: 8" long x 5" wide x 2" tall
- Outer tube width: 2-1/2"
- Distance between weld stops: Inner edge to inner edge: 15-1/2" Outer edge to outer edge: 17-1/2"
Weight and Capacity
- Combined weight capacity: 5,500 lbs
Warranty
- Warranty: 1-Year warranty
Note
Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
LG-1 Stromberg Carlson Deluxe Electric Landing Gear for Fifth Wheel
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Defective
Ratings & Reviews
4.6
220 reviews
by:
Marly O.
05/16/2020
Before I purchased my Stromberg Carlson Camper Jacks I messaged your company to request information on my project and how I was going to use the jack system. Unfortunately I received no response from your company but purchased the jacks anyway and installed them on my project to complete it.
by:
Lance
05/03/2018
Great!!!’
Landing gear Installation went very smooth!
etrailer customer service... is~2nd to none!
Landing gear Installation went very smooth!
etrailer customer service... is~2nd to none!
by:
Anthony
08/05/2025
Package arrived missing parts. No response from etrailer on missing parts. Paid almost [XX] dollars and this is the customer service I receive. Will not be purchasing from this company in the future.
by:
Jim C in Orange County
04/30/2017
LG-1 (5500 lb capacity 5th wheel landing gear) came in a previously opened box. Parts clanking around loosely inside. None appeared damaged but the lead leg LG-179013 did not operate smoothly. The follower leg, LG-179014, was good. I called etrailer about both issues, open box and bad lead leg. They shipped a replacement leg from their stock a few days later. It arrived in good packaging and worked smoothly. They sent a prepaid shipping label to return defective part. The legs were easy to install. I actually wanted to buy the Stromberg Carlson LG-5 Landing Gear Dual Power Conversion Kit but etrailer did not sell that model. I chose to by the full leg kit and use only the powered leg to convert my 5th wheel to dual power landing gear. It works great. I am disappointed that I received an open box with a bad part but etrailer responded nicely and quickly. That will keep me coming back.
by:
Jim C.
04/11/2014
I found the product was of good to excellent quality.
However when reviewing the installation directions it had no directions on how to wire the elec. motor to the control switch. I found the wiring instructions on the motor manufacturing web site. I would recommend that these instructions be with the installation instructions.
Also when connecting the left & right landing gear together with the provided 1" square tube the bars were not long enough to make the span on a standard 5th wheel camper. I had to use my existing bar.
I would use etrailer.com again and I hope this helps them make corrections to this package.
However when reviewing the installation directions it had no directions on how to wire the elec. motor to the control switch. I found the wiring instructions on the motor manufacturing web site. I would recommend that these instructions be with the installation instructions.
Also when connecting the left & right landing gear together with the provided 1" square tube the bars were not long enough to make the span on a standard 5th wheel camper. I had to use my existing bar.
I would use etrailer.com again and I hope this helps them make corrections to this package.
Jim C.
4/11/2015
The jack ia awesome. I hope my suggestion were helpful in making the product better!
by:
Steve Ward
09/26/2020
These jacks were a direct bolt-on replacement for the Atwood jacks on my fifth wheel. One year later, they are working fine. When considering this purchase, it was not clear if the landing gear would fit or if welding would be necessary. I called Stromberg-Carlson and they sent the technical drawings right away. Answered the question immediately. I will never forget their fine customer service.
Jon G.
10/13/2020
We are working on getting the product page updated to make it easier to determine fitment. Here is a link to one of our answer pages that can help out in the meantime!
Helpful Links
Steve W.
9/27/2021
Still working fine. I am very pleased with this product
by:
James
08/10/2023
A perfect replacement for my old landing gear. Very few adjustments needed to make the legs fit perfect with my existing brackets and a little drilling for the bolt holes. Now at least I know I'll be able to unhook from my truck.
James
8/11/2024
Works like a new camper. Lifts with ease.
by:
Ken M
09/18/2014
First of all I want to say that any of the following comments by me is NOT a reflection on etrailer.com whose support and product shipping has been excellent. It is more as a informational thing than anything. I installed this unit on my 2007 28' Thor Transport toy hauler after it fell off the jacks and destroyed the landing gear (that just made me so happy, you just don't know the joy..). My first comments are for Thor, I want to thank them for the absolute cluster (you know what) of an install of the original gear. Totally inaccessible and the worst engineered and assembled garbage ever. The original gear was tack welded at the stops and the carriage bolts for the mounting brackets were installed so that you could not remove them, they all needed to be cut off, a real dream job in an inaccessible location. In addition, I had to remove the 5500 onan generator and the (2) 7.5 gallon propane tanks and the sheet metal enclosures and doors. Next I would like to thank Lippert and Stromberg Carlson for continuing their questionable design of these legs which are only supported by one tab (on the legs) and one bracket on each leg in the load bearing direction (the other tab supports the leg when in the non-load bearing position. And for the 2 extra bolts (1/4-20 x 1 1/2" with jam nuts) that no one seems to know where they go. Also, there is a lot to be desired with the instructions, but that's just me I guess. Be sure to accurately measure your existing brackets prior to getting started because this could be a game changer if they are off by more than a 1/4" or more, you would have to have your brackets cut off and re-welded. As for my Thor, they were off by about 1/8" and I was able to grind off the bottom of the lower tab (on the leg) to make them fit into my existing brackets. After completing the job (3 days in 105 degrees) I still have some questions about the carriage bolts that were shipped, if I were to do it again I would change the bolts to a much stronger bolt, but it's to late for me now. Etrailer had the best price and fastest shipping and were very helpful, would I buy again from them, you bet...
by:
Gary C
08/07/2017
Thank you Shery and etrailer for reordering, at the same price, the LG-1 so it would arrive on time.
It works great on my 2004 Montana. I did have a problem with lining up the the legs to the already welded on brackets, but with a minamum amount of ajustment (some filing of bolt holes and hammering on leg) I was able to secure solidly. My decision to replace the entire landing gear assembly in stead of just the broken lead leg was based on the age of my RV and the cost to do so (it was a great price). I will continue to use your service in the future and reccomend it to anyone I can.
Thanks again for the great service.
It works great on my 2004 Montana. I did have a problem with lining up the the legs to the already welded on brackets, but with a minamum amount of ajustment (some filing of bolt holes and hammering on leg) I was able to secure solidly. My decision to replace the entire landing gear assembly in stead of just the broken lead leg was based on the age of my RV and the cost to do so (it was a great price). I will continue to use your service in the future and reccomend it to anyone I can.
Thanks again for the great service.
by:
Terry
03/30/2022
After talking to the experts at etrailer they helped me find a complete landing gear set (2 landing legs, feet, motor, gear box, switch, connecting arm, crank) to replace my original 2005 Jayco 5th wheel that I could not get OEM replacements or parts for. we settled on the LG-1. it was almost o perfect fit. I have never replaced landing gear before. I was one of the easiest projects I have done in a long time. The only modifications I had to do was cut a gap for the new gear connecting rod and manual jack crank arm to go through. It took about 5 minutes for both. The whole project took about 1.5 hours. Everything works perfectly.
by:
David
06/23/2022
In June 2022 while stranded at a campground in the finger lake region of NY, etrailer sourced and delivered a Stromberg Carlson landing gear kit that matched up perfectly with my 11 year old Crossroads Cruiser fifth wheel. The kit included all parts needed (electric motor, gearbox, jackshafts, landing pads, new switch, bolts, nuts, etc.) to replace old landing gear components and get my fifth wheel operational. I replaced everything at my campsite. Parts arrived in 3 days, matched perfectly, and were of excellent quality. Direct contact with James R. of etrailer guaranteed the correct kit for my fifth wheel. Terrific service, reasonable prices, and convenient delivery options continue to be a hallmark of etrailer. They are definitely my go to source for all things RV. Thanks for being there and your expertise with RVs and trailers!
by:
Andy
07/05/2025
Everything was great. Quick delivery and the gear matched up perfectly. Great customer service. Thank you.
by:
K.C.
07/24/2019
This product was as described and had fast shipping as always when dealing with etrailer. It has been 1 year since we ordered this and the Jack works great. I would recommend etrailer to anyone needing anything that this company sells. They have wonderful customer service and make sure you are 100% satisfied with any item.
by:
Roger
09/30/2018
This was purchased as a compromise. An exact fit was impossible to find since Lippert discontinued Atwood landing gears. A set including motor was ordered since it could not be determined if the old motor would fit the new legs.
As it turns out the old motor fits and works far better than the new one. The legs are not really long enough but can be used if not fully retracted. Not completely satisfactory but we are working around the problems.
Cathy T. was very helpful. I just wish she had a more appropriate set.
As it turns out the old motor fits and works far better than the new one. The legs are not really long enough but can be used if not fully retracted. Not completely satisfactory but we are working around the problems.
Cathy T. was very helpful. I just wish she had a more appropriate set.
by:
Keith
10/01/2021
Perfect replacement for my OEM Landing Gear. eTrailer Saved my RV Trip! Fast Shipping unbelievable service to ensure I had the correct gear for my RV. In addition, eTrailer had the best value for my money.
by:
Robert B.
07/17/2017
Installed in about an hour. Fairly simple to do. Looks like it will work just fine. Motor to drive it sounds like it may be a little weak for my application on a 30' fifth wheel though. Other than that satisfied.
Robert B.
7/17/2018
Working just fine still. Will outlast the trailer Im sure probably! Thanks for the great customer service and checking back dont get that from any other dealer around here!
by:
Rick
08/14/2023
I thought replacing the landing gear would be much harder on my 5th wheel but they when in without a problem and are still working great. The video walks you through the installation step by step. Rick
by:
Eliborio E.
09/30/2016
Thank you for you super fast service, because of that i can safely unhook my 5th wheel this coming deer hunting season. I was going to just level it best i could out there and leave it hooked up. Everything was as described on your online ad, am very happy, everything went on perfect. Had to put the cranking mechanism on sideways so manual crank would fit crank hole. Wish there was a better way to secure cranking mechanism to prevent it from wobbling when cranking.
by:
Dennis S
02/25/2017
Arrived a day or two earlier than expected. Almost identical to original equipment I had on my keystone Laredo 2009. Old gear was very easy to remove. New gear installed easily. Took about two hours with just socket wrenches and basic hand tools. Installed it at a campground.
The only reason I didn't give a five star review is that the kit didn't include new feet as advertised...I just used the old ones. I think this gear is just fine, so long as you get in the habit of chocking the wheels when connecting or disconnecting. Pushing or pulling the trailer with the feet on the ground bends the legs and then the motor overloads.
The only reason I didn't give a five star review is that the kit didn't include new feet as advertised...I just used the old ones. I think this gear is just fine, so long as you get in the habit of chocking the wheels when connecting or disconnecting. Pushing or pulling the trailer with the feet on the ground bends the legs and then the motor overloads.
by:
Gordy
05/31/2015
Product was better quality than the original landing gear and fit perfectly on my 07 Keystone Cougar. Great Price! The dealer wanted $450 for just the follow leg and gear box plus 3 hours labor and I would have to wait 5 weeks. I ordered the complete system including motor for about $425 with shipping, had it in 2 days then I installed it in 2 hours.
by:
Carroll, Springdale, AR
08/24/2016
so far working great, perfect fit and easy to install with a little help. the only problem I have had is that the bolt on the tail end broke and had to replace it, but its possible that it worked loose causing it o break
Carroll, A.
8/28/2017
Still working, the only thing is that it is really slow going up and down.
by:
Alan
11/05/2018
The folks at etrailer were great to work with an the product was exactly what I needed to get me up and running again.
I had the pleasure of emailing Jameson when I first started to find the product that would suit my needs. Jameson was prompt with his replies was spot on to the product that I needed to order to complete my project.
When I received the product is was exactly as advertised. It was easy to install and all the parts were there that were needed to complete the job.
Great Job etrailer team!!
Thanks,
Alan
I had the pleasure of emailing Jameson when I first started to find the product that would suit my needs. Jameson was prompt with his replies was spot on to the product that I needed to order to complete my project.
When I received the product is was exactly as advertised. It was easy to install and all the parts were there that were needed to complete the job.
Great Job etrailer team!!
Thanks,
Alan
by:
Robert T
07/07/2016
Was very impressed with the speed my order was processed and its delivery to my door. Do not have the landing gear installed yet, but it appears to be exactly the right replacement parts. Also the price was the best I found anywhere. Will certainly be the first place I check for future parts. Thankyou very much for the excellent service!!!!
by:
Lynn Y.
03/24/2017
Received jacks in a timely manner. I haven't installed yet. These new jacks are replacing the old Atwood landing jacks on my 1993 Alpenlite 5th wheel trailer.
by:
Christopher
04/14/2024
Product was an exact fit for my application only problem I had was key inside gear box fell out but easily fixed once I figured it out.etrailer was spot on helping me find correct jack for my ca.per works great
25
220
true
Show More Reviews
See what our Experts say about this Stromberg Carlson Camper Jacks
- Replacement Venture Landing Gear Box for VMC940RBFor your Venture landing gear you can use # LC276602 or # LG-179015. Either one will work.
view full answer... - Landing Gear Replacement Recommendation for 1997 Fleetwood 5th Wheel w/ RBW Landing GearSince your landing gear is made by RBW none of the setups we offer are going to allow you to reuse your motor. The dimension of 15-1/2 inches between the brackets on your landing gear means nearly every landing gear set is going to fit your trailer as that is the standard dimension. For a powered Lippert landing gear that would bolt right up we have the part # LG-1 or for the manual crank we have the part # LG-183708.
view full answer...
- Replacement Landing Gear for Atwood Set that is on 1998 JaycoHey Brian, I would recommend just starting totally over with a new landing gear set like the Stromberg Carlson part # LG-1. At one point there was some confusion on whether or not the Atwood landing gear components were interchangeable with the other brands like Lippert, LCI, Venture, Stromberg etc. so while your old motor MIGHT work there's a big enough risk it wouldn't that I wouldn't go that route. This also gives you all new components so wouldn't have to worry about having to replace...
view full answer... - Replacement Landing Gear for 2008 Jayco Eagle Fifth Wheel with Atwood LegsSince Atwood is no longer around and we can't get their replacement lead and follow jacks your best option will be to replace the entire landing gear set like with the similar # LG-1 for a powered set or part # LG-183708 for a manual set. These kits will install with the same brackets as what your trailer has currently so it will be an easy install.
view full answer... - Stromberg Carlson Landing Recommendation to Replace Damaged RBW Landing GearOur understanding here is that AL-KO manufactured the RBW jacks and that they stopped offering replacement parts for their landing gear. It looks like your best option would be to replace your current landing gear with the Stromberg Carlson Electric Landing Gear # LG-1 that you referenced.
view full answer... - Replacement Landing Gear for 2016 Starcraft Fifth Wheel with Atwood SetI really wish we had parts for the Atwood landing gear sets still but we no longer carry them since the company is is out of business.
view full answer... - Troubleshooting 5th Wheel Landing Gear That Retracts But Wont ExtendIt could be some internal parts but it could also be the electrical system itself. The easiest way to know if the internal parts are the issue or not is to use the manual override to see if it will extend and retract without any electricity. If it does then you'll want to check your electrical connections but if it doesn't then it's something internal and you'll need to take the jack apart to see what needs to be replaced. Should you decide to replace your landing gear I recommend checking...
view full answer...
- What is the Distance Between Weld Stops on Stromberg-Carlson Landing Gear Set LG-1The weld stops on the legs of Stromberg-Carlson landing gear set # LG-1 are indeed 17-1/2 inches measured from the top of the top one to the bottom of the bottom one. If you look at the diagram I have included you will see that they have measured from the top of one to the top of the other and that is 16-1/2 inches. Since the weld stops are 1 inch tall the measurement is 17-1/2 inches just like what you need!
view full answer...
- Availability of Replacement Lead Jack and Parts for Stromberg Carlson 5th Wheel Landing Gear # LG-1The jack with the motor is referred to as the lead jack, while the other jack is called the follower. Since the jack on the motor side is in need of replacement, you would need the lead jack. The lead jack is not terribly difficult to replace. You would need to disconnect the drive rod that connects the two legs, remove the lead jack, install the replacement lead jack, and pull the motor and gearbox off the defective jack and install on the replacement. If you were using the Stromberg...
view full answer... - Replacement Drop Leg for 2017 Heartland 328RE SundanceIn order to get the correct replacement drop leg you will need to know the manufacturer and model of your current landing gear because they do need to match in order to keep your Heartland Sundance level. For example, the Replacement Lead Jack w/ Drop Leg # LG-179013 is designed for use with Stromberg Carlson models # LG-1, # LG-3, and # LG-183708. I've added a link to our page with out selection of landing gear for you to take a look at.
view full answer... - Replacement Crank Handle Connection for Landing Gear on 2005 Fleetwood ProwlerThanks for reaching out, Gary! What landing gear set do you have? For something like the Stromberg Carlson Electric Landing Gear Set # LG-1 you were looking at, you'd need the Aluminum Gearbox # LG-179015 as that's what the Crank Handle # LG-119226 connects to, but it sounds like you may have a different setup. Let me know and I'll be happy to see if we have a way to help you out!
view full answer... - Are Replacement Bevel Gear Parts Available For Older 90's Atwood Landing Gear Jack On RV?Good morning Kent. Your best bet is to replace the whole landing gear setup at this point, because Atwood hasn't made landing gear in quite some time and therefore parts are really hard to find. We don't have any bevel gears confirmed to fit, so we'd be guessing on those gear parts at this point unfortunately. The only thing we have confirmed to fit the Atwood landing gear setups is the gearbox itself which is part # LG-179015. I recommend going with a new setup. If you can get me some...
view full answer... - Solution for Needing Replacement Motor for Atwood Landing GearAt one point people were recommending Lippert and LCI brand motors to replace the Atwood motors but since then we've learned they are different. Atwood basically got out of the jack business so we don't have a replacement motor we can recommend. This would be time for a new setup altogether like the part # LG-1.
view full answer... - Info Needed to Replace Landing Gear of Older CamperSo there isn't a way to look up replacement landing gear by the VIN of the trailer or by the year/make/model. Best option would be to find a brand or part number if you can on them and we can go from there to see if there's a set that will bolt right up. Worst case scenario you could have a new set of brackets welded and you'd could install a set like the part # LG-1.
view full answer... - Replacement Landing Gear and Equalizers for a 2008 Keystone Cougar 5th WheelThanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item # LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure will be the distance of the black outer tube of the jack and the distance between the frame clamps (this measurement can differ depending on where the weld stops are located). You'lll need to measure from the underside of top bracket to top of...
view full answer...
- Recommended Replacement For Atwood MPD 71125 Landing GearThe best option to replace your Atwood MPD 71125 landing gear is from Stromberg Carlson, which is going to fit in your current mounting brackets, so all you have to do is choose the weight capacity that is right for your trailer, either 5,500 or 6,500 lbs: - 5,500 lbs: Stromberg Carlson Electric Landing Gear Set # LG-1 - 6,500 lbs: Stromberg Carlson Electric Landing Gear Set # LG-4 These landing gear sets come with everything you need for a total replacement, including the hand crank,...
view full answer... - Solution for Von Weise Fifth Wheel Landing Gear with Bad MotorWe don't carry the Von Weise brand so we can't get the replacement motors like you mentioned. Best option we would be a new setup altogether with a motor like the # LG-1.
view full answer... - Troubleshooting Landing Gear Issue On 2008 Weekend Warrior LED 3505It does sound like you have isolated the issue indirectly. If you can move everything manually without issue, then the screws in the legs are fine. The gearbox works fine under manual load, so gears are fine, and motor seems to work fine, so the issue most likely isn't your landing gear. The issue could be a weak battery. I recommend testing your battery to make sure it is charged. The 3:1 ratio is standard on landing gear but you can upgrade the motor speed for faster lift using...
view full answer... - Replacement Landing Gear for 2007 CougarFrom what you have described it sounds as if the landing gear needs to be replaced. For your 2007 Keystone Cougar, I recommend the Stromberg Carlson kit, # LG-1 which matches exactly what you have and includes the motor too. Or, for a non-powered kit that will cost a bit less, # LG-183708 but this requires you to hand crank it.
view full answer... - Recommended Replacements For VMC9000L 5th Wheel Landing Gear On A 2007 Fleetwood Prowler 285The VMC900L number you found is a determining number and we definitely have a replacement kit for you. And actually two different options. I will say that the measurements you got are a little different than what we have available though, so the mounting straps may need to be relocated to get replacements. I included a diagram of how these will measure for you to check out, but the 29-1/2" overall height matches perfectly. With that said, if you wanted to replace the whole system, the...
view full answer...
- Is the Stromberg Carlson # LG-179013 the Same as the Lippert Universal Fit Lead Jack # 179013I spoke with my contact at Stromberg Carlson and the Replacement Lead Jack with Drop Leg, # LG-179013, is the same part as the Lippert Universal Fit Lead Landing Gear, # 179013. The only difference between the two products is that they are sold through different companies so the part numbers are slightly altered. If you were interested in a replacement follow jack with drop leg you can took at part # LG-179014 or the entire assembly is available with part # LG-1.
view full answer... - Replacement Landing Gear for 2009 Keystone Cougar 5th Wheel The Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs # LG-1 is a complete landing gear and motor set that's a popular replacement we've seen used on many Keystone Cougar 5th wheel trailers, but you'll still want to confirm a few measurements. The two things you will want to measure will be the distance of the black outer tube of the jack and the distance between the frame clamps (this measurement can differ depending on where the weld stops are located)....
view full answer... - Determining The Correct Replacement Landing Gear For A 2006 Rage'n 5th Wheel Toy Hauler To determine the correct replacement landing gear for your 2006 Rage'n 5th Wheel Toy Hauler you'll want to measure the distance between the inside and outside of your current landing gear's weld stops. The brackets that hold the landing gears get welded to the frame of the trailer so if you can find a matching set you can easily swap them out without having to cut off and weld on new brackets. The Stromberg Carlson Electric Landing Gear Set # LG-1 have an inner edge to inner edge measurement...
view full answer...
- Where to Measure To Determine if Lippert Landing Gear Jack part # LG-1 Fits TrailerThe overall dimension you are measuring is the length of the outer tube of the jack. If you check out the first picture I attached you'll see where the part # LG-1 measures 29-1/2 inches in length. The second picture I attached shows the dimensions that are relevant for mounting the jack to your trailer.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Michael B
Updated by:
Manda E
Installed by:
Cole B
Installed by:
Randy B
Video by:
Zach D
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim
4/30/2018
A year later I am pleased with etrailer-Stromberg Carlson landing gear. Having two motors, one on each leg, has made hooking and unhooking a breeze. The motor that came with the kit is loud compared to the factory Keystone Cougar motor but it still works great.