See what our Experts say about this Lippert Accessories and Parts

• Replacement Atwood 75722 Motor for Atwood Camper Jack
  We have found that the Replacement Motor # LG-142178 that you referenced is indeed compatible as a replacement for your existing Atwood 75722 motor.The only thing I recommend doing is verifying that the legs on your motor aren't flush with the housing and that they are spaced apart by 4-1/8 inches, on center. This will work just fine with the remote control. If you happen to also need a replacement gearbox the Lippert # LC276602 will work perfectly.
  view full answer...
• Replacement Venture Landing Gear Box for VMC940RB
  For your Venture landing gear you can use # LC276602 or # LG-179015. Either one will work.
  view full answer...
• Looking For Replacement Gearbox For Venture 142178 Landing Gear On 2018 Forest River XLR 5th Wheel
  Hey Brad, thanks for reaching out. Yea it definitely sounds like you are on the right track here. The fact that the motor keeps running but you're seeing a momentary pause in the cross shaft when the click happens is a pretty good sign that something in the drive system is slipping under load. A worn or damaged gearbox is definitely a possibility, especially if the noise is coming from the motor/gearbox assembly itself. The Venture gearboxes are known to wear over time, and a chipped gear...
  view full answer...
• Replacement Gear Box for Venture Landing Gear part Number VMC940RB
  Hey Dave, the correct gear box to replace a Venture VMC940RB is the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602.
  view full answer...
• Replacement Gearbox and Motor for Atwood Landing Gear
  The Lippert Components Tuson High Speed 5th Wheel RV Landing Gear Motor # LC141893 is just the motor but if you need to replace the gearbox as well you can do so with part # LC276602.
  view full answer...
• Replacement Landing Gear for Atwood Set that is on 1998 Jayco
  Hey Brian, I would recommend just starting totally over with a new landing gear set like the Stromberg Carlson part # LG-1. At one point there was some confusion on whether or not the Atwood landing gear components were interchangeable with the other brands like Lippert, LCI, Venture, Stromberg etc. so while your old motor MIGHT work there's a big enough risk it wouldn't that I wouldn't go that route. This also gives you all new components so wouldn't have to worry about having to replace...
  view full answer...
• Replacement Gear Box For Venture Landing Gear VMC940RB On 2006 Dune Chaser 38
  The correct replacement gear box for your Venture Landing Gear VMC940RB on your 2006 Dune Chaser 38 is either the Lippert # LC276602 or the Stromberg Carlson # LG-179015. These are the same gear box, just from two different manufacturers so just go with the best deal at the time between the two. Both of these options are made of aluminum and will allow you to use the landing gear again without worry. I included a video both of the gear boxes for you to take a look at.
  view full answer...
• Replacement Landing Gear for 2016 Starcraft Fifth Wheel with Atwood Set
  I really wish we had parts for the Atwood landing gear sets still but we no longer carry them since the company is is out of business.
  view full answer...
• Does Landing Gear Leg LC179013 Attach Directly to Motor
  Hey Gary, the landing gear leg part # LC179013 actually doesn't attach directly to a motor. It attaches to a gear box like the part # LC276602 instead which then a motor attaches to. Do you have a similar landing gear setup currently that is needing a replacement leg? If so, let me know what brand it is and I'll see if we have a replacement for it. The easiest way to install 5th wheel/gooseneck 7-way is to use a kit like the part # C56000 which easily ties into a 7-way installed at the...
  view full answer...
• Replacement Motor for 1RV-200 Landing Gear Motor on 2005 NuWa Hitchhiker 5th Wheel
  Based on your description it sounds like you need a replacement motor for your landing gear. The correct replacement for your 1RV-200 is the # LC142178. If you need a replacement gear box as well then you can use the # LC276602.
  view full answer...
• Landing Gear Moving In Opposite Directions When Switch Is Activated
  One of your motors is connected backwards and you'll need to simply swap the wires at the switch assembly # LC145236. Make sure to level your landing gear before you completely finish the assembly because the motors will work in sync with each other when you switch the wires around and you want your landing gear to move at the same rate. To level your trailer, simply unplug one motor and use the other to move up or down to match, then connect the wiring in the correct order to make both...
  view full answer...
  
• Looking for Landing Gear Gear Box for Venture RV Landing Gear VMC40R8
  Hey Bernie, thanks for all of the info you listed from the Venture landing gear you have on your 2005 Salem. Based on that the correct gear box replacement would be the part # LC276602. Hows the rest of the landing gear? Do you think it's the original landing gear that came with it?
  view full answer...
• Will Lippert Components Gear Box Fit Fulton Landing Gear
  The Lippert Gear Box # LC276602 may fit your Fulton jack but they have not been tested together so I cannot say it would work. We do have replacement gears for Fulton jacks you can check out. Check out part # F0933302S00. The jack models that the gears are designed to fit are listed on the product page.
  view full answer...
• Looking For Gearbox For Landing Gear On 2005 Workhorse W22 Motorhome
  Hello Dale, thanks for reaching out We may have what you need, but I couldn’t locate a definitive spec sheet for gear box motor 66100. I did find one reference saying it is an older Atwood or Venture part, but nothing specific. That said, we do offer a gear box for venture landing gear sets. Take a look at the following: - Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602 Your best bet will be to compare this to the current gear box. As...
  view full answer...
• Which Gear Box to Use with Lippert RV Landing Gear Motor LC196308
  Hey Mitchell, the gear box part # LC276602 does work with the motor # LC196308. This motor and gear box design is very common and there is a lot of overlap between part numbers that fit both.
  view full answer...
• Availability of Repair Kits for Venture VMC940RB-216708 Lead and Follow Leg
  Hey Lary! We do have kits for both legs on your Venture VMC940RB-216708. You can use the following: -Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear # LC146059 -Lippert Venture Follow Leg Repair Kit for 5th Wheel RV Landing Gear # LC146060 We also have the gear box # LC276602 and motor # LC196308 if you need those as well. Any big trips coming up with your 5th wheel?
  view full answer...
• Can the Gearbox and Motor Be Rotated on the Stromberg Carlson Electric Landing Gear Set LG-4?
  Yes, it can and thanks for the picture! The electric motor and gearbox can be rotated to the front of the Stromberg Carlson Electric Landing Gear Set item # LG-4. What's wrong with your Venture M-9000-PK landing gear? We have some replacement parts for it. I've listed them below: Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies item # LC276602 Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor item # LC196308
  view full answer...
• Replacement Gear Box for Venture Part Number VMC940RB-010894
  If you're just looking for the gearbox the Lippert # LC276602 or Stromberg Carlson # LG-179015 will work perfectly.
  view full answer...
• Replacement Gear Box for Atwood 5th Wheel Landing Gear with a 75721 Motor
  Thank you for the pictures and information provided. While the Atwood 75721 motor and gear boxes are discontinued, we do have a gear box that will work with your Atwood 75721 motor and landing gear. - Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602 The Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies # LC276602 is made of aluminum.
  view full answer...
  
• Heavy Duty Replacement Landing Gear Motor For Venture M-9000-PK
  There is a heavier-duty option to replace the Venture M-9000-PK landing gear motor than the 5,000 lb capacity Lippert Venture 5th Wheel RV Landing Gear Motor # LC142178. While that is the correct fit, if you want a higher rated capacity you can definitely do that with a motor from Lippert that has a 6,500 lb capacity: - Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor # LC196308 This is the motor only, and since you mentioned gear box, if you need that as well the correct part...
  view full answer...
• Recommended Upgraded Motor for 5th Wheel Landing Gear
  Though I was unable to find out anything about your current 12534 motor, we may still have a more heavy duty option available for you. The Lippert HD 6,500 lb Motor # LC196308 will fit the standard gearbox that is on most landing gear, like the # LC276602, but with it rated up to 6,500 pounds, it will most likely be more heavy duty than what came standard on your landing gear. However, this will be the highest rated motor that we currently carry. If your current motor is also rated up...
  view full answer...
• Replacement for Gear Box on Venture Landing Gear VMC940RB
  The correct replacement gear box for your Venture landing gear VMC940RB is part # LC276602. This features cast aluminum construction that will last longer than a composite gearbox like # RVLG-RDBOX which fits Ram brand landing gear model # RVLG-8000.
  view full answer...
  
• Replacement Motor Solution for Venture VMC940RB
  The replacement motor for your Lippert Venture VMC940RB would be the Replacement Motor for Stromberg Carlson Electric Landing Gear Set # LC196308. The Replacement Gearbox # LC276602 is correct too if you needed that as well.
  view full answer...
• Replacement Motor For The Atwood 75721 Electric Landing Gear Motor
  The Venture M-9000HT is also known as the Replacement Motor for Stromberg Carlson Electric Landing Gear - 5,500 lbs # LG-142178 and is the direct replacement for the Atwood 75721 Motor. The gearbox assembly is a little different between the two motors so you'll also need the Replacement Gearbox for Venture Aluminum Electric 5th Wheel RV Landing Gear Assemblies Item # LC276602.
  view full answer...

Do you have a question about this Accessories and Part?