Product Experts Available Now!
Call 1-800-940-8924
Ark Drop Down Corner RV Stabilizer Jacks - 24" Long Corner Steadies - Black - Qty 2
(197 reviews)
Price: $209.00
In Stock
Ark
Ark Drop Down Corner RV Stabilizer Jacks - 24" Long Corner Steadies - Black - Qty 2
Part Number: ARK34FR
In Stock
$209.00
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (197)
- Q & A (0)
- Videos (1)
- Photos
Ark Camper Jacks - ARK34FR
Highlights
- Keeps Campers Rock-Free: Corner steadies lock in place to minimize chassis movement for a solid, steady feel once parked.
- Swings Down Fast: Locking swivel brackets and large grip handles make raising and lowering simple and controlled.
- Stays Quiet on Site: Silencer pads reduce vibration noise so movement inside the camper feels stable and calm.
- Holds Firm on Soft Ground: Large, flat load-bearing feet give sure footing when parked on dirt or grass.
- Lasts Through Wet Trips: Black powder coat finish resists corrosion and salt spray for long-term outdoor use.
Features to know about
Locks Down Your Camper: Drop-Down Design That Stops the Rocking
Nothing ruins a setup faster than a wobbly camper. These Ark Drop Down Corner RV Stabilizer Jacks lock your frame solid so you can move around without feeling every step. The swiveling legs drop straight down or angle out to fit uneven spots, giving you flexibility and a firm stance every time you park. Once welded in place, they take the sway out of walking, loading, or unloading gear so everything feels steady and secure.
Built to Stay Quiet and Steady: Silencer Pads and Locking Swivel Brackets
Vibration and rattle might seem small, but over a whole weekend they get old fast. Each jack has silencer pads that cut down noise caused by vibration, plus a locking swivel bracket that keeps the leg firmly in place once lowered. The big grip handle gives you control when rotating the leg into position so you can lock it down smoothly without fighting stiff hardware or loose pivots.
Holds Strong on Soft Ground: Large Flat Load-Bearing Feet
Setting up on grass or gravel doesn’t have to mean sinking or shifting overnight. The large flat feet spread out the weight of your camper so every corner stays planted. They perform well on soft ground where smaller feet would dig in or tilt, keeping your setup level and stable until it’s time to pack up again.
Ready for the Long Haul: Corrosion-Resistant Black Powder Coat
Outdoor gear takes a beating from weather and road grime, but these jacks are built to handle it. The steel body is finished with a black powder coat that’s corrosion- and rust-resistant with a 600-hour salt spray rating. That means season after season of reliable performance without worrying about rusted joints or seized parts from exposure.
Simple Manual Operation: Winding Handle Included
Raising and lowering each jack is straightforward thanks to the included winding handle that makes dispatching the steadies simple.
Specs
Dimensions
- Length: 24"
Warranty
- Warranty: 12 Month warranty
DDS600B Ark Drop Down Corner RV Stabilizer Jack Kit - 2' Long Corner Steadies - Black - Quantity 2
Video of Ark Drop Down Corner RV Stabilizer Jacks - 24" Long Corner Steadies - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Ark Drop Down Corner RV Stabilizer Jacks Review
Michael: Hi there. I'm Michael with etrailer.com. Today we're going to take a quick look at the Ark Drop Down Corner RV stabilizing jack kit. This kit is going to come with two of these jacks, as well as a winding handle to raise and lower them. These jacks are stabilizer jacks so they're going to allow your chassis to move less. Once you get to your destination, you'll lower these down, and they'll give you a little bit more stability for your camper so that you're not having that rocking sensation as you're moving around in your camper.
These are not designed to lift any weight, so they're not going to be lifting jacks. So keep that in mind, make sure that you're getting the right jack for your needs.These jacks are really nice. One thing I like about them, they have these nice wide feet so even if you are setting up on soft earth, they're not going to sink in. They're about 6" wide by about 6" tall, so nice wide foot there. They do pivot so even if you are setting up on un-level ground, these will accommodate so that you always have sure footing there.
As far as our height goes, when we have it fully retracted like it is now, it sits about 16 and a half inches. So pretty compact, easy to transport. And then when we have it fully extended it's right about 24 and a half inches. It's right about 2ft in total height so you can see the difference between our extended and retracted options there. As far as getting these mounted in place, it's going to be very...
there's a lot of options for you.So this plate up here that I'm going to take off real fast, this is your weld-on plate. It's connected with these long bolts. This can be welded onto the chassis of your camper. That way, if you ever need to take the jack off, if something we're to.. one of the components we're to fail or something, you need to replace the jack, you can just remove those bolts and remove the jack from that weld-on plate.
You won't have to worry about breaking your welds or anything like that. Alternatively, if you don't like welding, you can just discard this weld-on plate and then drill a couple of holes in the top of the jack there and bolt this in place. So either option will work. Just a matter of preference, up to you which one you prefer. But once you have this plate where you want it, it is very easy to put these bolts back in and get those nuts on the end. They tighten down with a 13mm wrench and socket.Another really nice feature is this adjustable mechanism here. So it's got a nice wide handle, very easy to grip, and then you simply pull back on it. It's spring-loaded so those pins will disengage and it will allow this head to pivot. There's multiple locations that it can lock into to maximize the angles that you're working with. But then when you want to retract it, put it away, it will sit up there like that. So once you have this welded in place, this will be sitting parallel to your chassis. So it will sit up nice and tight. And you can see that our foot here does automatically drop down like that. But as you're traveling down the road, it might bounce around a lot. One of the nice features of this, you can close the handle to get access to your port here. And if you retract this enough it will lock that foot in place so that it's not going to wobble around and move. I could actually probably tighten that down just a little bit more.But you also have these pads on either side that are going to help prevent that metal-on-metal contact. So even if this is just a little bit loose, it won't make as much noise. So that will help as we're traveling down the road, not having to worry about the noise that's rattling around down there because there won't be any. This does have a black powdercoat finish to it. So it's going to be nice and rust and corrosion-resistant. So it should do a good job, hold up well for a long time. And this handle is very easy to use. Just as you've seen me do, just get it in place there. It's got a twisting knob on the end and then a grip here in the middle. So very easy to extend our jack and retract it again.So if you're looking for a stabilizing jack set I'd say this is going to be a great option for you. It's got a lot of nice features to it and the weld-on plate or bolting-on option should fit for just about any application out there. So that's going to complete our look for today. This set is the 2ft set. There is a slightly larger set as well that we have available here at etrailer.com. So if this isn't going to extend as far as you need it to I'd recommend you checking that one out, it might better suit your needs. So that's going to complete our look for today. Thanks for watching. Again, I'm Michael with etrailer.com and we'll see you next time.
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.6
197 reviews
by:
Gregg
10/21/2024
These are incredible! I have a teardrop camper that came with "scissor" type stabilizers, and they almost immediately broke. They were very difficult to raise and lower and I needed an impact drill to make them work, only weeks after delivery. Unfortunately the company went out of business and I was forced to find my own solution. eTrailer.com to the rescue!
I bought 2 sets so I could have one on each corner of my Teardrop Camper. I got them welded locally for just over $300, and couldn't be happier. These drop down straight with just a bit of ground clearance. Although the primary purpose is stabilization, I could use these to jack up the whole side of my camper to change a tire now. No more going underneath and jacking it up manually anymore. I love how they can be set at an angle or straight up and down. My only question is why didn't the builder of my camper put these on in the first place! If I am going to have stabilizers that are used every time I go out, why not have the best? Love these, highly recommend.
I bought 2 sets so I could have one on each corner of my Teardrop Camper. I got them welded locally for just over $300, and couldn't be happier. These drop down straight with just a bit of ground clearance. Although the primary purpose is stabilization, I could use these to jack up the whole side of my camper to change a tire now. No more going underneath and jacking it up manually anymore. I love how they can be set at an angle or straight up and down. My only question is why didn't the builder of my camper put these on in the first place! If I am going to have stabilizers that are used every time I go out, why not have the best? Love these, highly recommend.
by:
Mike
09/16/2020
These stabilizers are exactly what I needed for a class C camper. Installation was exactly like your tech video described. Etrailer is awesome, thanks!!
by:
Brian
05/24/2025
We had these installed on our trailer and used them on a five-state trip over three weeks. I love how easy they are to use and the stability. My only drawback is which size to use. A shorter version would work better that the 22 inch version i bought. In some areas it was too tall to go vertical in rough terrain or sloping KOA spaces I'm glad the company includes a 45 degree lock in setting so we were able to use that option on ours.
by:
Herbert
08/18/2025
Very happy with the jacks
by:
Kevin
05/08/2026
Great product. Seem to be very well made
by:
Randy
06/05/2024
Easy install, work perfect. E-Trailer was very helpful, fast delivery, best price.
Randy
6/6/2025
After 1 year still works like new. No rust, powder coat in fantastic. Excellent addition to stability of our camper.
by:
David
04/04/2024
Product works great. Any 3/4 inch socket can raise and lower the jack. Fully adjustable from vertical to ground to perpendicular and many stops in between. They can rotate to work on left or right side. I drilled and bolted them on. No problem.
by:
Victor
08/14/2025
The item arrived on time, and the customer service was great.
by:
Nicholas
07/26/2022
Great product, welded the mounts to the front rails of the trailer and was easy to use. Took the weight off the hitch lift. A driver tried to drive off and forgot to raise the stabilizers and damaged them badly. Replacements were easy to attach to the welded mount. We are back in operation.
by:
Troy
03/01/2023
Great product but… VERY poorly packed for shipping! Both of my shipments were delivered falling out of the cartons. If these weren’t so bombproof, they would of been destroyed. Only 1 of the four I ordered was bent at delivery.
by:
John
10/12/2022
Love the stabilizer operation style. Would like to see a slightly shorter one as the required clearance needed to swing down at some camp sites is difficult
by:
Bryan
08/29/2024
Jack is really strong much better than I figured
Def has a down side of very hard to release and drop down
I can hardly do it sometimes and no way my wife can
Absolutely needs to be more user friendly in that aspect
Def has a down side of very hard to release and drop down
I can hardly do it sometimes and no way my wife can
Absolutely needs to be more user friendly in that aspect
by:
Richard
09/09/2021
These jacks work exactly like they should. I think it was a very good investment for my 34 foot bumper pull camper. Highly recommended!
by:
Dayton
07/21/2024
Installed these on my pop up trailer, so much easier to use than original jacks!
by:
Darryle
06/04/2025
Arrived early....fast shipping. Was double boxed so product was well protected. Will be installing them on my RV soon. Trial fit looks like they will work excellent.
by:
Elmer
10/29/2021
The Jacks were delivered on time, will not hesitate do buy again from etrailer.com.
by:
Tim
07/05/2022
Had one of the two jacks fail to extend more than 2" from start? Other jack works fine! Only stableizing 1800 lbs. I need only one replacement.
Katrina B.
8/4/2022
I have gotten in contact with the manufacturer and they have confirmed that there is a one year warranty on this item. I have sent your information over to our customer service department for them to assist you in this.
by:
Zachary
12/04/2024
These initials came with rust and had to be replaced.
They are absolutely useless when vertical, but are half decent when extended to the side (only for side to side movement, still a ton of play for front to back movement). I would not recommend.
They are absolutely useless when vertical, but are half decent when extended to the side (only for side to side movement, still a ton of play for front to back movement). I would not recommend.
by:
Joshua
03/17/2022
Great thank you exactly what I needed.
by:
Paul
03/20/2026
by:
David
08/29/2025
by:
Gary
06/10/2026
by:
Jared
06/25/2026
by:
Stepan
05/12/2021
by:
Joe
04/20/2021
25
197
true
Show More Reviews
See what our Experts say about this Ark Camper Jacks
- Availability Of 33" Ark Stabilizer Jack And Dimensional Diagrams Of Similar Ark Corner SteadiesWe do carry the 33" Ark Stabilizer Jack that you are looking for with part # ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" # ARK94FR and the 24" # ARK34FR Stabilizer jacks. I'm afraid we don't have a drawing for the 33" jack.
view full answer...
- Are There Strong Arm Stabilizers For 2 Rear Scissor Jacks On Camper?Hey John, while we have something that'll work for you, we don't have Strong Arm stabilizer kits for just the 2 rear jacks; only 4 jacks. You could opt to replace the scissor jacks with Ark Drop Down Corner RV Stabilizer Jacks - 30" Long Corner Steadies - Silver - Qty 2 # AR94FR or Ark Drop Down Corner RV Stabilizer Jacks - 24" Long Corner Steadies - Black - Qty 2 # ARK34FR. Sorry we don't have exactly what you were looking for! What kind of trailer do you have and what jacks are on the...
view full answer... - Do Ark Drop Down Corner Steadies and Ark XO Have Same CapacityHey Kevin! the Ark XO Drop Down Corner # ARK87FR has a support capacity of 1,925 lbs per jack. For some reason a capacity made its way onto the Ark Drop Down Corner Steadies # ARK34FR page and others like it which will need to be corrected. However, these do not have an actual capacity since they're only designed for stabilization. The XO is the only one rated to hold any significant amount of weight. It looks like you went ahead and grabbed the # ARK87FR so you made the right choice.
view full answer... - Best Stabilizer Jacks For Wildwood 26' Travel Trailer With 17" From Frame To GroundHello Tammy, thanks for reaching out. The Ark Drop Down Corner RV Stabilizer Jacks # ARK34FR are 16.6" long when retracted, so it sounds like you would have just enough room to swing them down when on level ground. You will be cutting it close though, so if the ground was not perfectly level you might run into issues. A better option might be the Stallion Stabilizer Jacks # 288-01892-2. These are 15-1/4" long retracted and they extend to 22-1/4". So these would work regardless if you...
view full answer... - Overall Length of the 24" and 30" Ark Drop Down Corner Stabilizer JacksI contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks # ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6") extended. The Ark Drop Down Corner RV Stabilizer Jacks # ARK94FR are 497mm (19.5") collapsed and 774mm (30.5") extended. I have included the diagrams that they provided me for you to check out.
view full answer...
- How to Determine Correct Length of Ark StabilizersThe Ark stabilizers won't affect your ground clearance, but to determine the right ones that really depends on how high up your frame is off the ground. Overall, the Ark RV Stabilizer Jacks # ARK34FR are 16.6" collapsed and 23.6" extended, while the Ark # ARK94FR 19.5" collapsed and 30.5" extended. So you'll want to measure the distance from the ground to the frame where you plan on installing the stabilizers and use the lengths to find the right size. You just want to be sure the lengths...
view full answer... - Recommended Weld-On Drop Leg Stabilizers For A UTV Trailer We carry a few different weld-on camper jacks to help stabilize your trailer and allow you to easily get your equipment off the trailer. The real question is going to be how long of a jack do you need? The Square Drop Leg Stabilizer Jack - 18" Travel # SJ-R208 you were looking at would work for your needs but we have a few other options that are a bit more compact to ensure you have plenty of clearance. Starting out small we have the etrailer Stabilizer Jacks # TJ01RT-HD, which have a...
view full answer... - Recommended Replacements for Airstream 400914-03 Stabilizer JacksThe ARK # ARK94FR stabilizer jacks could work for you, but you'll likely find they're too tall. The jacks measure 30 inches tall when fully extended or 19-1/2 inches tall when fully retracted. The existing 400914-03 jacks on your Airstream have a fully extended length of 19 inches, so these likely wouldn't be a good fit. The ARK # ARK34FR is height adjustable from 16-24 inches, so it would be more similar to your existing jack in that respect, so that's what I'd recommend going with. They're...
view full answer... - What are the Outside Dimensions of the Ark Drop Down Corner RV Stabilizer Weld BracketThe weld bracket on the top of the Ark Drop Down Corner RV Stabilizer Jack Kit # ARK34FR is 4.6063" long and the surface that would make contact is 1.8307" wide. The overall width is 2.8543" on the top. I have attached a dimensional drawing from Ark showing all of the dimensions (in millimeters) for your reference.
view full answer...
- Stabilizer Jacks for R-Pod 195 CamperWe don't offer a combination leveler/stabilizer jack, but if you're wanting something in a stabilizer jack that is very sturdy, you can't go wrong with the ARK Drop Down Corner stabilizer jacks. They're available in a powder coat or a zinc finish, in 24 or 30 inch lengths. • 24 inch length in powder coat as part # ARK34FR or zinc as part # AR34FR • 30 inch length in powder coat as part # ARK94FR or zinc as part # AR94FR The manufacturer, ARK is located in Australia where off-road trailering...
view full answer... - Will Ark Drop Down Corner RV Stabilizer Jack Kit Work for Off-Road CamperThe Ark Drop Down Corner RV Stabilizer Jack Kit # ARK34FR will work great on your Black Series HQ15 Camper. You will install these by welding them to the bottom of the frame near the rear of your camper.
view full answer... - What Is the Weight Capacity of the Ark Drop Down Corner RV Stabilizer Jack KitI checked with Ark, the manufacturer, and they do not list a specific weight capacity for the Ark Drop Down Corner RV Stabilizer Jack Kit part # ARK34FR. This is because the stabilizers are just that, stabilizers, they are only designed to stabilize a portion of the trailer not support its weight. I know this can be frustrating to consumers but you just need to use your best judgment in regards to weight. The exact literature of the manufacturer in regards to capacity is as follows, "Corner...
view full answer... - Powder Coating Quality Of The Ark Drop Down Corner RV Stabilizer Jacks The black powder coating on the casing of the Ark Drop Down Corner RV Stabilizer Jack Kit # ARK34FR will last for years but the legs that slide up into the casings are not powder coated, as you can see the product pictures, so they will show metal.
view full answer... - Can Ark Drop Down Stabilizers be Used on Trailer With Corner JacksYes, your trailer with corner jacks can still absolutely use the Ark stabilizers: - Ark Drop Down Corner RV Stabilizer Jack Kit - 24" Long Corner Steadies # ARK34FR These will weld to the bottom of your trailer's frame, you just need to make sure you have enough room that they won't interfere with the function of your jacks and they will do a very nice job of steadying your trailer when walking inside.
view full answer... - Are the Ark Drop Down Corner Stabilizers Rated For a Particular Weight CapacityThe ARK Drop Down Corner RV Stabilizer Jack Kit # ARK34FR do not have a weight capacity listed because they're not designed to act in a true weight bearing manner. The ARK # ARK34FR are only designed to act as corner stabilizers to minimize movement in the coach and not as the primary weight bearing solution for your coach; as long as you're only using them as corner stabilizers in conjunction with your landing gear or jacks, these can be used on both small trailers all the way up to Class...
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Edited by:
Lindsey S
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Eric H
Updated by:
Manda E
Written by:
Kristina F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gregg M.
10/21/2025
After a year, my original review stands. Get these, you wont regret it.