bing tracking image
  1. Camper Jacks
  2. Stromberg Carlson
  3. Landing Gear
  4. Fifth Wheel Landing Gear
  5. 6001 - 7000 lbs
  6. Electric Jack
Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs

Item # LG-3
Retail:$904.24
Our Price: $640.33
You Save: $263.91
Camper Jacks
This item qualifies for Free Shipping
Shipping Weight: 76 lbs
Quantity: 
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K. 1-833-496-1390 to order Stromberg Carlson camper jacks part number LG-3 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (139)
  • Q & A (0)
  • Photos
  • Why etrailer?

Stromberg Carlson Camper Jacks - LG-3

  • Landing Gear
  • Fifth Wheel Landing Gear
  • 6001 - 7000 lbs
  • Electric Jack
  • 35 Inch Lift
  • 2 Jacks
  • Weld-On
  • Stromberg Carlson

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.


Features:

  • Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV
  • Electric-powered adjustment for easy operation
  • Direct drive reduces strain on your jack and allows landing gear to lift with ease
    • No clutch that could slip
  • Single-speed motor won't trip circuits or cause problems with coach's electrical systems
    • IP-rated switch will not spark, so it can be mounted safely in bottle-gas area
  • Drop legs minimize jacking time and help to level the trailer on uneven ground
    • Legs adjust in 1" increments
  • Cage pins included to release drop legs
    • Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release
  • Hand crank included for manual operation
  • Heavy-duty steel construction
  • Gearbox is housed in a corrosion-resistant aluminum body
  • Landing gear welds onto trailer frame
  • Set includes 2 jacks, gearbox, motor, switch, footplates, cross shaft, hand crank, and hardware
  • Made in the USA


Specs:

  • Leg length: 29-1/2"
  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Rate of travel: 5-1/2" per minute
  • Combined weight capacity: 6,500 lbs
  • Cross shaft length: 41" - 71"
  • Footplate dimensions: 8" long x 5" wide x 2" tall
  • Outer tube width: 2-1/2"
  • 1-Year warranty


Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.


Stromberg Carlson's landing gear was designed with safety in mind. The motor, manufactured by Lippert, won't trip circuits or cause problems with the coach's electrical systems. In addition, the IP-rated switch will not spark, so it can be mounted safely in the bottle-gas area.


Convenience is also a hallmark of this product. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights, saving time and thus reducing the draw on the trailer's battery. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.


This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your existing mounting hardware.



LG-3 Stromberg Carlson Deluxe Electric Landing Gear for Fifth Wheel

Installation Details LG-3 Installation instructions


California residents: click here


Customer Satisfaction Score:


Customer Reviews

Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs - LG-3

Average Customer Rating:  4.7 out of 5 stars   (139 Customer Reviews)

Electric, fifth-wheel landing gear set's motor has an IP-rated switch for fast, easy, and safe operation. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity is 6.5K.

by:

The motor on my 2002 Carriage Cameo landing gear went bad. This motor is louder than the original one was but it is also faster than the original one. The legs are a couple of inches shorter but not hard to work with. I do most of my own work on my vehicles, so found them easy to install.


Comments
They have worked flawlessly for the past year and Im very pleased with the purchase!
Charles M - 10/10/2022


by:

Let me start by saying this review is about the product, not e-trailer. etrailer is great. I love doing business with them. Their prices beat anybody, and the free and FAST shipping is a bonus. Now to the review of the LG-3 landing gear. The pros of this product are they are a direct replacement for the Lippert system on my trailer. No cutting, drilling or welding. They fit in the original brackets. I installed them while camping in about 2 hours with simple hand tools. The cons are they are a direct replacement for the Lippert system on my trailer. They use the same weak motor, that struggles to lift my trailer. The kit was missing bolts and pins and I had to use my old hardware until I could get back to town to buy new hardware. I wanted to go with the Bulldog 10K system, but wanted something that work with my Lippert remote system. The original system failed. I suspect this one will too. Next time I will go with something heavy enough to do the job. Check out the before and after pics and the pic of what can happen when your jacks fail and you have to resort to using hydraulic jacks to lift your trailer. A $4000.00 repair that could have been much worse.


Comments
So far these are working. I got the higher torque model, which operates at a lower speed. I dont necessarily like the slower speed, but hey, at least they go up and down and the trailer hasnt fallen on my truck again. I am still disappointed that this landing gear is supplied by the manufacturer. It is woefully inadequate. As a side note, it is impossible to raise these legs with the coat hanger they give you for a hand-crank. This thing is ridiculous. That is why I keep a set of bottle jacks on-hand just in case of emergencies, and hope I never have to use them again.
Steve B - 09/20/2018



by:

The jacks do not have grease serts and no way to keep the gears and drive lubricated. The motor is wired backwards so the legs operate opposite of what the buttons indicate.




by:

I would recommend to anyone who needs parts for their travel trailer.

Etrailer keeps you informed on the progress of your order and if you have any issues they resolve it asap.

Great place to do business with.




by:

With a few minor modifications, I mounted the landing gear on our 1998 5th wheel and all is well. Has worked flawlessly since. Thanks for the fast delivery and great service.


Comments
Outstanding product. Installed easily and works flawlessly.
Lane J - 12/12/2021


by:

We installed the landing gear for our Montana.... it was a perfect fit. We highly recommend you. Thank you




by:

This landing gear was perfect for my trailer. They are really strong and can lift just about anything. I will say though, they are very slow. The electric motor isn't all that slow but doing it by hand takes a long time. But that's just a backup anyways.




by:

This is not the first time I have ordered products from etrailer. Received this products within a week when ordered. Install the replacement jacks from the orginals work great. Thank you




by:

I have a 2008 Keystone Montana Mountaineer 345DBQ. My Lippert Landing gear had broken with age and wear causing my truck and fifth wheel had become one. I was desperate to get the landing gear fixed for a trip in 6 days. Sandy J assisted me on the phone on a SUNDAY afternoon and was able to have the parts on my doorstep by noon on the following Thursday. The installation took me less than two hours and the landing gear works perfectly. It is quiet and operates very smoothly. I recommend etrailer to my family and RVing friends. They saved my vacation!




by:

etrailer was extremely helpful finding a replacement for my RV 5th wheel landing gear. I have a '08 Cardinal 3100RK and the RF landing gear failed. The LG-3 was a drop-in replacement so I did not have to use the weld-on frame brackets that come with the package. I had to do a little grinding on the "follow" leg but otherwise it was a simple installation.




by:

I replaced my landing gear with this unit a year ago. It fit perfectly on my 2007 37ft keystone challenger. Easy to install, took about two hours to complete. Not overly powerful motor but as good as original equipment. My trailer weighs 12000#. No issues so far.




by:

The landing gear that I bought from Etrailer was the exact one I needed. The lady that helped me did a great job. I was not sure of what I needed but she knew the correct parts and the correct size. I am very happy that I bought from this company.




by:

Happy with the product so far. It was easy to install, the harness was complete for the motor. The only issue I had was the switch plate got cracked during shipping and the switch operated backwards from the label, but just have to switch wires around to motor to correct. Will see how reliable the motor is because the trailer gets used a lot.




by:

The LG3 system was a direct replacement for my original Atwood system.spacing was correct but I needed to grind about .020 off the top of the existing bracket. The jacks then bolted in perfectly. However the wiring diagram is incorrect for the leads to the motor from the switch. Just reverse the polarity by switching the wires.
The instructions are vague.




by:

I replaced both landing gear, motor and gear box on my fifth wheel. I was able to install all of it within a few hours with very little assistance. Mandy was very helpful from choosing the right set to keeping me informed on the shipment. I will definitely purchase all my trailer parts from etrailer in the future.




by:

They work good a little under powerd compared to the original ones if I run them for more then 10 seconds lifting the trailer the fuse burns not sure why but they get the job done




by:

Received in a timely manner. Exact fit. The original landing gear on out fifth wheel had gotten very weak and would stall out during the lifting process. The LG-3 lifts our 33 footer with ease.




by:

This unit was installed to replace the identical unit that failed. It operates very smooth and does the job. The failed unit was completely dry of lubrication on the jack screw that is attached to the tube that telescopes up and down. Venture Manufacturing now lubricates these and suggests periodic lubrication.




by:

Fast, free shipping, three days from order to porch. Installed easily was almost a direct replacement for the manual landing gear that was on the trailer. The 6500 pound motor is fast but not very quite. Beats hand cranking any day of the week.




by:

Delivered right on time. Installation was quick as these were an exact replacement part. Had 5th wheel back to normal in no time. Now I can drive my truck again! I would recommend etrailer to anyone with an RV. Great service..




by:

works great




by:

Received product as promised and in good condition. Installed it yesterday without too much fan fair. Working on any RV is always is treat. The only thing that didn't seem to fit was the cross rod, it was too short to go across our 5th wheel and ours isn't an over wide one. Just used the old rod and so far everything works fine. I didn't measure the width when we were ordered I concentrated on the length of the main tubes. All is good




by:

Perfect replacement for my factory original. Reused my original welded brackets, so less than 3 hours to complete, by myself. Hard to find detail, but the length to order is the length of outer black tube.




by:

The gearbox was a lot heavier duty than original. Very happy with purchase.




by:

etrailer help me out on getting the wright part that I needed and it works great.



25
139
Show More Reviews

See what our Experts say about this Stromberg Carlson Camper Jacks

  • How to Determine Replacement Landing Gear for Keystone Fuzion
    I can tell you exactly how to determine what replacement landing gear you need for your 2012 Keystone Fuzion FZ310, though we don't have any way of knowing what will work for any one specific trailer, which means you'll need to take some pretty simple measurements. Additionally, I recommend replacing the entire unit as opposed to just one side because this will ensure compatibility of all parts as well as weight capacities being equal. To determine the correct replacement landing gear,...
    view full answer...
    Image 1 for
  • How to Determine Correct Replacement Landing Gear
    To determine the correct replacement landing gear for your 5th wheel trailer, you will need to measure the mounting brackets on your trailer from the underside of the top bracket to the top of the lower bracket as shown in the diagram. From there you will be able to choose the amount of lift and weight capacity that will work for you. For example, the Stromberg Carlson Electric Landing Gear Set # LG-3 has standard dimensions of 17-1/2" from bracket to bracket, 34-7/8" of lift and a 6,500...
    view full answer...
    Image 1 for
  • Is Replacement Internal Screw Available for Atwood 5th Wheel Landing Gear
    While there are some parts like gearboxes and/or motors that can be interchanged between landing gear, the internal screw isn't one of those parts. Since Atwood was bought out a lot of their replacement parts aren't available. Even though we don't have a replacement screw for your Atwood landing gear I do have an option for you to replace your whole landing gear with the Stromberg Carlson Electric Landing Gear Set # LG-3. This is a complete set with the motor, switch, and manual handle...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for Fleetwood Trailer
    The Stromberg Carlson Electric Landing Gear Set # LG-3 referenced in your question features a standard weld stop dimension of 17-1/2 inches from outside to outside on the weld stops. You mentioned that you took your 17-1/2 inch measurement from the bottom of the top weld stop to the bottom of the bottom weld stop. If you actually took this measurement from the top of the top weld stop to the bottom of the bottom weld stop, then this system will bolt up perfectly to your existing brackets....
    view full answer...
    Image 1 for
  • Can the Gears Inside an Atwood Landing Gear Set Be Replaced
    I do have an option for you but Atwood has since gone out of business and there are no repair kits for their landing gear legs. Therefore, the only option you have would be to replace the entire set. For this, the Stromberg Carlson Electric Landing Gear Set part # LG-3 is a very popular option. It comes with new brackets if yours do not match the required 17-1/2" outside to outside and 15-1/2" inside to inside for the above.
    view full answer...
  • Replacement Landing Gear System for 2010 Palomino Sabre 31RETS
    Based on the weld stop measurement you listed and the GVWR of the 2010 Palomino Sabre 31RETS the Stromberg Carlson Electric Landing Gear Set # LG-3 will work really well. This system features a 6,500 pound weight capacity, provides a total lift of 34-7/8 inches, and weld stops that are spaced apart by 15-1/2 inches inside to inside (and 17-1/2 inches outside to outside) so you can use your existing brackets. A hand crank is included for manual operation if you lose power, and the direct...
    view full answer...
  • 5th Wheel Landing Gear Works Opposite of Switch
    If you reverse the leads from the switch as you described, the motor on your landing gear will work correctly.
    view full answer...
  • Landing Gear Replacement Recommendation for 2011 Fuzion Toy Hauler
    I'd go with a powered set of landing gear for your toy hauler as that will make operating them much easier since you'd be just holding down a button instead of having to crank the jacks up and down. For that I'd recommend the Stromberg kit part # LG-3 as this kit has a faster speed motor and a higher weight capacity so it will raise and lower the trailer quicker than other options out there. This jack also fits the standard mounting bracket dimensions found on most 5th wheel trailer so...
    view full answer...
  • Replacement Landing Gear For 2004 Forest River Sierra 5th Wheel
    In order to pick out the direct replacement for your landing gear on the 2004 37 Ft Sierra toy hauler I would need to know the measurement between the mounting brackets. The most common measurement is 17-1/2" but if your landing gear brackets do not measure 17-1/2" you can remove the brackets and weld the new ones to the trailer. You also want to make sure the landing gear lift is not shorter than the landing gear you have now. The Stromberg Carlson Electric Landing Gear Set with 34-7/8"...
    view full answer...
  • Is Replacement 30-3/4" Landing Gear Lead Leg Available
    I do have a solution for you but I'm not seeing that we carry a replacement lead leg that measures 30-3/4" tall like what you are asking about. Since you want to make sure that your landing gear legs have the same gear ratio as well I recommend replacing both legs to ensure everything works properly. For your application I recommend using the Stromberg Carlson Electric Landing Gear Set # LG-3 which have the standard 15-1/2" or 17-1/2" weld stop measurements, a 6,500 lb weight rating,...
    view full answer...
    Image 1 for
  • 1996 Terry 5th Wheel Landing Gear Replacement
    The distance you mentioned between your landing gear weld stops is not a standard distance so while we can help you get a new set that will fit, you will have to have the brackets on the trailer frame moved to accommodate the new landing gear. The # LG-3 that you referenced would be a great solution as it has a motor which will make raising and lowering the jacks much easier than using a manual crank. This comes with a manual crank too though in case of a situation where you lose power...
    view full answer...
    Image 1 for
  • Recommended Landing Gear Replacement When Parts Aren't Available To Rebuild
    We only have certain replacement parts like what you have already found available from the manufacturers. They often don't offer every part like you are stating as a replacement part. You would be mixing parts and rigging at best. I recommend replacing your landing gear with the Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs # LG-3. This will give you a completely new landing gear system that is confirmed to work and is under warranty.
    view full answer...
  • What Is The Travel Speed Of The Stromberg Carlson Electric Landing Gear # LG-3
    The Stromberg Carlson Electric Landing Gear Set # LG-3, will retract at a rate of 5.5 inches per minute. I called Stromberg Carlson and they were not able to tell me what the speed rate was when lifting the trailer. This rate is based on a trailer that does not exceed the 6,500 lb capacity.
    view full answer...
  • Recommendation to Replace Landing Gear on 2006 Keystone Cougar 5th Wheel Trailer
    To replace the landing gear system on your 2006 Keystone Cougar I recommend taking a look at the Stromberg Carlson Electric Landing Gear Set # LG-3. This is a really nice system that features electric-powered adjustment for easy operation and heavy-duty steel construction that will hold up great over time. It has a combined weight capacity of 6,500 pounds. The outer tube of the landing gear legs measure 29-1/2 inches tall with weld stops that are spaced apart 15-1/2 inches inside to inside....
    view full answer...
  • How to Determine Correct Replacement Landing Gear For 5th Wheel
    We can help you determine the correct replacement landing gear for your Monta Vista, though landing gear is a universal type of fit, and there isn't specific landing gear that fits your trailer. So in order to determine the correct replacement landing gear, all you will need you will need to do is measure the distance mounting brackets on your trailer from the underside of the top bracket to the top of the lower bracket as shown in the diagram. From there you will be able to choose the...
    view full answer...
    Image 1 for
  • How to Determine the Correct Replacement Landing Gear for a 2008 Forest River Wildwood 5th Wheel
    Given the description of your problems, combined with the age and lack of information available for your landing gear your best bet is going to be to replace the landing gear. To determine the correct replacement landing gear for your 5th wheel trailer, you will need to measure the mounting brackets on your trailer from the underside of the top bracket to the top of the lower bracket as shown in the diagram. From there you will be able to choose the amount of lift and weight capacity...
    view full answer...
    Image 1 for
  • Recommended Replacement For An Atwood Landing Gear On A 2005 Fleetwood Prowler
    Atwood was bought out by Dometic and Lippert back in 2016 and have since stopped making these products so your getting replacement parts is nearly impossible. I recommend replacing your landing gear completely to avoid the hassle of searching through used parts hoping to find a compatible fit. You can switch to the Stromberg Carlson Electric Landing Gear Set # LG-3 you were looking at but you will have to remove the mounting brackets and weld on these new ones since the weld stops are...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 1999 Fleetwood Avion Westport
    To determine the correct replacement landing gear, you will need to measure the mounting brackets on your trailer from the underside of the top bracket to the top of the lower bracket. 17-1/2" is the standard measurement. The amount of lift you need is also important so you want to make sure the lift is not shorter than what you currently have. Assuming you find that your weld stop measurement is 17-1/2", it is likely you can use the Stromberg Carlson Electric Landing Gear Set # LG-3....
    view full answer...
    Image 1 for
  • How To Determine Which Landing Gear Will Replace My Landing Gear On My 2006 Keystone Cougar 5W?
    We'd be more than happy to help you find what landing gear you'd need for your 2006 Keystone Cougar 5th wheel, however in order to determine a landing gear that is compatible, you will just need to measure the distance between the mounting brackets on your trailer rom the underside of the top bracket, to the top of the lower bracket. I have included a diagram showing where to measure below. So, if your brackets happened to measure 17-1/2" from bracket to bracket, with 34-7/8" of lift,...
    view full answer...
    Image 1 for
  • Replacement Landing Gear for 2014 Heartland Gateway
    Yes, the Stromberg Carlson Landing Gear part # LG-3 that you referenced will fit your 2014 Heartland Gateway based on what you mentioned. What you have basically fits the majority of landing gear sets out there.
    view full answer...
  • Replacement Landing Gear for 2009 Keystone Challenger
    We do not have any type of database with a list that has the parts for each year, make and model of trailer so you will need to do some measuring to figure out what will fit on your 2009 Keystone Challenger. Measure your landing gear brackets from outside to outside like in the accompanying photo and if they have standard weld stop measurements of 17-1/2 inches outside to outside and 15-1/2 inches inside to inside I recommend checking out the Electric Landing Gear Set # LG-3.
    view full answer...
    Image 1 for
  • Solution for Atwood Landing Gear Jacks that Need New Motor and Gear Box
    We no longer have replacement landing gear parts for the Atwood landing gear sets as that company has gone out of business and the replacements you mentioned will not work without modification, so you'd need to replace the powered landing gear with a new set. The highest capacity set that is similar and will bolt right up is the Stromberg Carlson landing gear set part # LG-3 which has a 6,500 lb weight capacity. Most similar sets have a 5,500 lb capacity like the part # LG-1.
    view full answer...
  • Comparing Stromberg Carlson Landing Gear Kits LG-1 and LG-3 For 2007 Cherokee Fifth Wheel
    I would go with the # LG-3 as it has a higher capacity at 6,500 lbs which means it will move a bit quicker and have to work less hard which means it will last longer. The # LG-1 has a lower capacity at 5,500 lbs works great for a lot of people, but the # LG-3 is the better choice.
    view full answer...
  • Choosing the Correct Replacement Landing Gear for 2004 Montana 2955RL
    Both sets of the Stromberg Carlson landing gear you referenced mount to brackets that are 17-1/2 inches apart, so if your brackets have the same measurements the landing gear will fit perfectly. According to my research, the 2004 Montana 2955RL has a dry hitch weight of 1,980 lbs, so # LG-1, with a capacity of 5,500 lbs, would be a great choice. I've added a link to a video review of this landing gear for you to take a look at.
    view full answer...


< Previous



Do you have a question about this Camper Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate camper jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jacob T
Video Edited:
Jacob T
Employee Laura H
Written by:
Laura H
Employee Randy B
Installed by:
Randy B
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Jenny M
Updated by:
Jenny M
Employee Mike S
Updated by:
Mike S
Employee Matthew E
Updated by:
Matthew E
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-833-496-1390