Replacement Switch for Stromberg Carlson Electric Landing Gear

Replacement Switch for Stromberg Carlson Electric Landing Gear

Item # LG-145236

lowest price pledge

Retail:$71.68

Our Price: $52.07

You Save: 27%
Accessories and Parts

Orders above $99 qualify for Free Shipping

Shipping Weight: 1.43 lbs

Quantity: 
In Stock
Accessories and Parts LG-145236 - Switch - Stromberg Carlson
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

Videos


  • Trailer Jack
  • Camper Jack
  • Switch
  • Stromberg Carlson
Replaces the IP-rated switch for your Stromberg Carlson electric landing gear set (LG-1, LG-2, LG-3, or LG-4). Call 800-298-8924 to order Stromberg Carlson accessories and parts part number LG-145236 or order online at etrailer.com. Free expert support on all Stromberg Carlson products. Guaranteed Lowest Price and Fastest Shipping for Replacement Switch for Stromberg Carlson Electric Landing Gear. Accessories and Parts reviews from real customers.


  • All Info
  • Reviews (27)
  • Q & A (62)
  • Videos (1)
  • Photos
  • Why etrailer?

Stromberg Carlson Accessories and Parts - LG-145236

Replaces the IP-rated switch for your Stromberg Carlson electric landing gear set (LG-1, LG-2, LG-3, or LG-4).


Features:

  • Replaces the IP-rated switch for your electric, tandem landing gear
    • Designed for use with Stromberg Carlson models LG-1, LG-2, LG-3, and LG-4
    • Can be used with most electric landing gear sets, including Atwood, Venture, and Lippert models
  • Switch measures 2-1/4" long x 3-1/4" wide
  • Arc resistant switch
  • Mounting hardware included
  • Made in the USA


LG-145236 Stromberg Carlson Replacement Venture IP Rated Switch for Fifth Wheel Landing Gear







Video of Replacement Switch for Stromberg Carlson Electric Landing Gear


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Stromberg Carlson Trailer Jack LG-145236 Review

Today we're going to review part number LG-145236. This is the Stromberg Carlson Replacement Switch for the Stromberg Carlson electric landing gear. This part will replace the IP-rated switch for your tandem landing gear. It is designed for use with the Stromberg Carlson LG-1 landing gear, and we do sell that product separately on our website. The switch is a toggle switch as you can see. When you push it, you can extend, and push it to retract.

It does come with about a 4' length of wire and it comes with the wires to connect to the motor, and then the wires to connect to the power source. This will also work with most other brands of electric landing gear including Atwood and Lippert. Comes with everything shown here, the switch with the harness, the instructions and set of screws for mounting it. The switch, give you a measurement. On the mounting bracket itself is 2 1/4" wide by about 3 1/4" tall. That should do it for the review on part number LG-145236.

This is the Stromberg Carlson Replacement Switch for the Stromberg Carlson electric landing gear.


Customer Reviews

Replacement Switch for Stromberg Carlson Electric Landing Gear - LG-145236

Average Customer Rating:  4.9 out of 5 stars   (27 Customer Reviews)

Replaces the IP-rated switch for your Stromberg Carlson electric landing gear set (LG-1, LG-2, LG-3, or LG-4).

- LG-145236
by:

Direct replacement 628368



- LG-145236
by:

Product seems to be made of quality materials. Have not had the chance to use them yet as I am installing tonight. Ordered on Wednesday used the free shipping and received the next day. 669428



- LG-145236
by:

I installed the switch and ran the wires like the drawing showed and it works fine, goes up and down like it used to. Thanks, Will buy from again. Darrell . 650772



- LG-145236
by:

Installed new switch yesterday,exact match and easy to install. Product received in less than a week . E trailer is great a company and Crystal was very impressive to work with,knowledgable, polite and polite. She is an asset to your company. Will definitely use e trailer whenever needed ! 623199



- LG-145236
by:

Product recommended was perfect fit for my 2007 5th wheel. Fast shipping. All parts and hardware included. Easy installation to replace my existing landing gear, motor and switch. Great company to buy from. Thanks Etrailer 619535



- LG-145236
by:

Easy install works great fast delivery 617586



- LG-145236
by:

Replaced switch for jacks on front of fith wheel. Colored coded to match old switch which made it an easy change out. 603985



- LG-145236
by:

So far so good. Fifth wheel jack switch is working well. 592189



- LG-145236
by:

Heavy Duty wiring , everything you need to replace the jack switch on a 5th wheel rv 574287



- LG-145236
by:

I replaced a lesser quality switch with this one and could not believe the difference it made. It's as though the previous switch was not letting full electrical current through to the motor. Now the motor is quieter and appears to work easier. 564085



- LG-145236
by:

putting it on this morning ,perfict fit, thanks 545775



- LG-145236
by:

Bought these to run dual landing gear motors. Switch was pre wired for reverse polarity motors, making install easy. Fast shipping and well made. 501538



- LG-145236
by:

etrailer got my order late on a Friday, mailed it on Saturday and sent me tracking info. Great service. My landing gear was not a Stromberg Carlson, so I had to drill a couple of hole, shorten some really long wires, and reverse the wires to the motor, but it all worked fine and solved my problem. Very grateful for having it behind me in such a short time. 492541


Comments

Have not used it for about 3/4 of the past year, but assume that it still works fine. Thank you for your excellent service

Floyd - 04/04/2019

51456

- LG-145236
by:

Works perfect thank you very much good product 471223



- LG-145236
by:

Just what I need to make my project work. Thank You. 463024


Comments

The products that I purchased are fantastic and are doing the job that I wanted them to do. When I went to the local RV dealer he said “You Can’t Do That On Your RV “. I said “ Just Watch Me”. I put the parts on my RV and they work great. Thanks

Richard - 12/27/2018

48001

- LG-145236
by:

Perfect fit, works great. Great Company to deal with. 450888


Comments

Its been a year, and the switch is working great. No failures, or sticking. Id definitely buy from here again.

Tony B - 11/10/2018

45597

- LG-145236
by:

Haven't installed it yet... but appears to exactly match previous switch that I installed... now both jacks will be independently controlled. Fast service too! 425499



- LG-145236
by:

nice 375816



- LG-145236
by:

Easy installation, works great...better than the original switch. 370855



- LG-145236
by:

At the time I traded the 5th wheel in they were performing as advertised. 303168



- LG-145236
by:

Switch is exactly what I needed. I bought my fifth wheel camper used and the original owner must have added the power feature to the landing gear. He used a regular DPDT toggle switch and cobbled up a mount. Switch was not rated high enough for the max DC amps that the landing gear motor was rated for. I decided that I needed to install a proper landing gear switch kit and etrailer's experts answered my product question promptly as this was the only switch that was listed as weatherproof. I needed to install in existing switch location and did not have a switch compartment. Switch seems quality and is proper rated to handle the landing gear motor. Wires are heavy gauge also which I like. It seems that my landing gear travels faster than it did with the old switch and lighter gauge wiring. 293456


Comments

Works the way it should. Nice to not burn out an underrated switch twice a season. Has worked flawlessly for over a year. Rain or shine.

Matt W - 09/11/2017

28093

- LG-145236
by:

This hard wire harness worked perfect for the application and I was able to connect it in about 5 minutes 288002



- LG-145236
by:

Out of the box the item looks like a direct replacement for the bad switch. It was nice to see a wiring diagram included with the package. 264428



- LG-145236
by:

Fast shipping. Improved quality switch with instructions included. 208043


Comments

This switch is very well made and is superior to the OEM jack switch I replaced on my fifth wheel.

John F - 06/28/2016

18991

- LG-145236
by:

Top notch quality, and great service. These parts were used to upgrade a 5th wheel camper with manual crank for the landing legs. The motor fit perfectly my Atwood landing legs gear drive, and the switch was an easy install, with good directions on wiring install. They are working like a champ. Thak goodness, there will be no more manual cranking of the landing legs for me… ;) 188520



- LG-145236
by:

Replaced and working fine 145571



- LG-145236
by:

Excellent, Better Than The Original Equipment. etrailer.com is an exceptional place to buy parts, everything was as they advertised . service and delivery was very good. keep up the good work,nice to deal with you folk, will use in future. 106763


27
27

Ask the Experts about this Stromberg Carlson Accessories and Parts

Do you have a question about this Accessories and Part?


  • How to Run Wiring for Replacement Landing Gear Switch
  • If you are using either the Lippert Components Landing Gear Switch # LC145236 or the Stromberg Carlson Landing Gear Switch # LG-145236 you will connect the red wire without the fuse along with the longer black wire to the red and black wires on your motor. The short black wire will be run to the battery's negative post and grounded and the pink or red wire with the fuse will be connected to the battery's positive post.
    view full answer...

  • Is there a Way to Identify 5th Wheel Trailer Landing Gear with No Markings
  • It is possible that there is a part number somewhere that would help identify the landing gear on your trailer. Sometimes there is information on the underside of the caps on the tops of the jacks so that is another place you can check if you haven't already. Many landing gear parts are interchangeable among the different manufacturers but this is not always the case so identifying the manufacture and/or model number is important. Another option is to replace the landing gear with...
    view full answer...

  • Best Landing Gear Upgrade Options for 5th Wheel Trailer
  • We do have motors that you can add to your landing gear. For example, the Landing Gear Set # RVLG-8000 can be operated with the manual crank # RVLG-HDL but you can also add the motor # M1230 and switch # LG-145236 for effortless operation on your end. The next upgrade for landing gear is the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. This is rated for up to 12,000 lbs and operates via separate motors so you can easily level your 5th wheel trailer without using blocks like...
    view full answer...

  • Replacement Landing Gear Motor and Gear Box Needed for a 2004 Keystone Montana 2980
  • I do have a solution for you, but unfortunately manufacturers don't keep that kind of information on file. You could try using a replacement gearbox like part # RVLG-RDBOX and the compatible motor # M1230 that fits Ram jacks, but without knowing the manufacturer and part number it would just be a guess as to whether it is the correct part or not. What I recommend doing is going ahead and just replacing your whole landing gear setup. It might be getting close to time to do that anyways...
    view full answer...

  • Troubleshooting Older Venture Landing Gear and Motor Making Popping Sound
  • Thank you for all of the info! According to the part numbers you gave me you have Venture landing gear that uses a gearbox with the same dimensions as part # LG-179015. This gearbox is compatible with the Replacement Motor # LG-196308 which is rated for 6,500 lbs. If you need to replace the motor control switch then you will also need part # LG-145236. Attached are some dimensional photos of the replacement motor so you can use them to compare with what you currently have. Since your...
    view full answer...

  • Landing Gear Replacement Needed for 2010 K-Z Durango 1500 295BH
  • To replace the landing gear on your 2010 K-Z Durango 1500 295BH you will first need to take some measurements of where your weld stops are located. They should measure 15-1/2" on the inside and 17-1/2" to the outside which is a very standard measurement. If this is the case then I highly recommend the Landing Gear Set # RVLG-8000 because it is a cost-effective solution that has a total lift of 36-1/2" and is rated for 8,000 lbs. To use this system manually you need the hand crank # RVLG-HDL...
    view full answer...

  • Is the etrailer.com Landing Gear Set RVLG-8000 a Replacement Fit for a 1998 Sandpiper 5th Wheel
  • Our Landing Gear Set - 20-1/2" Travel - 8,000 lbs # RVLG-8000 has the weld stops in the standard dimensions where the inside measurement of the weld stops is 15-1/2 inches and the outside measurement is 17-1/2 inches (see attached picture). Since we do not have access to every trailer and RVs landing gear specs you will need to go measure where the weld stops are on your current landing gear. These should fit though since they use the standard weld stop locations. You have the option...
    view full answer...

  • Troubleshooting Landing Gear That Stopped Moving
  • If your landing gear is motorized, the motor works fine and the gear looks good you will want to test the switch; use a 12V battery to get power to the wire that signals the gear to extend. If it does extend with the 12V battery, the issue is the switch and the replacement you'd need is # LG-145236. However, if you have tried to manually operate the landing gear and cannot move it at all, then the unit would need to be replaced. For that you can use the Stromberg Carlson Electric Landing...
    view full answer...

  • Replacement Landing Gear Switch for Cougar 5th Wheel Trailer
  • We do have a nice selection of replacement landing gear switches available, such as the Replacement Switch # LG-145236 that you referenced, however they all include the wiring pigtail. This particular switch is designed for the Stromberg Carlson LG-1, LG-2, LG-3, and LG-4 Landing Gear Systems. Just let me know if you have a different model system and I will be happy to see if we have the correct replacement switch. I have also attached a short video demonstration on this switch that...
    view full answer...

  • Replacement Landing Gear for Ram RVLG-8000 on a 2003 Keystone Laredo 5th Wheel Trailer
  • We actually have the exact replacement for the Ram RVLG-8000 landing gear on your 2003 Keystone Laredo 5th wheel trailer! The Landing Gear Set # RVLG-8000 is what you are looking for. It has the exact same weight ratings and spacing between the weld-mounts. This landing gear comes with a gearbox but if you need to replace the manual crank, 12V motor, or need a switch, those parts are # RVLG-HDL, # M1230, and # LG-145236 respectively. Attached is a picture of the dimensions for the...
    view full answer...

  • Landing Gear Replacement for 2007 Keystone Cougar 29BHS
  • If your brackets are 2" tall then you most likely have the standard weld stop measurements of 15-1/2" inside to inside (see attached photo). With this being the case I recommend going with the Landing Gear Set # RVLG-8000 which has a weight rating of 8,000 lbs and offers 20-1/2" of travel. Since you have an older trailer I bet the weld stops have just been wedged in the mounting brackets which is why you are having a hard time finding them. This set comes with the gearbox and you can...
    view full answer...

  • Replacement Landing Gear Motor, Gear Box and Switch for Model 1A065012-02-01
  • The correct replacement motor is part # LG-142178, and the Replacement Aluminum Gearbox, # LG-179015. The correct replacement switch is the part # LG-145236.
    view full answer...

  • Replacement Motor For Stromberg Carlson Landing Gear 1A065012-02-01
  • The replacement motor you need is the Replacement Motor for Stromberg Carlson Electric Landing Gear, part # LG-142178. The replacement gearbox needed for this motor is part # LG-179015. If you need a switch for this motor, you can use part # LG-145236.
    view full answer...

  • Is it Possible to Add an Electric Motor to Landing Gear Jacks on a Horse Trailer
  • Sounds like you are looking for a motor to add to your existing landing gear to make them a powered landing gear set. I would have to know what brand of landing gear you have to know for sure what parts you would need. Lippert, Venture and Stromberg Carlson landing gear are the same like part # LC333966. This is a very popular set that can have a motor added to it. You would need the motor kit # LC142178 and switch kit # LG-145236. You can use the same gearbox that comes with the...
    view full answer...

  • Replacement Landing Gear Switch for Model Number 1A065012-02-01
  • The correct replacement switch for your electric landing gear model number 1A065012-02-01/1-065-041012-01 is the Stromberg Carlson Replacement Switch # LG-145236. The switch itself measures 2-1/4 inches long and 3-1/4 inches wide. The required mounting hardware is included. I have attached a short video demonstration on this product for you to check out.
    view full answer...

  • Recommended Replacement Landing Gear Set for a 2004 Keystone Cougar 5th Wheel Trailer
  • When you are looking for replacement landing gear the 2 big things to take into consideration are the weight of your trailer and the weld stop locations on your current setup. Since the GVWR of your 2004 Cougar is 10,300 lbs our Landing Gear Set w/ Handle # RVLG-8HDL that you referenced can handle the weight capacity of your RV. Keep in mind that some of the weight of your trailer is still supported by the axles and tires so a landing gear setup doesn't need to be rated for the total...
    view full answer...

  • Can a Motor Be Added to Lippert/Venture Landing Gear Jacks
  • My contact at Lippert Components confirmed that their manual landing gear # LC333966 can indeed be converted to powered operation later on through use of their motor kit # LC142178 and switch kit # LG-145236. You can use the same gearbox that comes with the manual landing gear. There would be no need to convert the follow leg to the shaft of a lead leg. Venture and Lippert landing gear brands are the same. If you are looking for a way to convert your landing to a dual motor...
    view full answer...

  • Where Do the Wires of the Landing Gear Switch # LG-145236 Run
  • I have included a picture that shows how the switch # LG-145236 will attach to the motor and battery. The switch pink wire will go to the positive battery terminal. Then there is a black wire for the ground that will go to the negative battery terminal and ground to the trailer frame. The red wire will attach to the red wire on the motor and the other black wire to the black wire on the motor.
    view full answer...

  • Replacement Landing Gear for a 1996 Sea Breeze 5th Wheel Trailer
  • If you take a look at the picture I have included you will see several measurements on a landing gear leg. If your existing landing gear jack legs match then it has the standard spacing so # RVLG-8000 with motor # M1230 is a great option that won't break the bank. If you also need to replace the switch use # LG-145236. If your legs have different measurements let me know what they are and I can determine if there is a better option.
    view full answer...

  • Replacement Switch for Stromberg Carlson Landing Gear System on Trailer
  • We do have a nice selection of replacement switches available for camper jacks and landing gear systems. If you have a Stromberg Carlson Electric Landing Gear System like what the Replacement Motor # LG-142178 you were looking at is designed to work with, the you can use the Replacement Switch # LG-145236. This particular switch can also be used with most other landing gear sets from Atwood, Venture, and Lippert. The switch is only available with the wiring included. I have attached...
    view full answer...

  • Troubleshooting Landing Gear Operating Backwards After Installing New Switch
  • If the landing gear controls on your trailer are now operating in the opposite direction after installing the Replacement Switch # LG-145236, it is indeed a simple case of miswiring with the wires between the switch and motor. Swapping the red and black wires to the motor (NOT the wires going to the battery) should resolve this issue.
    view full answer...

  • How to Choose the Correct Replacement Landing Gear for 5th Wheel Trailer
  • There are a few things that go into making sure you choose the correct replacement landing gear. First you need to be sure that the landing gear is rated properly. If you check out the weight rating on your current landing gear just make sure the replacement is rated for at least the same amount. The next step is making sure that the replacement landing gear has weld stops in the same locations as your current landing gear. This lets you replace the landing gear without having to do...
    view full answer...

  • Recommendation for Replacing Bevel Gears for Atwood Landing Gear or Replacing Entire Landing Gear
  • Since Atwood is no longer in the landing gear making business and you have an older 5th wheel trailer I recommend just replacing your entire landing gear set. This not only gives you peace of mind that everything is in good shape but it also makes tracking down replacement/repair parts in the future much easier. For your application I recommend the Landing Gear Set # RVLG-8000 which has up to a 36-1/2" lift and is rated for 8,000 lbs. This cost-effective option comes with the landing...
    view full answer...

  • Landing Gear Switch Installation and Wiring Diagram
  • The Replacement Switch for Stromberg Carlson Electric Landing Gear # LG-145236 has the wiring colors you specified and will connect in the manner shown in the attached photo. The pink will connect to the positive battery terminal. The short black will attach to the negative battery terminal. The long black will connect to one side of the motor and the red to the other side of the motor. These wires will change the direction the motor turns, so you will want to make sure they are connected...
    view full answer...

  • Recommended Dual-Motor Landing Gear To Replace Single Motor Landing Gear On Arctic Fox Fifth Wheel
  • With the measurements you said you have on your system the landing gear I recommend for you is the Stromberg Carlson Venture Landing Gear. You will need two of the lead legs, part # LG-177202, two gearboxes, part # LG-179015, two motors, part # LG-196308, and two switches for the landing gears, part # LG-145236. We do not have a dual-motor landing gear kit that would be a replacement for your landing gear.
    view full answer...

  • Motor and Switch Parts to Convert Landing Gear Set RVLG-8000 to Powered Operation
  • The gear box included in the etrailer Landing Gear Set # RVLG-8000 has pretty much standard dimensions, approximately 5-1/2-inches wide x 7-inches tall. It should fit in the same space as the original. The motor assembly that converts to a powered landing gear setup, part # M1230, bolts right up to the gearbox. The switch is NOT included with the motor but we offer part # LG-145236.
    view full answer...

  • Replacement Landing Gear Set for a 1991 Avalon 5th Wheel Trailer
  • To choose the correct replacement landing gear set you simply need to determine the spacing between the weld stops on your current landing gear set. The standard measurement is 15-1/2" inside to inside or 17-1/2" outside to outside. For this measurement I recommend the Landing Gear Set # RVLG-8000 because it gives you 36-1/2" of lift and is rated for 8,000 lbs. For this you can either use the manual hand crank # RVLG-HDL or the 12V DC Motor # M1230 and Switch # LG-145236 for operation. If...
    view full answer...


Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Sarah H
Installed by:
Jeff D
Updated by:
Shelly K
Updated by:
Hannah L

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.