bing tracking image
  1. Camper Jacks
  2. Lippert
  3. Leveling Jacks
  4. Stabilizer Jacks
  5. Fifth Wheel Camper
  6. Electric Jack
  7. Landing Gear
Lippert Landing Gear - Inside Mount - 5,000-lbs - 19-3/4" Travel - Power Jack
Lippert

Lippert Landing Gear - Inside Mount - 5,000-lbs - 19-3/4" Travel - Power Jack

Part Number: LC712690
$1,247.61
Camper Jacks
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
1-800-940-8924 to order Lippert camper jacks part number LC712690 or order online at etrailer.com. Free expert support on all Lippert products. Great prices and Fastest Shipping for Lippert Landing Gear - Inside Mount - 5,000-lbs - 19-3/4" Travel - Power Jack. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (56)
  • Q & A (0)
  • Videos (2)
  • Photos

Lippert Camper Jacks - LC712690

  • Leveling Jacks
  • Stabilizer Jacks
  • Fifth Wheel Camper
  • Electric Jack
  • Landing Gear
  • 4001 - 5000 lbs
  • Weld-On
  • 2 Jacks
  • 19-3/4 Inch Lift
  • Lippert
  • Steel


  • 5th-Wheel landing gear
  • 33-1/2" Inside mount
  • Capacity:
    • Total capacity: 5,000-lbs per leg
    • Single motor: 2,500-lbs per leg
  • Lift: 19-3/4"
  • Distance between weldstops:
    • 19-1/2" Inside of weldstop to inside of weldstop
    • 21-1/2" Outside of weldstop to outside of weldstop
  • Handle dimensions: 29-11/16" x 9-1/2"

Dimensions of handle

712690 Lippert Components Landing Gear - Inside Mount - 5,000-lbs - 19-3/4" Travel - Power Jack





Video of Lippert Landing Gear - Inside Mount - 5,000-lbs - 19-3/4" Travel - Power Jack

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for The Low-Down on the Lippert Landing Gear

John: Hey guys. John here from etrailer.com. And today we're going to take a look at the Lippert fifth wheel landing gear. It's rated for 5,000 pounds. It features a electric motor that's rated for 5,500 RPM. And it's going to have a 19-3/4 inch lift.

The Lippert 5,000 pound landing gear comes with two different configurations. One, with the weld stops located on the outside of the leg, and then also where the weld stops are located on the inside part of the leg. This is important to note where the location of the weld stops is, because depending on where your bracket is mounted on your fifth wheel, that's going to determine where you need that weld stop located.This is going to already be welded onto your frame of your fifth wheel. And then it's going to secure around your landing gear leg with the bolt. The outer tube is going to have a height here of 33-1/2 inches.

The weld stops here on the side, you're going to want to make sure that this measurement either from the inside to inside, or outside to outside, matches up with what you currently have on your fifth wheel. And for this landing gear that's going to be 19-1/2 inches inside the inside, or 21-1/2 inches outside to outside.This foot plate is a little bigger than normal, which is going to be really great for if our ground is a little soft, it helps to provide more stability. The total length is going to be eight inches, and the width here is going to be about five inches. One nice thing I'd like to point out about this, is that the foot that you can lower with the foot plate on it, you can actually tilt this or spin this plate, and secure it this way. So in case you're going to get more stability, better stability with the foot plate pointing that way as opposed to front and back.You can lower the inner leg here by removing this pin on the top.

This then allows the lower leg to come down. And you can read insert your pin, whatever height adjustment you need for where you're pulling your camper into. These are one inch increments here between the holes, so this makes it easier so you don't have to wait as long for when you're trying to level out your trailer. You can simply lower the leg. There is a quick release option here that we have at etrailer.com, that's spring loaded and allows you to lower the leg a lot quicker and not have to sit here and manually do it, and figure out where the pin's located.If you're going to be using this landing gear to replace your current electric landing gear, you'll simply tie in the two wires to your power and ground functions.

Otherwise, the kit does come with a control here. You have it retract and extend, which will raise and lower your foot. Four wiring connections here, two will be to your electric motor, two will be to your battery. And it does have a fuse here tied in to help protect your wiring.One of the nice things about this kit is that it does come with a manual override, which is going to be helpful for if you lose power to your landing gear. You're still going to be able to extend and retract the legs if need be. Simply put it on the shank here, and then you can rotate it to extend and retract the legs.Now this kit does come with four replacement mounting brackets, and the hardware to secure your landing gear to it. This is useful for if you're adding new landing gear to your RV, or maybe the mounting brackets that you have on there now are damaged somehow. So this bracket's going to be welded onto your trailer frame, and then it's either going to go above or below the weld stop here. And the bolt's just shouldn't go through the hole. And the nut's going to secure it on the other side.A similar option we have here at etrailer.com is the Stromberg Carlson LG-4. It has similar lift and dimensions, but it does have a higher weight capacity at 6,500 pounds per set. And it has a faster electric motor. In my opinion, I would go with the LG-4 because it's going to perform a little better and it's going to last a little longer. This is where your fifth wheel landing gear is going to be located up in your front storage compartment.As you can see, it's welded here to the side of the frame. When we're talking about motorized fifth wheel landing gear, you have two different options. One is a single motor application, which it looks like they have here. And that's going to be one motor on the side of it, which is going to operate both legs. And then you're going to have a dual motor application, which is going to operate the legs independently.One of the things you're going to need to also take note of on your fifth wheel landing gear, is the location of the weld stops, not just the measurement. So on this specific application, the weld stops are located on the outside of the leg itself. Sometimes you're going to need to have the weld stop located on the inside of the fifth wheel landing gear, and that just depends on what kind of space and room you have, and where it's mounted on your specific fifth wheel landing gear. That's going to do it for a look at the Lippert fifth wheel landing gear, rated for 5,000 pounds. Thanks for watching.


Customer Reviews

Lippert Landing Gear - Inside Mount - 5,000-lbs - 19-3/4" Travel - Power Jack - LC712690

Average Customer Rating:  4.6 out of 5 stars   (56 Customer Reviews)


by:

My fifth wheel landing gear needed replacement. One side would not work. No information on my unit. However, Rochelle of E-Trailers did research to determine a replacement unit. Was shipped to California in 3 days and I installed. Perfect fit !! Thank you Rochelle. Awesome Customer service and great quality.



by:

Received the Kit in about four days (5 Stars for etrailer). The shipping container was severely damaged (2 stars for UPS), but at least it arrived. Did not appear any parts were missing. I ordered this kit because it was less expensive for the complete kit then to replace both landing gear legs separately. I left the 5th wheel attached to the truck and removed the old landing gear, gearbox, and motor prior to the arrival of the new system. Keep all your parts. The new kit arrived and was very easy and straight forward to install. However the tubular steel expansion rod that connects both landing gear legs was too short. I had to use the my old connection rod. Also the spacer used for the inside of the large side of the connection rod was not included with the kit. Had to use the old spacer in the old connecting rod. I used my old landing gear foot plates and pull pins on both landing gear leg extensions. Once installed, the kit worked flawlessly. I placed red marker tape on the landing gear extensions so not to top out the legs when lifting. Again save all your old parts.



by:

I received my new landing gear, and it was what I expected. I have not installed it yet, but after putting a temporary fix on my old unit last year, I'm sure this unit will work. The packaging is not great, I actually thought the gear box that came with was used it was so dirty, but it has no installation marks on it, so I believe it's new. The trucking company used drove off my driveway cracking the edge of the asphalt, so I'm not real excited about that either. Other than those two things, it will work...



by:

New landing gear for my 2012 Cougar 5th wheel. Delivered on time (box was pretty beat up) all the parts were there and it was a perfect fit! Installed it myself in about 1 1/2 hours
Bonus, it was cheaper than at Amazon.
Highly recommend e
trailer !



by:

Installation was easy and it works really well product was worth every penny



by:

Super helpful, absolutely. A pleasure to work with will definitely order the rest of my parts through them and nobody else respond time. Was immediately to help me fix the problem and explain it to me. Couldn't ask for better customer service and a company that cares about what you think of the product that they say which was high quality. Honestly got to say they were pleasure and easy to work with I'm 60. Sometimes you can be a little tough using emails. And they actually took the time to call me and talk to me in person and help me throw it so thanks to their team.



by:

This was just what I needed. The legs work perfectly. The only reason I gave 4 stars instead of 5, there were pieces missing from the shipment and I had to purchase the missing items from a local hardware store. Also one gear box was locked up and I had to take it apart to find a piece of a wire tie inside blocking the gears. Once the piece of plastic was removed works like a charm. The fast delivery makes up for the slight inconvenience. The legs are holding my 5th wheel up with pride.



by:

Package was very heavy. It was so heavy that ups damaged the box and lost some of the hardware.This should have been sent in at least 2 boxes from the weight of this item.



by:

I installed the jacks on my 23 ft. 5th wheel trailer, which was very simple and ran the electric wires direct to my battery compartment. The jacks work fine but are a bit too noisy for my liking. Not sure if all are this noisy but they do the job.



by:

Fit our 2021 Forrest river shockwave Toyhauler perfect



by:

Haven't installed it yet but seems to be well made



by:

The shipment arrived in good shape and is working well. I will recommend you.



by:

This landing gear has worked great. Unfortunately it was a bigger job than we were willing to undertake but luckily found a mobile repair service to install it for us. We have had no problems since then.



by:

Great replacement of landing gear that was no longer working correctly on our ole trailer. Was a pretty simple replacement once logistics of supporting trailer and accessing with generator compartment partially in the way. I no longer have the fear of be able to re-hitch if I need to lower for leveling purposes. Thanks etrailer you guys have been great with all my DIY trailer projects.



by:

I am very impressed with this Landing Gear, it is twice that of the Original equipment, in quality.



by:

Parts came in as expected. The box was pretty tore up but everything was there. Sheila was amazing and very helpful.



by:

I really can't say a lot about the product quality at this time since I just got it installed. It was (I believe) drop shipped to me from the factory. When I received and installed the land gear assembly it kept binding regardless of if I was raising or lower the landing gear rendering it unusable. I contacted the folks at etrailer and was helped by their technician Wayne H. With his help we were able to discover the problem and that was that the factory sent me two leading landing gear legs instead of a (1) leading leg and one following leg. etrailer sent me a replacement following landing gear leg and I installed it today. Once again the electric landing gears on my 5th wheel worked just like they did when the trailer was new. I will definitely be doing business with etrailer in the future and do recommend them to anyone needing parts for a trailer.



by:

It took about a week for me to receive the landing gear. I paid extra for express delivery although I actually received a day later than they said I would by regular delivery. The box was torn up and I was missing some parts but made it work by using some of my old parts. Other than that, everything was okay……at least it fit.



by:

Had some issues with the mounting brackets that were in the trailer. We didn't use the brackets that came with the kit as that would have involved cutting out the old brackets and welding in the brackets that came with the kit. We were able to get the legs installed with minimal effort and the rest of the installation went without any other issues.



by:

Parts arrived promptly and in good condition. Tracking kept us informed about delivery so we could still enjoy camping. Phone assistance was knowledgeable and concise. Will continue to ship etrailer. Thanks!



by:

Purchased for my 2010 Keystone Montana Mountaineer 285 RLD. The original Jack Leg collapsed. I ordered this set to replace the complete Jack Leg System. I upgraded the capacity for added assurance and they fit perfectly. The system runs a little bit slower than the original but that is caused by the different gear ratio for the increased capacity. A few extra seconds of time is an easy trade off for the increased capacity security. A great product from a great company.



by:

The landing gear worked perfectly as a direct replacement to my existing landing gear. One of the legs of the existing landing gear had failed so I decided to replace the entire unit. Everything worked great. Although it wasn’t very difficult to figure out how things were to be put together, there were no installation instructions. It took about two hours of wrench time plus an hour of unpacking, setup, and clean up to replace the entire unit.



by:

Receved order on time and everything went well during reassembly. Thanks for helpjng me get all the right parts



by:

Everything was great flawless installat ion



by:

Not a hard project for someone younger than me. It seems to work and interchange with the old one. I have yet to try the hand crank. I had to jack trailer up in order to work on it with floor jack and blocks. I'm not sure if the hand crank would pick it up. However, I am happy with the product and will get it a full blown test in June 2020 to see if it holds up. I don't expect any problems.


25
56
Show More Reviews

See what our Experts say about this Lippert Camper Jacks

Do you have a question about this Camper Jack?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Video Edited:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Jameson C
Expert Research:
Jameson C
Employee Randy B
Installed by:
Randy B
Employee Shelly K
Written by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924