Replacement Landing Gear for 2018 Jayco Eagle HT27.5

Question

Question:

Hi, I am in need for new front landing gear for my 2018 Jayco Eagle HT 27.5 and was wondering if your Item # LG-1 is a direct fit. Cheers

asked by: Justin H

0

Expert Reply:

Yes the Stromberg Carlson Landing Gear Set part # LG-1 is a confirmed fit for your 2018 Jayco Eagle HT27.5 for a powered landing gear solution.

expert reply by: Jameson C

0

Answer 1

Thanks for providing me the landing gear motor and gear model number 1A065012-02-03 on your 2011 Big Country 3250. Yes you can use other replacement parts. Part #LG-142178 is a replacement motor for Stromberg Carlson electric landing gear, but it…

view full answer...

Answer 2

Based on the model numbers you provided, it appears that you currently have the Lippert 3.0 Electric Leveling System installed on your trailer. For a replacement motor, you will just need the Lippert Replacement Motor #LC343758. This will serve as an…

view full answer...

Answer 3

It sounds like you need the replacement leg for the left side of your landing gear on your 2003 Jayco 5th wheel trailer. Atwood has been bought out and the parts are being switched to Lippert. If you need the drive leg(the one with the crank or motor…

view full answer...

Answer 4

I have an answer for you. Unfortunately, we do not sell replacement components you need as a complete set. They have to be purchased individually. Although, we do carry all those parts. Here are the replacements you need: - Replacement Heavy-Duty…

view full answer...

Answer 5

I can certainly understand wanting to look for a more cost effective alternative but the motor and gear box for the Lippert Ground Control Leveling Systems are sold as one unit. The correct motor and gear box for your Lippert Ground Control 2.0…

view full answer...

Answer 6

Hey Kim! The Replacement Motor with Clutch for Lippert Ground Control 2.0 Electric Leveling System #LC241795 is the correct replacement motor for your Jayco landing gear. If you take a look at the picture below you can see the same model…

view full answer...

Answer 7

For your Jayco 5th Wheel I recommend product #LG-142178 which is manufacturer matched as the correct replacement while also offering the 5,500 lb weight capacity you were looking for.

view full answer...

Answer 8

The correct replacement motor is part #LG-142178, and the Replacement Aluminum Gearbox, #LG-179015. The correct replacement switch is the part #LG-145236.

view full answer...

Answer 9

When replacing your landing gear motor like #LC241795, the trailer can be supported by your landing gear legs. You do not need a second set of jacks or jack stands. With the motor removed, the gear box will not turn to allow the legs to drop. I have…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Appreciate you reaching out Juan! Lippert confirmed that your LCI number is a 1621 pin box. Rota-Flex 5th Wheel Pin Box #LC328330 is going to be a direct replacement and bolts right on. The Rota-Flex pin box is highly rated because it has a pivoting…

view full answer...

Replacement Landing Gear for 2018 Jayco Eagle HT27.5

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching