1. Home
2. RV & Camper
3. Camper Jacks
4. Landing Gearx

Hello, and thanks for getting in touch. The etrailer Electric Trailer Jacks #e55ZV and #e23ZV will hold up just fine in cold weather. The housing is designed to be water/weather resistant. It even has a manual backup option if you were to lose power…

Hello Izzy, thanks for reaching out. The necessary installation hardware will be included with the etrailer Electric Trailer Jacks like parts #e55ZV and #e23ZV. You can see the hardware pictured below. It is just 3 bolts that hold the A-frame jack to…

...Looking to upgrade the landing gear on my 5th wheel trailer. Right now I just have a hand crank but I have seen people with motors and a switch. What kind of upgrades are there for landing gear...

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

Hello Jeremy, Yes, our etrailer jack #e55ZV will automatically stop and not over raise. If you check out the video that I attached you will see that Steven still has his finger pushing down the button after the jack stops. What kind of application…

Hello Jeremiah, Great question. The great thing about our etrailer jack #e23ZV is that it comes with a Limited Lifetime Warranty! Yes, you read that correctly. If the jack ever breaks down due to a manufacturer defect, we will replace the jack. We…

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

...I need a landing leg jack for a 2003 Jayco eagle fifth wheel 26.3 model 251RLS .The jack is an Atwood. May be part 71486 or 71488. The outer sleeve is 2.5 OD x 2.25 ID 37 3/4 long. Inner sleeve 2.25...

Hello Jesus, You won't have to worry about that with our etrailer Electric Trailer Jack #e55ZV as it comes with a limited lifetime warranty. So if the jack ever breaks because of a manufacturer defect we will replace it. What kind of trailer will…

...Needing to replace the landing gear on my 5th wheel trailer but not sure what to order. How do I know I am getting the correct replacement part...

Hello John, I was not able to find that information anywhere, luckily we have one on a trailer right outside. From the top of the mounting plate to the top of the jack is 20 1/4". What kind of trailer were you thinking about putting this on?

...I have a 1996 Carri-lite, Atwood landing gear. One of the landing legs the one on same side as motor-lead leg has stripped out gears and possibly the acme screw/worm screw is not good has wobble...

Hello, and thanks for getting in touch. The etrailer Electric Trailer Jacks #e55ZV and #e23ZV will hold up just fine in cold weather. The housing is designed to be water/weather resistant. It even has a manual backup option if you were to lose power…

Hello Izzy, thanks for reaching out. The necessary installation hardware will be included with the etrailer Electric Trailer Jacks like parts #e55ZV and #e23ZV. You can see the hardware pictured below. It is just 3 bolts that hold the A-frame jack to…

...Looking to upgrade the landing gear on my 5th wheel trailer. Right now I just have a hand crank but I have seen people with motors and a switch. What kind of upgrades are there for landing gear...

We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer jacks. I'm…

Hello Jeremy, Yes, our etrailer jack #e55ZV will automatically stop and not over raise. If you check out the video that I attached you will see that Steven still has his finger pushing down the button after the jack stops. What kind of application…

Hello Jeremiah, Great question. The great thing about our etrailer jack #e23ZV is that it comes with a Limited Lifetime Warranty! Yes, you read that correctly. If the jack ever breaks down due to a manufacturer defect, we will replace the jack. We…

The correct replacement for your 1-065-041012-01 motor is part #LC141893 from Lippert. Your original motor had a 7140 rpm speed. The Stromberg-Carlson #LG-196308 you specified has a 5430 rpm output, so it wouldn't be a good choice. You'll…

...I need a landing leg jack for a 2003 Jayco eagle fifth wheel 26.3 model 251RLS .The jack is an Atwood. May be part 71486 or 71488. The outer sleeve is 2.5 OD x 2.25 ID 37 3/4 long. Inner sleeve 2.25...

Hello Jesus, You won't have to worry about that with our etrailer Electric Trailer Jack #e55ZV as it comes with a limited lifetime warranty. So if the jack ever breaks because of a manufacturer defect we will replace it. What kind of trailer will…

...Needing to replace the landing gear on my 5th wheel trailer but not sure what to order. How do I know I am getting the correct replacement part...

Hello John, I was not able to find that information anywhere, luckily we have one on a trailer right outside. From the top of the mounting plate to the top of the jack is 20 1/4". What kind of trailer were you thinking about putting this on?

...I have a 1996 Carri-lite, Atwood landing gear. One of the landing legs the one on same side as motor-lead leg has stripped out gears and possibly the acme screw/worm screw is not good has wobble...