Replacement Landing Gear and Equalizers for a 2008 Keystone Cougar 5th Wheel
Updated 08/04/2022 | Published 08/02/2022 >
Products Featured in This Question
Question:
Looking for both landing legs on a 2008 cougar 5th wheel inside bolt collar is stripped Also need to replace double axle middle leaf spring connector
asked by: Pierre P
Expert Reply:
Thanks for the pictures! Based on the weight of your 2008 Keystone Cougar 5th Wheel, you will want the item # LG-1 landing gear set. You are going to want to measure to be sure this is the right size for you. The two things you will want to measure will be the distance of the black outer tube of the jack and the distance between the frame clamps (this measurement can differ depending on where the weld stops are located). You'lll need to measure from the underside of top bracket to top of lower bracket as shown in the diagram. I have linked two diagrams for your convenience. If your Keystone 5th wheel matches either one of these diagrams then the item # LG-1 will be a work on your trailer. If the landing gear on your trailer has different dimensions, email me back with those and any stickers that show part numbers or manufacturers and I will find you the right set.
To replace the equalizers on your Keystone Cougar you will need to determine which kit is right for you. You will want to measure the distance across the equalizer and use item # K71-449-00 for 7-3/4" long, item # K71-448-00 for 6" long, or item # K71-359-00 for 5-3/4" long. I have included a picture of the 7-3/4" equalizer showing where to measure.
Product Page this Question was Asked From
5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 6000 lbs
- 1-3/4 Inch Wide
- 5 Leaf
- 25-1/4 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Search Results: trailer suspension parts
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Search Results: trailer leaf springs
- Search Results: trailer wiring
- Search Results: equalizers
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
- Search Results: spring shackles
- Search Results: shackle links trailer suspension parts
- Search Results: shackle link
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Curved Equalizer for 1-3/4" Double Eye Spring - 7-3/4" Long - 9/16" Hole
- Shop: TowSmart 4-Wire Y-Harness Connector - Trailer End - 25' Ground
- Q&A: What Is The Difference Between TREQE1 And A2252CB-GALV?
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Dexter Heavy Duty Suspension Kit For 7-3/4" Wide Equalizer
- Video: What to Know About the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Video: Review of Dexter Trailer Bearings Races Seals Caps - Bearing Kit 3500LB Axle - DX76ER
- Q&A: Should Trailer Suspension Bolts be Torqued Down
- Video: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers Review
- Article: Thank you!
- Video: Comprehensive Review: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers
- Shop: Trailer Hitch
- Article: Double-Eye Trailer Suspension System Review
- Shop: RV Covers
- Q&A: Suspension Upgrades For A 2011 Keystone Cougar 5th Wheel Trailer
- Q&A: Replacement 26" Leaf Spring Recommendation for 6K Axles on a 2017 Jayco Eagle
- Q&A: Replacement Landing Gear Legs Needed for a 2004 Arctic Fox 29.5E 5th Wheel Trailer
- Q&A: Is 34" Axle Spacing Okay for the Dexter Axle Suspension Kit # K71-360-00






