Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.
Features:
Specs:
Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the square two-speed manual landing gear set. Now, this landing gear set lets you raise and lower your trailer quickly and easily. It's a complete weld-on installation, so this is going to weld directly onto your trailer. The unit's going to feature a two-gear set up, so you're going to have a low gear that's going to offer full lifting power and then you're going to have a high gear that allows you to operate the jacks at a faster pace or a faster operation. Now, this set is ideal for standard agricultural, construction and industrial trailer applications. You'll notice that it has the traditional gear box design on it that does require you to reposition the crank handle to switch between the gears.
Each jack is going to feature the drop legs with the spring return. That's going to increase overall extension for maximum adjustability. Spring return is simply you pull out this lever here, it's just a plunger pin, and the drop leg will return automatically. It's on a spring. And so you gotta watch out, stay clear of that.
Make sure you don't get anything caught in there, because these are heavy duty industrial grade. They're very strong and durable. That foot plate that's attached to the drop leg, that's really going to help spread out the applied weight, especially on softer surfaces to help prevent sinking. But again, those drop legs really help increase overall extension for maximum amount of adjustability. The plunger pins are positioned to the sides of the units. That's going to allow for much easier access.
The unit is made from a complete, just sturdy steel construction, has nice black powder-coated finishing over the whole unit. It's going to do a great job at resisting rust and corrosion. Again, weld-on installation to the trailer frame. Those foot plates are a nice round design. They're going to have a diameter of 9 7/8 of an inch.
I also want to point out that on each jack, as well as the gear box, you're going to have built in grease zerks. Those are going to allow for easy maintenance, so you can attach a grease gun to it, pump in the grease, it's going to lubricate the internal components and keep everything working as it should, which is going to help increase the overall lifespan of this landing gear set. You'll also notice that it comes with a handle. It's going to come with attachment hardware. You can swing that up when you're ready to use it. It's also going to come with your connecting rod, that's this piece right here. Nice durable design, steel construction, black powder-coated finish on there as well. And you're going to get all the necessary hardware to get everything attached where it needs to go. Now, because that connecting rod is so long, I actually couldn't fit it in for this video, but I did put it all together. I took some measurements that will hopefully be helpful to you. That connecting rod has an overall length, end to end, of 65 1/4 inches. You'll notice that the mount holes on that are elongated. Center of one mount hole going to the other end to the center of the other mount hole measures around 61 1/8 of an inch. So again, I put it together and with the rod attached to the jacks, the distance between the jacks from body to body was going to be between 69 1/4 inches to 72 inches. Now, this landing gear set is going to feature a lift capacity of 50,000 pounds, 25,000 pounds per jack. The overall height, not including the drop leg but with it in the fully retracted position is 30 inches, fully extended, again not including the drop leg is 43 inches. So this unit gives us a travel or lift of 13 inches, the height from the bottom of the foot plate to the closest point of the outer tube when fully retracted is 5 inches, fully extended is 18 inches. The drop leg is going to provide an additional 11 1/2 inches of travel. Each drop leg has four adjustment holes on it and those holes are separated on center by about four inches, so that's going to be your incremental height adjustment. Again, you got the plunger pins here on the side, a nice large handle. You can pull that out, rotate it. It's got a horizontal and vertical indention, so that way it holds that plunger pin handle in the position that you want it to be in while you're operating the unit. Now the outer tube is a square design, measures 4 3/8 of an inch by 4 3/8 of an inch. Inner tube, square design, 4 inches by 4 inches. Outer tube length from bottom to top 25 inches long. That's going to do it for today's look at the square two-speed manual landing gear set.
Average Customer Rating: 4.7 out of 5 stars (603 Customer Reviews)
Pull the side-facing plunger pins on these heavy-duty jacks to release the drop legs for an extra 8" of lift. Retracted height is 8-1/4" and extended height is 18". Get maximum lifting power in low gear and fast cranking in high gear.Appears to be good quality. Fit in the existing mounts. Drop leg is a bonus over what was previous.
The product itself was great. It fit right in to the brackets from our old landing gear. We were able to use our existing motor as a cross fit with this gear. The gear box was even better than Lipperts as it was not plastic.
The only issue we had with this was shipping. We ordered the part same day as our water pump because we were told it was in stock. Low and behold they changed ship date numerous times, with the excuse it was not easy to pick. Anyhow, two weeks later we finally got the part we ordered.
I have a 2000 komfort 26FS. It has original landing gear that was made by Atwood.Parts to repair are apparently no longer available. Did alot of research and this kit seemed to be a good replacement. It is a exact replacement. Took some time to get it installed as my 5th wheel has a wall and frame right next to landing gear. Original motor bolted up with replacement of original screws which were half inch to short. Four days to get delivered to Oregon. I would have given a five star review but I was missing square tubing that runs from gear box to other leg. Tubing is clearly pictured in discription photos.
Installation went smooth, hardest part was troubleshooting the old landing gear. This was an exact replacement for our O.E.M. landing gear which had stripped out the bolt. Great price, fast shipping, very satisfied.
Landing gear fit perfect on my 2011 Rockwood fifth wheel. I was even able to use my original motor.
The fifth star is for the fantastic etrailer Customer Service Team! They are always helpful with questions and guidance. I have a 1998 Terry 5th wheel, and this gear was practically a direct fit. The gearbox mounts either horizontally or vertically, the legs feel heavy duty and appear powder coated; they function smoothly. The feet, handle, and clips are all quality pieces. Sadly, the telescopic cross bar between the legs wasn’t coated and mine was rusty. Also, the gearbox was loose, bouncing around with the heavy metal parts in the manufacturer’s box, chipping the gearbox. All in all, I am very happy with the functionality/price. Plus, now when I get a little older, I have the option of adding the electric motor. Again, thx to Customer Service.
Great looking product. Looks to be HD.works as it should. But the grease fitting was blocked by the manual crank rod. Crossover shaft bolt hole was to far in and had to cut the plastic wedge spacer to fit. Crossover shaft is bare metal and will need to be painted.
I ordered this on Tuesday was delivered on Thursday at 4 pm and installed by 6 pm. Your service is fantastic
Thank you for a great customer experience
Thanks
Jerry
This was easier to install then I expected and it has worked flawlessly for a year. Runs slow but has plenty of torque to easily raise and lower my trailer even when it's just plugged into the truck without the trailer battery.
IMO it was a good value.
This landing gear worked well with my 5th wheel trailer. I had to do a little bit of grinding to get them to set correctly but nothing too bad. Shipping was very fast and I spoke with 3 different people to get info and everyone of them were really nice and helpful. Will be definitely ordering from here again!
Customer service and timely delivery were excellent! I would recommend etrailer.com to anyone.
Ordered on Tuesday, shipped on Tuesday, received on Thursday. Installed in 2.5 hours by myself on Sunday. These were actually a replacement set for landing gear that has skipping gears and a short throw. They bolted right in and work perfect. I would attach pictures but the landing gear is recessed into the 5th wheel trailer so it would be unclimactic.
Landing legs appear to be ok quality. I did find legs and gear box was lacking sufficient amount of grease so be sure to check before installing them. Gear box had to be taken apart and most moving parts were metal to metal so I grease it and it’s quiet and smooth now. Install was easy and after greasing should last as long as the 17 1/2 year old ones that were well maintained.
My fifth wheel landing gear arrived two days early. And William S.answered all my questions.great experience
Perfect replacement, works great, excellent shipping time and service. Just wish I had got the electric motor that goes with the legs.
WAS NOT I EXPECTED TO GET LEGS TO SHORT SO LEFT IS TO LOW FOR MY TRUCK WITH OUT BLOCKS CONNECTING ROD BETWEEN JACKS 2 FT TO SHORT WAS NOT A GOOD FIT FOR TRAILER DID NOT KNOW UNTIL INSTALLED THEN IT WAS TO LATE AS I WAS TOLD TO LATE FOR ANY THING TO BE DONE FOR WE LAST TIME TO ORDER FROM ETRAILER
2 day delivery and the best order tracking I've seen make for a great start. Follow up after delivery of the product is not unheard of but very nice. When you open the box and everything you ordered is in the box is reassuring, but when you remove the jacks and the accompanying hardware and it fits, totally thrilled! Reused the motor from the old jacks and everything works perfectly!
Ordered this from etrailer instead of other sites as I knew the shipping would be faster. Sure enough I got the item in 4 days on Thursday and Installed it on Sunday. Very quick and easy. Took longer to get all my tools and set up items together than the actual work. The item was a exact fit with installation being feeding the legs through the holes in the floor down from the inside and installing the 4 clamping bolts to hold them in, the gear box on the lead leg and the cross bar and motor. Now it purrs like a kitten when activated instead of clanking and creaking and blowing fuses. Actual install time was probably 1.5 hours taking my time and injecting extra grease into the gears and lead screw. These replacement units have a grease fitting for both which is great and should allow them to last forever! Being a safety freak I used a 3 ton jack with a 4X6 placed long ways to catch the I beams under the trailer then placed 3 ton car jacks under the frame also and for extra safety backed my truck bed under the tongue for extra security while I worked. The price was crazy great, the fit was excellent and the shipping was fast as usual. less money in parts and 2 hours of work probably easily saved me a grand over taking it to a RV repair shop! Thanks etrailer. Saved me again!
My old jacks went bad after 3 years and 10 uses these replace and fit perfectly used this weekend and much more sturdy and lifted up the front of the 5th wheel much better.
Well it happened while out enjoying the AZ mints. My landing gear quit working. Returned home in time, to rebuild my landing gear. I got on line, checked etrailer.com, they had the landing gear that fits 90% of all 5th wheels. I purchased the set, arrived a day early, all the parts were complete in the box. It was a perfect fit, so easy to install. I greased all the gears, even the crank box gears, painted the cross bar.
This was my first time installing a replacement pair of jacks on a 30' Excel gooseneck trailer, it was intuitive and straight forward. Was unable to figure out how to mount up my existing Atwood electric motor to operate this gear head but will deal with that after a job I need to use this for.
Exact replacement for half, (or less), than factory cost. Fixed uneven landing gear, one broken foot.
I got the wrong jacks and I am missin so many parts
Since I was told this was made in China, I was afraid the quality of the metal would be poor, but they are heavy and sturdy.
For the price I highly recommend this landing gear set.
I ordered the part Wednesday night and after seeing the express shipping cost I thought no just going to do the regular free shipping and when it gets here it does. Well it was here by Saturday! I am very please with the speed in which my order was handled and how quick it arrived. The parts themselves are very sturdy and were an exact replacement for what I needed.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.