bing tracking image
  1. Camper Jacks
  2. Stromberg Carlson
  3. Fifth Wheel Camper
  4. Leveling Jacks
  5. Stabilizer Jacks
  6. Landing Gear
  7. Sidewind Jack
Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs

Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs

Item # LG-183708
Our Price: $517.16
You Save: $105.81
Camper Jacks
Shipping Weight: 71 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos


Need help with installation?
Locate installers near me
Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity of set is 8,000 lbs. 1-800-940-8924 to order Stromberg Carlson camper jacks part number LG-183708 or order online at Free expert support on all Stromberg Carlson products. Great prices and Fastest Shipping for Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs. Camper Jacks reviews from real customers.
  • All Info
  • Reviews (53)
  • Q & A (0)
  • Photos

Stromberg Carlson Camper Jacks - LG-183708

  • Fifth Wheel Camper
  • Leveling Jacks
  • Stabilizer Jacks
  • Landing Gear
  • Sidewind Jack
  • 7001 - 8000 lbs
  • 2 Jacks
  • 35 Inch Lift
  • Stromberg Carlson
  • Weld-On
  • Steel

Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity of set is 8,000 lbs.


  • Perfect for raising, leveling, and supporting your 5th-wheel trailer or RV
  • Manual lift with included crank is easy and quick
    • Motor and switch kit (LG-217884 - sold separately) can be added to eliminate manual cranking
  • Drop legs minimize jacking time and help to level the trailer on uneven ground
    • Legs adjust in 1" increments
  • Cage pins included to release drop legs
    • Upgrade to spring-loaded pull pins (LG-119113 - sold separately) for simpler drop leg release
  • Heavy-duty steel construction
  • Gearbox housed in a corrosion-resistant aluminum body
  • Landing gear welds onto trailer frame
  • Set includes 2 jacks, gearbox, hand crank, footplates, cross shaft, and hardware
  • Made in the USA


  • Leg length: 29-1/2"
  • Total lift: 34-7/8"
    • Travel: 19-7/8"
    • Drop leg: 15"
  • Combined weight capacity: 8,000 lbs
  • Cross shaft length: 41" - 71"
  • Overall dimensions: 32-3/4" tall x 2-1/2" wide
  • Distance between weldstops:
    • Inside to inside: 15-1/2"
    • Outside to outside: 17-1/2"
  • Footplate dimensions: 8" long x 5" wide x 2" tall
  • 1-Year warranty

Dimensions between weld stops

Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.

Convenience is a hallmark of this landing gear from Stromberg Carlson. An inner drop leg on each jack makes leveling easy by allowing the jack feet to reach the ground quickly and at varying heights. The cage pins that secure the drop legs can be replaced with spring-loaded pull pins (LG-119113 - sold separately) that allow for single-handed operation. Large, rectangular, pivoting footpads are included, but you can use larger, 9-inch-diameter pads (LG-210475 - sold separately) instead if you often camp on soft ground.

This system and its parts were designed to be compatible with most of the other fifth-wheel landing gear on the market, including Atwood and Lippert. If you're replacing your old landing gear, you can install this set from Stromberg Carlson using your existing mounting hardware.

LG-183708 Stromberg Carlson Manual Landing Gear for Fifth Wheel

Installation Details LG-183708 Installation instructions

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs - LG-183708

Average Customer Rating:  4.8 out of 5 stars   (53 Customer Reviews)

Manual landing gear lets you jack up your fifth-wheel trailer quickly and easily. Each leg is 29-1/2" tall, offers 19-7/8" of travel, and has a 15" drop leg for extra lift. Combined weight capacity of set is 8,000 lbs.


Fairly easy install on my 1996 Coachman Catalina Lite 23RB 5th wheel. I had to do
a little grinding on one side to make the leading leg fit. I am pleased with the installation and glad to have a working good set of landing gear. The price was great compared to what a local RV dealer wanted for the same landing gear. I saved a few hundred dollars on the landing gear. etrailer was great to work with in finding the right landing gear that would work with my 5th wheel.


I got my legs they are on it is so nice not to have to jack the front of my fifth wheel up with two 20 ton bottleneck jacks now I just push the button the legs go up the legs go down it is amazing and Adam was wonderful he helped me out so much with getting my legs will tell all my RV people great place and awesome people very helpful.



Love them working perfect


Disappointed the replacement landing gear did not have grease fittings as the previous units did. I had to drill and tap each leg in two critical locations that need to be greased periodically. And the amount of grease on the jack screw and pinion gears was minimal at best.

The new gear box was the same. I opened it up to see if it had adequate grease, again minimal. I packed it by hand then reassembled.


Very helpful folks, easy installation. Great product. It does what they said it would do. Would definitely purchase this landing gear set from these folks again. Thank you!





This landing gear is a great replacement for my 25 year old unknown make landing gear. I did have to relocate the mounts in order to accommodate the manual crank feature ( a feature I have never had to use, but take comfort in knowing it's available if the need arises.) The kit was so complete it was not hard to relocate them, up 3/4" and back 1/4". As long as I was welding, I was able to fabricate a mount for my existing motor, allowing me to continue "crankless operation."
My only complaint was the directions regarding the plastic spacer that holds the gear box in place. The directions stated the spacer was on the lead leg's "rotor", with no explanation of what the rotor is. I would have called it the "input shaft," or better yet provided a photo. The directions said to see the photo below, but there was no such photo below. The only photo related to the spacer was a postage stamp sized image which was too small to glean any detail from. I found the spacer in the hardware bag, along with a self-tapping screw that aligned with the hole in the "rotor" and figured out how to install the spacer. It's taking longer for me to type this than it did to figure it out, but it should have been clearer.
I'm about to run out of room, so in summation, It's a GREAT product!



It works much better than the original ever did.


Outstanding Performance


Can't thank everyone @ etrailer enough for all the help I received and the service I got from Teresa J and Courtney B. They were extremely kind and gave me the information I needed to make a wise choice.. The new landing gear I purchased fits and works great. etrailer has definitely earned my business in the future!!!



Works great.. A little short, but the only replacement available without relocating the weld stops. I really appreciate all the help I received from etrailer..


Lisa really helped with selecting a set of landing gear with the correct weld stop spacing for my application. She found me a heavier set than oem that fit perfectly and worked with my power drive. I have always been impressed with the customer service I receive from etrailer.

Daniel O.


Still working great


Works Great was easy to install as it almost fit in place of old system. Had to modify one clamp.

Norm A.


Jacks are still working fine.


After stripping the gears out of the landing gear on my 5th wheel camper, I went online and found out that Atwood no longer supplies jacks for campers. I contacted Etrailer Corp. and they found replacement jacks for me. When the new jacks arrived, they bolted up easily and everything fit as it was supposed to. Etrailer was very nice to work with, shipped the product very quickly, and is an excellent vendor. Thank you.


Fast delivery and just as pictured on their site. Needed a front trailer jack for my 5th wheel and they had just what I needed. Very polite on the phone and very helpful. Was very easy to install even for an old man that is not to good with things like this.


Product arrived on time, the Lift is the exact same for my 1998 Prowler 5th wheel.
Easy to install instructions Thanks etrailer


The Stromberg Carlson manual landing gear that I ordered arrived on time and as advertised. Within an hour I had the old landing gear removed and new one installed. It worked great and matched up perfectly with our existing motor. No photo was taken due to the limited view. The salesperson was great to work with...


Went in pretty easy. Took about 2 1/2 hours. I was able to use my existing mounts but one of the mounts was off just enough to make me cus. After a little grinding everything went together pretty easy. I would suggest replacing the carriage bolt nuts with locking nuts.


These jacks were a replacement for factory jacks on my 2004 Montanna mod 3575RL . The landing gear fit perfectly with no hassles , and for an 80 year old man easy to install . They have so far , worked perfectly .


I was able to install new landing gear within an hour. The electric mother fit right on the assembly and everything works great.


These were used on my 1997 travel trailer. They are considerably stronger than the set I removed and bolted direct into the original mounts. Would definitely recommend to anyone needing a replacement set.


Arrived a day early i installed it in 20min it was a perfect fit and fit and operated great. Very knowledgeable service and better tha original parts at great price.I would recommend etrailer for anyone needing parts for rv repairs.


I called and talked to Jennifer S. on Monday, She was very helpful and her knowledge of the product was great. She helped me order the correct landing gear and I received it on Wednesday. I installed the new landing and all fit well and works great. The price was the best I could find and the service was great. All this and free shipping. Thanks to Jennifer for her help.


The landing gear for my fifth wheel was just what I needed and came with instructions and online video that was very helpful with installation


Easily installed and performs well! This landing gear replaced the original landing gear of my camper.


The landing legs were delivered yesterday the 28th as promised. They were what I was expecting. I installed them soon after arrival. Thank you.


Great replacement jack; simple to insta ll!

Garry V.


The jack legs are great. Never a problem!


Excellent product, well made, smooth working, easy to install.
Leeza J was a GREAT Help finding the equipment I needed.
I have ordered several different times from etrailer.
People are very helpful and all products have been great.



All the parts are there, and it is easy to install.

Show More Reviews

See what our Experts say about this Stromberg Carlson Camper Jacks

  • Landing Gear for a 1991 Dutchmen 5th Wheel Trailer
    There isn't a specific fit list for Stromberg-Carlson landing gear # LG-183708 but this set, Lippert, Venture, Atwood, and many other brands all mount the same so it is likely that this system will fit. You should have 17-1/2 inches from the bottom of the top frame clamp to the top of the bottom frame clamp (see photo).
    view full answer...
    Image 1 for
  • Can Tandem Landing Gear be Added to 1990 Excel Fifth Wheel Camper
    Behind the siding of the front of your trailer will be a section of frame that extend up and over to where the pin box is. You will have to access that by trimming back the siding there so that you could weld on the brackets for the landing gear like the part # LG-183708 that you referenced. You may want to take the trailer to a shop that has experience doing this.
    view full answer...
    Image 1 for
  • Replacement Landing Gear Recommendation for Trailer with Bad Follower RBW Leg
    I wish their was a follower leg that was universal and would fit your trailer that has RBW landing gear on it currently. Since I don't have a follower leg I can recommend the best recommendation I can give would be to replace both legs with a set like the # LG-183708.
    view full answer...
  • Replacement Landing Gear for 1993 Coachmen Catalina
    To determine if the Stromberg Carlson Manual Landing Gear Set # LG-183708 that you referenced will bolt up to the existing brackets you have on your trailer Coachmen Catalina, you will want to take a couple quick measurements on your current brackets. The legs for this system feature a distance of 15-1/2 inches between the weld stops (inside to inside) and a 17-1/2 inch distance from outside to outside on the weld stops. If this matches up to your current setup then the system will bolt...
    view full answer...
    Image 1 for
  • Replacement Landing Gear Lead Leg Needed for a 2008 Heartland Bighorn
    Unless you can find an exact replacement for your landing gear leg you will need to replace your whole landing gear set. Not only will the legs probably be different lengths, as you already discovered, but the gear ratio may not be the same which would result in one leg moving quicker than the other. To determine the correct replacement landing gear set for your 2008 Heartland Bighorn you will want find the weight capacity of your current landing gear and the weld stop locations as well....
    view full answer...
    Image 1 for
  • Landing Gear Recommendation for 2002 Cameo with 15-1/2 inches Between Brackets
    The dimension of 15-1/2 inches between the brackets on your landing gear means nearly every landing gear set is going to fit your trailer as that is the standard dimension. For a powered Lippert landing gear that would bolt right up we have the part # LG-1 or for the manual crank we have the part # LG-183708.
    view full answer...
  • Weight Capacity of Replacement Lead Jack with Drop Leg
    The Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear # LG-179013 has a 4,000 lb capacity. That means it will work with landing gear that has a total capacity of up to 8,000 lbs such as # LG-183708. With that in mind since you know this leg will fit as a replacement it has more than enough capacity for your 2007 Keystone Montana.
    view full answer...
  • Replacement Atwood Follow Leg for Landing Gear System on Trailer
    The Replacement Follow Jack w/ Drop Leg # LG-179014 referenced in your question features an outer tube length of 29-1/2 inches and an overall length of 32-3/4 inches. If the existing Atwood legs on your landing gear system are taller, then this Follow Leg won't be a good option for a replacement. We do not currently have a replacement follow leg available that features the 36 inch dimension you provided in your question. Since Atwood is no longer manufacturing landing gear components,...
    view full answer...
  • Landing Gear Replacement Recommendation for 1997 Fleetwood 5th Wheel w/ RBW Landing Gear
    Since your landing gear is made by RBW none of the setups we offer are going to allow you to reuse your motor. The dimension of 15-1/2 inches between the brackets on your landing gear means nearly every landing gear set is going to fit your trailer as that is the standard dimension. For a powered Lippert landing gear that would bolt right up we have the part # LG-1 or for the manual crank we have the part # LG-183708.
    view full answer...
    Image 1 for
  • Atwood Landing Gear Motor Compatibility with Stromberg Carlson Landing Gear Set
    The Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs # LG-183708 will allow you to use your Atwood landing gear motor. You may be interested in the spring mounted pull pins # LG-119113 to make leveling faster and easier with this system.
    view full answer...
  • Replacement Landing Gear Solution Where Mounting Brackets are 18-1/2 inches Apart
    If you measured your landing gear like in the attached diagram and the frame clamps are 18-1/2 inches apart you have an uncommon spacing which we don't have a direct fit for, but you can use the Landing Gear Set # LG-183708 but would need to have a welder come in and remove your current brackets and weld new ones on that are the appropriate distance apart.
    view full answer...
    Image 1 for
  • Replacement Landing Gear Jacks for 2010 Dutchmen Colorado 5th Wheel
    For your Dutchmen 5th wheel you can use the replacement landing gear kit # LG-183708 from Stromberg Carlson. This landing gear shares common fits with many other popular brands of landing gear like Lippert, Venture and Atwood. Check the spacing of the frame clamps on your existing landing gear jacks. Compare to the diagram that is linked for you. So long as you have 17-1/2-inches between clamps as shown then this kit will work great.
    view full answer...
    Image 1 for
  • Landing Gear Replacement for 2005 StarCraft Homestead Rancher 5th wheel 290RLR
    Sounds like a gear box was broken initially but not the jacks are most likely damaged internally after they were were pried on with a long bar. At this point it's probably going to be best to just replace the entire setup. Did the gear box look like the # LG-179015 that you referenced? If so, this is a very common setup and you could use the # LG-183708 as a replacement setup. Feel free to send me pictures of your landing gear and I should be able to recognize it and get you exactly the...
    view full answer...
  • Which Side Is The Lead Leg For The Landing Gear On 2008 Montana Trailer
    The lead leg of a landing gear for a trailer is typically on the driver's side of the trailer, so it would be on the left side when looking at the trailer from the rear. The easiest way to tell is to open the access door for the landing gear and see which gear has the motor or gear box attached at the top of the landing gear. check out the attached photo that shows what the lead leg would look like for a manual landing gear system like part # LG-183708. For a landing gear system that...
    view full answer...
    Image 1 for
  • Fit and Compatibility of Stromberg Landing Gear Replacing Stromberg # LG-1 Currently on Fifth Wheel
    Yes, according to your outer bracket dimensions the Stromberg # LG-1 can be replaced with the Stromberg # LG-183708. You will be able to transfer your existing motor as well. I have linked the above mentioned products to this page for your convenience.
    view full answer...
  • Will the Replacement Landing Gear Follow Jack Leg # LG-19014 fit a 2009 Cardinal 3100 5th Wheel
    If the landing gear on your 2009 Cardinal 3100 5th Wheel is Stromberg Carlson landing gear yes, the Replacement Follow Jack w/ Drop Leg # LG-179014 would work well for you. The landing gear set the # LG-179014 belongs to is the Stromberg Carlson Landing Gear part # LG-183708.
    view full answer...
  • Replacement 5th Wheel Landing Gear for 1999 Fleetwood Terry 5th Wheel
    We can help you with new landing gear for your 1999 Fleetwood Terry 5th wheel. According to my research the 28-foot M-27 5K weighs about 6500-lbs dry. For cost effective manual landing gear you can use the Stromberg Carlson kit # LG-183708 or for a 12V powered set their # LG-1. You will want to match up the length of the outer tube and the lift height of your existing landing gear to ensure the new one provides the same fit and lift. The linked page will display for you all landing gear...
    view full answer...
  • Recommendation to Replace Landing Gear on 2006 Keystone Cougar 5th Wheel Trailer
    To replace the landing gear system on your 2006 Keystone Cougar I recommend taking a look at the Stromberg Carlson Electric Landing Gear Set # LG-3. This is a really nice system that features electric-powered adjustment for easy operation and heavy-duty steel construction that will hold up great over time. It has a combined weight capacity of 6,500 pounds. The outer tube of the landing gear legs measure 29-1/2 inches tall with weld stops that are spaced apart 15-1/2 inches inside to inside....
    view full answer...
  • Replacement Gearbox for Venture 940 Trailer Landing Gear
    If your Venture landing gear was made by Lippert Components (which it should be) and the landing gear style is the same as or similar to # LG-183708 then yes, you can use the Replacement Aluminum Gearbox # LG-179015. If it is a different design or not made by Lippert then it will not be a fit.
    view full answer...
  • Recommended Landing Gear Legs for 1988 Terry Resort 5th Wheel Trailer
    The Stromberg Carlson Manual Landing Gear Set part # LG-183708 would be a great candidate for a 1988 Terry Resort 5th Wheel Trailer. In regards to fit, the landing gear legs are designed to replace those with weld stops spaced 15" apart inside to inside. This is the most standard spacing but there are new brackets included if your landing gear legs don't match up with the existing.
    view full answer...
  • How To Determine What Brand Landing Gear Is On 2007 Montana Mountaineer Fifth Wheel
    Normally, you will be able to find the make and model information directly on top of the jack or landing gear. If not there it may be near the bottom of the outer tube. Another place to check out would be on or inside the housing that the gears are in. If you cannot find it in any of these places, it may be in the owners manual for the fifth wheel. The Lead Jack Repair Kit, part # LG-146059 is designed for Stromberg Carlson Trailer Jack part # LG-1 or part # LG-183708 landing gear.
    view full answer...
  • Solution for Atwood Landing Gear Jack Legs that are Damaged on Fifth Wheel
    So Atwood stopped making fifth wheel landing gear so the replacement legs are no longer available and also there are no other manufacturers that have a suitable replacement. So what you'd need to do is replace the landing gear altogether like with the Stromberg part # LG-183708 for a manual setup or part # LG-1 for a powered kit.
    view full answer...
  • Will Replacement Follow Jack # LG-179014 Work on a 2008 Dutchman Denali Landing Gear
    The Replacement Follow Jack with Drop Leg, # LG-179014, is designed for use with the Stromberg Carlson # LG-1 or # LG-183708 landing gear and also works with most other brands of landing gear, including Atwood and Lippert. This jack measures 2-1/2 inches wide and has a weight capacity of 3,000 pounds. If you would like to send me an email with the manufacturer name and model number of your landing gear, I would be happy to speak with one of my contacts at Stromberg to ensure that this...
    view full answer...
  • Replacement Landing Gear Leg Set for a 1998 Fleetwood Terry 5th Wheel Trailer
    In order to make sure we get the best set of landing gear legs for your 1998 Fleetwood Terry 5th Wheel Trailer, I would need to know how long the outer tubes are on your existing landing gear legs. If they are 29-1/2" long then I recommend using the Stromberg Carlson Electric Landing Gear Set part # LG-3 but if they are 33-1/2" then I recommend using the Stromberg Carlson Electric Landing Gear Set part # LG-4. The location of the mounting bracket on your trailer now should line up with...
    view full answer...

Do you have a question about this Camper Jack?

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jacob T
Video Edited:
Jacob T
Employee Randy B
Installed by:
Randy B
Employee Shelly K
Updated by:
Shelly K
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Matthew E
Updated by:
Matthew E
Employee Zach D
Video by:
Zach D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924