Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there, I'm Michael with etrailer.com. Today, we're going to take a quick look at the Lippert Components Venture Follow Leg repair kit for your fifth wheel RV landing gear. This is going to provide several different components here to fix many of the potential troubles that you could have with your power landing gear, so that you can get back to camping. This kit is produced by Lippert Components. If you're not familiar with that name, they do provide most of the power landing gear that comes standard on your fifth wheel RVs produced today. Almost all of your fifth wheel RVs are going to have a Lippert Components Power Landing Gear on them.
If you run into any problems, this is the kit from Lippert to help you with that.This is going to include a 4" long, 1/2" diameter follow drive shaft. It's also going to include two drive shaft bushings an E-Clip, a 13/16" long by 7/32" diameter drive pin, and a 1 1/8" long by 7/32" diameter spiral pin, as well as a 12T bevel gear. It's got 12 teeth on it. This is a 1 3/8" in diameter. We also have a 16T, so it's got 16 teeth on there, bevel gear.
This is going to be 1 3/4" in diameter. Then we also have a shim washer, which is 15/16" in outer diameter, and then 1/2" in inner diameter.You're probably never going to need all of these components, but if you even need one of them, it will be nice to have the direct replacement from Lippert. But then you also have some of these other components around. Most likely you're going to be using one of these bevel gears. Your original has stripped, you're needing a replacement so that your gears will function correctly, but it will be nice to have some of these other components as well.
These are made here in the USA, so you can trust they're made to the high quality standards that we've come to know and trust for products that are made here in the U.S. If you're needing some replacement gear, this is going to be the kit for you. That's going to complete our look through today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 4.7 out of 5 stars (76 Customer Reviews)
As stated in lead leg kit, everything worked out great
All the pieces were an exact match.
I dont know. I'm not rating because it's a product rating, not service. When i ordered, i paid extra because it said wednesday delivery. I DIDN'T GET TRACKING UNTIL THURS. I paid extra because i needed by thurs. Wasn't delivered until fri. I had to order from another source, so now i have two. I'm pretty sure i'm done with etrailer!
Katrina B.
6/15/2023
I am sorry for any confusion. It looks like you had chosen ground shipping. When it comes to ground shipping, we can not guarantee on what the arrival date and time would be. You always have the option to return the item or refuse the shipment, however, it is possible that you would be responsible for the return shipping.
Perfect product for rebuilding these legs that are not made any more
Excellent P.
10/15/2018
The product worked great. I would buy from you again
Installed the kit in the follow leg on my 2008 Montana 5th Wheel Trailer after one of the original pins broke and locked the gears. Installation was easy and straightforward. It's been a year since installation and have had no issues.
Fast shipping !
super service 3 day shipping was next day as i sat down for dinner. Never knew slc to cedar city utah. XX dollar part XX dollar shipping but right part perfect time for the brown truck to pull up. Tore the landing gear out put in new gears grease works great will be ordering a motor for the rear when i get to colorado in may. Thank you etrailer.
Perfect fit and was very easy to install. Jack is working like new again.
Have yet to install, hence the less excellent rating. However, the parts do feel quite solid. I ordered both the lead leg kit and follow leg kit just to get them both done and over with (its a 2004 model year). This package looks like someone mightve damaged the bag ans just plastic wrapped it back up.
Perfect kit to repair my leg on Columbus 5th wheel. Great instructions. Thanks etrailer.
I'm sure that these are great if they fit your landing gear leg. These did not fit mine. They are nearly identical to the ones I have. The only difference is mine have a 5/8 diameter hole through the 16 tooth gear. This set had a 1/2" diameter through hole. The 12 tooth gear that I have has a groove around the outside diameter to accept a wire like snap ring to cover the pin and hold inplace. I cannot find the ones I have. My bad though. When I ordered them it was because I didn't know what manufacturer or part number that I had. The components aren't marked
I had looked around for these parts and had a hard time finding them. Thanks to Etrailer the parts were exactly what I needed, every thing fit perfect just like it should.
Thanks,
Exact replacement, very pleased. Also purchased similar repair kit for Lead Leg two years prior and still pleased. That's why I purchased second kit for Lag leg.
old landing gear gears where worn out, replaced with this new set and worked perfect. will buy from etrailer again.
Was wrong items just have had time to re order asked for the longer shaft but got short shaft.
Brooke M.
8/19/2022
So sorry to hear that. I have sent this to our customer service team and they will reach out to you soon to see you squared away.
Worked great, but both times I've purchased this $30 kit, I've found I really only needed the 0.15 cent washer in them. It gets warped and bent if you go too far with the landing gear. That's what breaks.
Easy exact replacement for my 5th wheel legs. Over a year and still going strong.
Arrived in a timely manner. Easy to install. Took longer to remove and replace the leg than it took to put in the new repair kit.
This kit is every bit as good as the Stromberg-Carlson, but a lot less pricey. If you need the whole thing or, usually, only a couple parts this is the one to buy.
Bought this kit for back up, in case of similar trouble with a lift leg in the future. Left and right kits are interchangeable, with the exception of the rod that inserts into the leg. However, it is the gears that would be worn/broken, or the pins, so the old rod can easily be reused without concern. Quality components.
Exactly what we needed to repair our Landing Gear and delivered prompt without any issues. Thanks for the great service and reasonable pricing
Fit and function great, easy install, had to follow with a gear box due to wear.
Parts were delivered on time and in perfect condition. Highly recommend etrailer.com.
Very good Choice and service
product was as advertised, got it quickly and replacement was an easy install thanks to step by step directions.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don
8/30/2024
As advertised. We have had no issues with the product!