See what our Experts say about this Yakima Roof Rack

• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Will the Thule Hullavator Pro Fit on Yakima HD Bars
  Yes. The Thule Hullavator Pro # TH898 will fit on Yakima HD Crossbars like the # Y01157 mounted either in the channels or using the clamp on mounts. Since the Hullavator Pro does not come with locks included you may want to consider adding those with the Thule One-Key System Lock Cylinders - Qty 2 # TH450200 to help keep the carrier and boats from walking away while you're out on the water.
  view full answer...
• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Is the Yakima Bedrock HD System Compatible with Yakima Jetstream Bars
  I might have a solution for you, but the Yakima Bedrock HD System # Y01160-58 are only compatible with the Yakima HD bars like the # Y01157. The Yakima Bedrock HD, Overhaul HD # Y01151-58 and Outpost HD # Y01152-58 systems are all only compatible with Yakima HD bars and there are no adapters available for the footpacks on the HD systems to allow for the attachment of other styles of bars. If you can let me know what kind of truck you have, I might be able to locate a truck bed rack system...
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Will RhinoRack Batwing Awning Work with Yakima HD bars
  Yes, the Rhino-Rack Batwing Awning Driver's Side # RR33100, or # RR33200 Passenger's Side are compatible with the Yakima HD Crossbars, like # Y01157. The Batwing uses the top channel on your Yakima bars to attach to them with the included hardware. Both the Yakima HD bars and the Rhino-Rack Vortex bars use a 7/16 inch wide top channel, so you'll just want to follow the same instructions as if you were mounting the awning on the Vortex bars. I've attached the complete installation instructions...
  view full answer...
  
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Does The Length of the Yakima HD Crossbars Include The End Caps?
  The 60" Yakima HD Crossbars # Y01157 are going to be 60" from end to end including the caps. As you need 60" of T-slot you would need to step up to the 68" Crossbars # Y01158.
  view full answer...
• Correct Yakima Towers for a 2023 Toyota Sequoia
  The towers compatible with your 2023 Toyota Sequoia is going to be those TimberLine Towers for Yakima Crossbars # Y33TR. These towers will work with Yakima's JetStream # Y00426, HD # Y01157, CoreBar # Y00422, and RoundBars # Y00409.
  view full answer...
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
  You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
  view full answer...
• Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4
  The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
  view full answer...
• Malone Seawing Compatibility With Yakima HD Crossbars
  I went ahead and checked to see if the Malone Seawing # MPG107MD would fit the Yakima HD bars # Y01157 and they do not. The bolts are just a little too short. What you can do is either go to the hardware store and get similar bolts but longer or you can install it via t-track using this kit # MPG8287 to fit it into your T-Slots on your Yakima HD bars.
  view full answer...
• What Crossbar System, Platform, Hitch, and Bike Rack do You Recommend for My 2005 Honda Element?
  Yakima does make a square crossbar system for your bare roof 2005 Honda Element. I recommend the following parts: -Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 -Towers # Y53TR -Adapters # Y03541 -Landing Pads # Y00229 As far as adding more racks to the setup, the only way to do it would be by attaching something like the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B to your roof as long as there is enough space either between,...
  view full answer...
  
• Malone Seawing Compatibility With Yakima HD Crossbars
  I went ahead and checked to see if the Malone Seawing # MPG107MD would fit the Yakima HD bars # Y01157 and they do not. The bolts are just a little too short. What you can do is either go to the hardware store and get similar bolts but longer or you can install it via t-track using this kit # MPG8287 to fit it into your T-Slots on your Yakima HD bars.
  view full answer...
• Correct Size Yakima HD Crossbar for a 2016 Ford F-150
  The recommended size Yakima HD Crossbar for a 2016 Ford F-150 is 60", part # Y01157, this should provide around a 3-4" overhang which is standard. If you want to go with a longer option like 68" part # Y01158, you can do so but you'd have more overhang. This could be calculated for each bar size using the info above. In order to complete this setup you'll need the following; part # Y28TR, part # Y03541, and part # Y06122.
  view full answer...
• Does Thule Hullavator Fit Yakima HD Crossbars Using T-Slots
  Yes, you can absolutely mount your Thule Hullavator Pro Kayak Carrier # TH898 into the T-slot channels of the Yakima HD crossbars. The HD crossbars are available in the following sizes: - 55" Long: Yakima HD Crossbars # Y01156 - 60" Long: Yakima HD Crossbars # Y01157 - 68" Long: Yakima HD Crossbars # Y01158 - 78" Long: Yakima HD Crossbars # Y01159
  view full answer...
• Weight Capacity of the Yakima HD Crossbars
  The Yakima HD Crossbar Set, part # Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part # YA34FR, states that its weight capacity is 500 lbs because these bars are intended to be used as a set (either with the same one or with another HD bar of a different length). Even with just the 500 lbs, this number is more than likely much higher than you can put on the top of your vehicle. Though these crossbars...
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Which Yakima Roof Rack Fits 2022 Ford Maverick
  Hi Alvin, Nice choice going with the Yakima rack as they make really high-quality gear. As for the correct parts for your 2022 Ford Maverick, you can actually get everything combined with just one part number depending on the bars you want. You mentioned the FX, and that is a flush-style roof rack system, which means the bars only go the width of your roof with no overhang. The FX uses bars and towers that are combined, so they aren't actually separate; to go that route you'd just need...
  view full answer...
• Roof Rack With Longer Crossbars For 2023 Kia Sorento With Naked Roof
  Hello Katherine, thanks for reaching out. Yes, we do have a product that will work for you! The best option for this will be to go with a Yakima JetStream roof rack. The design of their bars and towers allows for longer than standard crossbars, so we can set you up with something longer. For the Yakima bars, a 60" crossbar will be the closest option for something longer than 56". Here are the parts you will need for the complete roof rack system: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• How to Tell if Thule Hullavator Kayak Carrier Will Fit on a Tesla Model 3
  Both the current Hullavator Pro # TH898 and the older model, part 897XT that you have, require the crossbars to overhang the feet of the roof rack by 4" - 8" for their to be enough clearance to lower the carrier without making contact with any given vehicle. If you're Tesla Model 3 crossbars have a T-Slot, you still have the T-Slot mounting hardware, and the crossbars can achieve an overhang then you'll be good to go. The nice thing is that you already have this discontinued carrier so...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• What is the Best 16 Cubic Foot Or More Cargo Box/Crossbars for My 2018 Nissan Murano SL?
  There are a couple options for a cargo box setup on your 2018 Nissan Murano SL with a bare roof. As far as the box, I recommend the Yakima SkyBox 16 Roof Cargo Box - 16 cu ft # Y95AV or the Yakima SkyBox 21 Rooftop Cargo Box - 21 cu ft # Y07337. The great thing about the SkyBoxes is that they include the SuperLatch system that ensures the lid is latched closed and locked. With this mechanism, the key cannot be removed unless the lid is closed properly. In addition, the SkyBoxes include...
  view full answer...
• Should Rear Bar Sit Higher Than Front Bar on Yakima Roof Rack System for 2017 Honda Pilot
  The front and rear Yakima JetStream Crossbars like # Y00426 should be level to each other on your 2017 Honda Pilot. Looking through the installation instructions for the BaseLine Towers # Y28TR and Fit Kit # Y00146 for your Honda Pilot, it does appear that the feet are positioned onto contours that are on the vehicle's roof. To compensate for this and to make sure the front and rear bars are not mounted at different heights, the pitch setting on the Yakima Feet need to be adjusted. I recommend...
  view full answer...
  
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• Recommended Roof Rack for 2013 Toyota Venza with Panoramic Glass Roof
  I do have a solution for you, however the Rhino-Rack roof rack that you referenced will not fit your 2013 Toyota Venza if it's equipped with the panoramic glass roof. None of the solutions from Rhino-Rack are compatible with the panoramic roof on your vehicle. I checked with Yakima though and they do state that their JetStream Crossbar system is compatible with the glass roof and will work great on your Venza. This roof rack consists of # Y00426 for the two 60 inch JetStream Crossbars,...
  view full answer...
• Roof Rack And Bed Cover Recommendation For 2024 Ram 2500 Big Horn Crew Cab
  Hello Nancy, thanks for reaching out. We do have roof rack options for your 2024 Ram 2500 big horn crew cab, but sadly we do not have a fit for the Thule wingbars, so you will need to go with something different. For that I recommend going with a Yakima JetStream roof rack. The JetStream aero bars will work great with your Hullavator so here is what I recommend: - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Roof Rack Recommendation for 2018 Toyota Camry Hybrid with Sun Roof
  For your 2018 Toyota Camry Yakima has the CoreBar roof rack with aero shaped crossbars part numbers # Y00421, # Y28TR, and # Y06192 that can be used on vehicles with sun roofs. But Yakima states to keep it closed when the rack is installed. For a carrier to carry your two kayaks we have the Thule Stacker part # TH830 then that would work well. This rack will hold the kayaks on end. See install video I attached.
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Availability of Roof Rack That Fits 2 Old Town Sportsman Autopilot 120 Fishing Kayaks
  Hey Philip! It looks like the kayaks are 37" wide so 74" for both. The Yakima HD Crossbars # Y01159 are 78" long and can be installed using the # TimberLine Towers # Y33TR and HD Bar Adapter # Y03541. However, the specs show these weigh 152 lbs each, is that correct? The weight limit of the feet/towers is 220 lbs so if they are that heavy a roof rack won't be an option. Your vehicle roof capacity may not be high enough to hold them either. If the total weight of your kayaks is 304 lbs...
  view full answer...
• Recommended Ladder Rack And Roof Rack Combo For A 2024 Ford Maverick Hauling Ladders And Canoes
  Hey Rueben, Thule doesn't have a ladder rack fit for the 2024 Ford Maverick so you'll need to go with a different rack. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 would be the best option since its tower height can be adjusted from 19" up to 30" tall from the top of the bedrails. To add on an additional crossbar to the roof of your Maverick you would need the following components: BaseClip Fit Kit # Y06180 BaseLine Towers # Y62TR HD Bar SL Adapter # Y03541 Yakima...
  view full answer...
• Will HD Bar SL Adapter Kit Fit the Yakima SightLine Towers
  Hey Dan, thanks for reaching out! Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR. Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length?
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Parts Needed to Add Yakima Rack to Diamondback SE Tonneau Cover on Ford Super Duty
  We can get your Ford Super Duty set up with a Yakima rack for your Diamondback SE tonneau cover. The Q Towers are no longer made and aren't compatible with Yakima's latest racks, so you'll need a new set of towers for the system. Here is exactly what you'll need: - Yakima 72" HD Tracks for Diamondback Truck Covers # Y92AR - Yakima HD Crossbars - 78" Long # Y01159 - SkyLine Towers # Y53TR - HD Bar SL Adapter # Y03541 - Landing Pad 26 for Yakima SkyLine Towers # Y75ZR You'll need a...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Roof Rack for Carrying a Canoe/Kayak on a 2014 Subaru Impreza with a Naked Roof
  While we do have roof racks for your 2014 Subaru Impreza, the (discontinued) Custom Fit Kit WB-K473 you referenced is for various years and models of GM pickups and there isn't a Whispbar roof rack currently in production that fits your vehicle. If you like the higher quality of a Whispbar product then you'll want to go with a Yakima roof rack as they actually manufacture the Whispbar brand. From what you were looking at I'm guessing you have a Sedan that isn't the WRX. For this you'll...
  view full answer...
• Do 2020 Hyundai Palisade And Kia Telluride Use The Same Roof Rack Crossbars?
  Hello Terry, thanks for reaching out. It would be possible to use the same crossbars on a 2020 Hyundai Palisade and a 2020 Kia Telluride. The fit kits would be different, but it would be possible, for example, to use the 60" Yakima JetStream bars # Y00426 and BaseLine Towers # Y28TR on both vehicles. Here are the fit kits you would need for each one: 2020 Hyundai Palisade (without factory flush rails) - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - BaseClip Fit...
  view full answer...
• Can Yakima Round Crossbars be Added to 2013 Honda Civic
  Hey Charles, so Yakima did change their roof rack setups a few years ago but there are still components that will allow you to use your current Yakima round bars on your 2013 Honda Civic. You'd need the Baseline Towers part # Y28TR, two sets of # Y06125, and # Y03536.
  view full answer...
• Recommended Parts Needed To Install Yakima Round Bars to a 2015 Honda Civic Hybrid
  Hey Larry. You won't have to start all the way over but the only parts you'll be able to reuse are the round bars. Here are the rest of the parts you'll need to add a roof rack to your 2015 Honda Civic Hybrid: BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers item # Y06125 - x 2 RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03536 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR If you have any additional...
  view full answer...
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• What Kayak Load Assist Can I Use With My Lockrack For My 2016 Subaru WRX
  I do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items to help you load your kayak with the Lockrack Loading Bar. The Rhino-Rack Universal Load Assist - Crossbar Mount - Side Loading - 132 lbs, part # RR-RUSL. This load assist bar clamps to your roof top rack and it has a weight limit of 132 lbs....
  view full answer...
  
• Picking Between 50 and 60 inch Yakima Jetstream Roof Racks for 2021 Kia Telluride
  Going with a longer crossbar does give you more space to mount roof accessories and carriers but the longer bars do tend to get in the way a little more and create a little more wind noise. So really it comes down to considering how many things you plan to carry on the roof rack and how wide they might be. Now that said the 60 inch Jetstream rack Yakima offers part numbers # Y00426, # Y28TR, # Y06125, and # Y06165 is the correct rack for if you have a naked roof and the 50 inch rack part...
  view full answer...
• How to Determine Correct Roof Rack For 2024 Kia Telluride
  I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
  view full answer...
  
• 2022 Kia Telluride Roof Rack Recommendation for 2 Thule Hullavator Pro Kayak Carriers
  Yes, you can fit 2 of the Thule Hullavator Pro # TH898 on your 2022 Kia Telluride. They use up 28-1/2" of crossbar space and weight in at about 40 lbs each so we definitely want to keep that in mind as we look into roof rack solutions. I recommend going with a Yakima JetStream roof rack system because it's the only system where the bars will be long enough to accommodate 2 of the Hullavators (not to mention it is a nice roof rack system). The correct roof rack kit depends on if you have...
  view full answer...
• Recommended Roof Rack System For 2021 Kia Telluride LX with Naked Roof
  The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
  view full answer...
• Recommended Roof Rack and Cargo Box for 2022 Kia Telluride
  For your 2022 Kia Telluride I recommend the Yakima CoreBar rack which includes part numbers # Y00422, # Y28TR, # Y06125, and # Y06165. This rack has an aerodynamic, teardrop shape to reduce noise and vibration and reduces drag to help maintain fuel efficiency. For a roof box, I recommend the Thule Motion XT Rooftop Cargo Box # TH629806. It has a carrying capacity of 18 cubic feet and can hold up to 165 lbs. Since the roof rack can hold 220 lbs, it will be able to handle the weight of any...
  view full answer...
• Can You Install Roof Rack System On 2013 Toyota Camry With Sunroof
  You can definetly install a roof rack system onto your 2013 Toyota Camry with a sunroof. I recommend the Yakima Roof Rack System which consists of four items. Yakima CoreBarCrossbars # Y00421, Yakima BaseLine Towers # Y28TR, Fit Kit # Y06119 and Fit Kit # Y06125. This system will allow you to carry multiple accessories like cargo carriers, kayak carriers, and bike racks on the roof of your vehicle and using the Yakima Same Key System Lock Cores # Y07204 will lock the roof rack to your...
  view full answer...
• Recommended Roof Rack for 2020 Kia Telluride
  There are a lot of great options for roof racks for your 2020 Kia Telluride, but unfortunately, none of them meet the 220 lbs weight capacity you are looking for. 165 lbs is a common weight limit for roof rack systems. This is usually because of the limitations of the mounting system. Your vehicle roof and typically the actual crossbars themselves can be rated for 220 lbs but the mounting feet that attaches the bars to your roof might be rated for less, so this becomes the limit for the...
  view full answer...
• Yakima Q-Clips for a 2009 Toyota Tacoma Double Cab
  Thanks for sending us a picture! The 2009 Toyota Tacoma requires 2 different sets of Q Clips when installing a Yakima roof rack. First, the front clips will be Q-127 and rear clips are Q-128. The Q Clip system has been discontinued by the manufacturer so if you don't have access to old parts, then I recommend using the round bars and adding the following parts to complete the system: # Y28TR, # Y03536, # Y06125 and # Y06128.
  view full answer...
  
• Recommended Roof Rack for Roof Top Tent on a 2022 Kia Telluride
  I have a couple of options for roof racks depending on whether or not your 2022 Kia Telluride has the flush mounted rails that run front to back. If your Kia has the flush mounted rails that run front to back you will want the 2022 Kia Telluride Roof Rack by Rhino Rack. The Roof Rack Includes: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2 Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4 item # RR94DY If...
  view full answer...
• Will the 60-Inch WingBar Evo Crossbars Fit My 2022 Kia Telluride
  The reason why 60-inch WingBar Evo Crossbars # TH711520 are not rated to fit your 2022 Kia Telluride is because the WingBars have attachment slits on the bottom where it connects to the Evo Flush Rail Feet # TH710601 with the Fit Kit for Thule Evo Flush Roof Rack Feet - 186095 # TH77JV. If the crossbars are too long and your roof is too narrow, the slit where the feet connects to the crossbar will not extend far enough to connect, which is the case with the 60-Inch Wingbars. I went ahead...
  view full answer...
  
• How To Reuse Yakima Q-Towers on a 2018 Volkswagen Golf GTI
  I do have an option for you but I don't have any way for you to use your old Q-Towers on your new 2018 Volkswagen Golf GTI because the clips are just not available. The best option you have to reuse some of the components you have now is to purchase new clips part # Y06123 for the front and part # Y06125 for the rear, new feet part # Y28TR, and the adapter part # Y03536. I am not sure what you are asking in regards to Thule but most of their accessories will work with the Yakima round...
  view full answer...
• Yakima Roof Bike Rack Recommendation for 16 Kids Bike Wheels on a 2018 Subaru WRX Sedan
  As far as Yakima racks that work with 16" and 20" wheels, the best and only option is the fork-mounted Yakima HighSpeed # Y02115. With this rack, I confirmed with Yakima that it does not require a minimum or maximum wheel diameter as long as the bike's tires do not exceed 5" wide and the bike's wheelbase does not exceed 48". As far as compatibility with the kid's bike, it is compatible with 9 mm x 100 mm, 12 mm x 100 mm, 15 mm x 100 mm, 15 mm x 110 mm, 15 mm x 135 mm, 15 mm x 142 mm, 15...
  view full answer...
• Yakima Round Bar Roof Rack Compatible with 2012 Honda Civic 4 Door
  For your 2012 Honda Civic 4 door, you are correct that the rear clips Q131 are obsolete. I confirmed this with my contact at Yakima. Unfortunately that means there is not a fit for the Q Towers on your vehicle. If you want to use your round bars, you still can do that, but here is the complete round bar kit that will fit your vehicle: Round 58" CrossBars # Y00409 (or your current bars if long enough) BaseLine Towers # Y28TR Same Key System Lock Cores # Y07204 RoundBar SL Adapter...
  view full answer...
• Recommended Roof Rack And Roof Basket For 2021 Kia Telluride With Naked Roof
  Since your 2021 Kia Telluride has a naked roof without side rails, I recommend going with Thule SquareBar Evo Crossbars - Steel - 60" Long - Qty 2 # TH712500. You'll also need the appropriate Feet # TH710501 and Fit Kit # TH98ZE. Since you mentioned adding a basket, I would look into the Thule Canyon XT Roof Cargo Basket - Steel - 49" x 40" x 6" - 150 lbs item # TH859XT. This is a popular and very nice option that will fit your roof very well. I attached a few demonstration videos or...
  view full answer...
  
• Crossbar Recommendation Options For A 2022 Kia Telluride
  For your 2022 Kia Telluride if your vehicle does not have factory roof rails, then I recommend taking a look at the: -Yakima JetStream Crossbars # Y00426, with the towers # Y28TR, and the fit kits # Y06125 & # Y06165. These cross bars measures 60" long, 3-1/8" wide, 1" tall, and has a maximum weight capacity of 165-lbs. Or, If your vehicle flush mounted rails, then I suggest taking a look at the: -Thule WingBar Evo Crossbars # TH711400, with the rail feet # TH710601, and the fit kit...
  view full answer...
• Recommended Roof Rack for a 2020 Kia Sportage w/out Roof Rails
  Yes, we do have options to add a roof rack to your 2020 Kia Sportage without roof rails. I recommend the Kia Sportage Roof Rack by Yakima. You will need the following parts: Yakima HD Crossbars 500 lbs Capacity Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers...
  view full answer...
• Can I Use the Rhino-Rack Vortex with the Yakima BigCatch Kayak Saddle on a 2019 VW Golf 5 Dr
  I'll try to tackle these in the order you asked them: 1) No, the # RRRS605B will not mount where the plastic tab is and will instead mount 7-7/8" towards the front of the vehicle from the line where the front and rear door meet- the # RRRS605B will clamp into the door jams on your 2019 VW Golf 5dr 2) It's generally a no-go when it comes to opening your moon roof with a roof rack attached to your roof. Luckily this roof rack is fairly easy to install and remove so you'll likely want to...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Do 2020 Hyundai Palisade And Kia Telluride Use The Same Roof Rack Crossbars?
  Hello Terry, thanks for reaching out. It would be possible to use the same crossbars on a 2020 Hyundai Palisade and a 2020 Kia Telluride. The fit kits would be different, but it would be possible, for example, to use the 60" Yakima JetStream bars # Y00426 and BaseLine Towers # Y28TR on both vehicles. Here are the fit kits you would need for each one: 2020 Hyundai Palisade (without factory flush rails) - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06138 - BaseClip Fit...
  view full answer...
• Picking Between 50 and 60 inch Yakima Jetstream Roof Racks for 2021 Kia Telluride
  Going with a longer crossbar does give you more space to mount roof accessories and carriers but the longer bars do tend to get in the way a little more and create a little more wind noise. So really it comes down to considering how many things you plan to carry on the roof rack and how wide they might be. Now that said the 60 inch Jetstream rack Yakima offers part numbers # Y00426, # Y28TR, # Y06125, and # Y06165 is the correct rack for if you have a naked roof and the 50 inch rack part...
  view full answer...
• How to Determine Correct Roof Rack For 2024 Kia Telluride
  I'm going to go ahead and respectfully disagree that we're idiots, Paul. I'm confident we can figure out the combination for a roof rack on your 2024 Kia Telluride, and there are three possible options Kia has for your roof - flush-mounted rails, raised side rails, and a bare roof. I made some diagrams below showing test fits on a Kia Telluride with photos from the nice folks at Yakima so you can see the difference (please note these are just test fit photos, and not exactly how the rack...
  view full answer...
  
• 2022 Kia Telluride Roof Rack Recommendation for 2 Thule Hullavator Pro Kayak Carriers
  Yes, you can fit 2 of the Thule Hullavator Pro # TH898 on your 2022 Kia Telluride. They use up 28-1/2" of crossbar space and weight in at about 40 lbs each so we definitely want to keep that in mind as we look into roof rack solutions. I recommend going with a Yakima JetStream roof rack system because it's the only system where the bars will be long enough to accommodate 2 of the Hullavators (not to mention it is a nice roof rack system). The correct roof rack kit depends on if you have...
  view full answer...
• Recommended Roof Rack System For 2021 Kia Telluride LX with Naked Roof
  The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components: Crossbars # Y00429 Feet # Y28TR Fit Kits # Y06125 and # Y06165 I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft. Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most,...
  view full answer...
• Recommended Roof Rack and Cargo Box for 2022 Kia Telluride
  For your 2022 Kia Telluride I recommend the Yakima CoreBar rack which includes part numbers # Y00422, # Y28TR, # Y06125, and # Y06165. This rack has an aerodynamic, teardrop shape to reduce noise and vibration and reduces drag to help maintain fuel efficiency. For a roof box, I recommend the Thule Motion XT Rooftop Cargo Box # TH629806. It has a carrying capacity of 18 cubic feet and can hold up to 165 lbs. Since the roof rack can hold 220 lbs, it will be able to handle the weight of any...
  view full answer...
• Recommended Roof Rack for 2020 Kia Telluride
  There are a lot of great options for roof racks for your 2020 Kia Telluride, but unfortunately, none of them meet the 220 lbs weight capacity you are looking for. 165 lbs is a common weight limit for roof rack systems. This is usually because of the limitations of the mounting system. Your vehicle roof and typically the actual crossbars themselves can be rated for 220 lbs but the mounting feet that attaches the bars to your roof might be rated for less, so this becomes the limit for the...
  view full answer...
• Recommended Roof Rack for Roof Top Tent on a 2022 Kia Telluride
  I have a couple of options for roof racks depending on whether or not your 2022 Kia Telluride has the flush mounted rails that run front to back. If your Kia has the flush mounted rails that run front to back you will want the 2022 Kia Telluride Roof Rack by Rhino Rack. The Roof Rack Includes: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 item # RRVA137B-2 Rhino-Rack SX Series Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4 item # RR94DY If...
  view full answer...
• Will the 60-Inch WingBar Evo Crossbars Fit My 2022 Kia Telluride
  The reason why 60-inch WingBar Evo Crossbars # TH711520 are not rated to fit your 2022 Kia Telluride is because the WingBars have attachment slits on the bottom where it connects to the Evo Flush Rail Feet # TH710601 with the Fit Kit for Thule Evo Flush Roof Rack Feet - 186095 # TH77JV. If the crossbars are too long and your roof is too narrow, the slit where the feet connects to the crossbar will not extend far enough to connect, which is the case with the 60-Inch Wingbars. I went ahead...
  view full answer...
  
• Crossbar Recommendation Options For A 2022 Kia Telluride
  For your 2022 Kia Telluride if your vehicle does not have factory roof rails, then I recommend taking a look at the: -Yakima JetStream Crossbars # Y00426, with the towers # Y28TR, and the fit kits # Y06125 & # Y06165. These cross bars measures 60" long, 3-1/8" wide, 1" tall, and has a maximum weight capacity of 165-lbs. Or, If your vehicle flush mounted rails, then I suggest taking a look at the: -Thule WingBar Evo Crossbars # TH711400, with the rail feet # TH710601, and the fit kit...
  view full answer...
• Does Yakima Roof Rack Fit 2021 Kia Telluride With a Naked Roof
  I checked with the manufacturer for you and can confirm that the Yakima roof rack is absolutely a fit for your 2021 Kia Telluride with a bare roof. It will work and fit perfectly on your Telluride to allow you to carry whatever cargo you need. The rack is made up of the following parts: - Yakima JetStream Crossbars - # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack # Y06165 - BaseClip Fit Kit for Yakima BaseLine Roof Rack # Item...
  view full answer...
• What Roof Rack and Largest Thule Cargo Box Do You Recommend for My Bare-Roof 2022 Kia Telluride?
  For a great compatible roof rack system for your bare roof on your 2022 Kia Telluride, I recommend the following setup: - Yakima CoreBar Crossbars - Steel - Black - 60" Long - # Y00422 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06125 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06165 - Yakima Same-Key Lock Cores # Y07204 Not only will the Yakima CoreBar system allow you to mount...
  view full answer...
• HD Yakima Roof Rack that Fits 2021 Kia Telluride
  The Yakima HD Roof Rack that fits your 2021 Kia Tulluride part numbers # Y01157, # Y28TR, # Y03541, # Y06125, # Y06165 gives you a 60 inch crossbar roof rack which would be enough to fit all of the roof top accessories you mentioned because of the length and the top channel. Some of that depends on the width of the cargo box but I don't believe it would be an issue. The Yakima SkyBox 16 part # Y07335 would work great and is 36 inches wide. The bars are a heavier duty option but are still...
  view full answer...
• Roof Rack and Thule Cargo Box Recommendation for 2021 Kia Telluride with Naked Roof
  For your 2021 Kia Telluride with a naked roof the best roof rack option is the Yakima JetStream rack part numbers # Y00426, # Y28TR, # Y06125, and # Y06165. This is the highest capacity roof rack that fits your vehicle, is the easiest to install, and has the quietest bar design. You could then carry a cargo box like the Thule Motion XT part # TH629707 which is similar in color to your vehicle and is very easy to use and well made.
  view full answer...
• Roof Rack Recommendation for a 2020 Kia Telluride with Factory Rails
  When Thule discontinued the old square bars, they unfortunately stopped manufacturing the compatible roof rack feet, so there won't be a Thule fit kit that would be compatible with the vehicle and your Telluride. At present, Yakima is the only manufacturer offering a roof rack fit for the 2020 Kia Telluride. The kit you'll need will depend on whether your vehicle has the side rails that run along the edge of the roof, front to back. For the raised side rails, you can assemble a rack using...
  view full answer...
• Roof Rack and Thule Cargo Box Recommended for 2022 Kia Telluride
  I'd recommend a Yakima JetStream roof rack. The rack provides aero-style crossbars which offer less wind resistance than round or square crossbars, and would be much more quiet. You can assemble the roof rack using these parts: • 60 Inch JetStream crossbars part # Y00426 or silver as part # Y00429 • Yakima BaseLine towers, part # Y28TR • Vehicle Specific fit clips, part # Y06125 and # Y06165 (different clips are used for the front and rear crossbar) A Thule cargo box would be compatible...
  view full answer...
• Recommendation to Carry Skis and Snowboards on Roof of 2021 Kia Telluride
  To start off we will need to get a roof rack on your 2021 Kia Telluride for which I recommend the Yakima JetStream system which includes the following: 60" JetStream Crossbars - Black # Y00426 BaseLine Towers - # Y28TR Fit Kits - # Y06125 and # Y06165 Then for a ski/snowboard carrier I recommend going with 2 of the Rhino-Rack Ski and Snowboard Carrier # RR573. This can carry 3 pairs of skis or 2 boards so you would be able to use 1 for the skis and then 1 for the boards. I've attached...
  view full answer...
• Will the Thule Vector Alpine Roof Box Fit a Medium Sized Golf Bag on a 2020 Kia Telluride
  I have a solution for you. Since the average bag of golf clubs is about 48" long x 12" wide x 12" tall, I recommend the Thule Motion XT Rooftop Cargo Box - 16 cu ft # TH629706. The Thule Motion XT comes with internal dimensions of 69" long x 31-1/2" wide x 15" tall. In addition, the Thule Motion XT comes with the same SlideLock system with One-Key locks that ensure your cargo is secure. You will be able to fully open your rear hatch if you have a crossbar system on your 2020 Kia Telluride's...
  view full answer...
• 60 Crossbar Roof Rack System For 2016 Honda Fit
  You could get these 60" long Yakima Corebar # Y00422 with the Baseline Towers # Y28TR and these two BaseClip Fit Kits # Y06156 and # Y06165. They may stick out a little farther than you expect, so watch your head when you get out of your 2016 Honda Fit!. I've included a video for you to watch to get an idea of how they install.
  view full answer...
• Recommended Roof Rack For A 2022 Kia Telluride With Naked Roof For Carrying A Thule Roof Box
  To carry the Thule Force XT XL Roof Box # TH6358B on the top of your 2022 Kia Telluride with the naked roof, you will indeed need a full system. Though we do not have a Thule roof rack system to match this roof box, we do have a Yakima set up that will fit perfectly. The Yakima JetStream Crossbars - Aluminum - Black - 60" Long # Y00426, which are the recommended size, will be the quietest ones currently on the market and will have no issues carrying the Thule roof box. To complete this...
  view full answer...
• Correct BaseClips for Yakima Jetstream Bars on a 2023 Hyundai Tucson With a Naked Roof
  I checked with Yakima, and it looks like to install the Yakima BaseLine FX Roof Rack for Naked Roofs # Y63TR & # Y73TR on your 2023 Hyundai Tucson with a naked roof, you're going to need the BaseClips # Y06165 & # Y06175.
  view full answer...
• Roof Rack Recommendation for 2020 Kia Telluride with Sunroof
  Yes, we have just what you need to carry your Yakima Skybox NX 16 # Y95AV on the roof of your 2020 Kia Telluride. Your best option is the 60-inch Yakima JetStream Crossbars # Y00426. Along with that, you'll also need the Yakima Baseline Towers # Y28TR and the custom BaseClip/Pads # Y06125 for the front and # Y06165 for the back. The JetStream bars are made of a rust proof aluminum and have the most aerodynamic and quiet design available. The Baseline Towers provide an attachment point...
  view full answer...
• Will the Thule Hullavator # TH898 Fit a 2022 Kia Telluride SX
  Yes, you will be able to use your Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading # TH898 on your new 2022 Kia Telluride SX. You will need a roof rack like the kit: Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long # TH711420 and Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails # TH710601. If you have no rails you will need a kit like the Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 # Y00426, BaseLine Towers for Yakima...
  view full answer...

Do you have a question about this Roof Rack?