Recommended Roof Rack System For 2021 Kia Telluride LX with Naked Roof

Question

Question:

What would I need to mount a roof rail/rack system to the naked roof of a 2021 Kia Telluride LX?

asked by: Yvanna R

0

Expert Reply:

The only company at the moment (June 2023) that makes a roof rack system for your 2021 Kia Telluride LX with a naked roof is Yakima, so for a roof rack system you'll need the following components:

Crossbars # Y00429
Feet # Y28TR
Fit Kits # Y06125 and # Y06165

I'd also recommend adding the locks # Y07204 to secure the roof rack to your roof to deter theft.

Out of all of the crossbar options for your vehicle this is by far the best due to the Aero design to cut down on wind noise the most, and has a t-slot channel making it to where virtually any accessory will work on your system.

expert reply by: Samuel C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 3

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 4

Hey Trace, would a 55 inch crossbar length work? If so, the Yakima HD bar part #Y22BB would be what you will want. A longer bar isn't guaranteed to fit since the mounting channel on the bottom of the bar does not extend the entire length of the…

view full answer...

Answer 5

The 6-way side of the cable included in the Hopkins Tow Bar Extension Cord #HM47057 is wired with 12V power on the center pin. This plug can be re-configured if desired by disassembling it and re-pinning it. I confirmed this with my contact at…

view full answer...

Answer 6

As long as your transmission is placed in neutral you will be able to flat tow your 2023 Subaru Crosstrek. To flat tow your Crosstrek you'll need the following parts: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-52927-5. Tow Bar:…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

I'm glad you want to stick with Yakima since it is what I would have recommended regardless. For your 2024 RAV4 with flush rails I recommend the Yakima JetStream roof rack. You will need the following: -Yakima JetStream Crossbars #Y00425 (black)…

view full answer...

Answer 9

For your application I recommend installing the Yakima JetStream roof rack on your 2021 Toyota RAV4 with flush rails: 50" JetStream Crossbars - Black #Y00425 SkyLine Towers - #Y53TR Landing Pad 23 - #Y98FR You honestly shouldn't have any…

view full answer...

Answer 10

Hi Cathy, To ensure that you can get the extra extension to mount the Thule Hullavator #TH898 you'll want to go with a Yakima roof rack system. Yakima crossbars run their mounting track the entire length of the crossbar so you can go with ones…

view full answer...

Answer 11

The closest solution I can come up with for a longer bolt than the Thule Replacement Stainless Steel T-Bolt #853-5648 is going to be the Yakima Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers #Y8880184. This replacement bolt has the…

view full answer...

Recommended Roof Rack System For 2021 Kia Telluride LX with Naked Roof

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching