Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?

Question

Question:

Can this Y03541 adapter be used to attach a Yakima HD Bar to a T-slots on the RetraxPRO XR?

asked by: Daniel

0

Expert Reply:

Hi Daniel,

The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though:

HD Bar SL Adapter for Yakima Towers part # Y03541

SkyLine Towers for Yakima Crossbars part # Y53TR

Landing Pad 1 for Yakima Control Towers part # Y00221

Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure your truck bed to get the correct length)

What are you wanting to carry on your crossbars once they're fit into the Retrax Pro?

expert reply by: Claire H

0

Daniel

7/23/2026

Thanks! Kayaks. I already have the Yakima Jaylows.

Claire H.

7/23/2026

@Daniel Oh awesome! This will be perfect for that! You'll want to make sure you get crossbars that are long enough for two kayaks to fit (unless you already have the crossbars obviously).

Answer 1

You really could use either one of the 68" #Y01158 or 78" #Y01159 bars, but I have a feeling that the 78" bars are going to stick out a little bit too far, so I do recommend going with the 68" Yakima HD Bars #Y01158. Obviously…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part #Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter…

view full answer...