Product Experts Available Now!
Call 1-800-940-8924
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
(1372 reviews)
Price: $85.59
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
Part Number: AKHD-655-35-K
In Stock
$85.59
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (1372)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKHD-655-35-K
Highlights
- For 3,500-lb Axles: Fits #84 spindles with inner bearing L68149 (1.378") and outer L44649 (1.063").
- 6 on 5-1/2" Bolt Pattern: Works with 10" brake assemblies for reliable stopping power.
- Pre-Greased and Ready to Install: Includes bearings, races, seal, grease cap, and lug nuts.
- Built for Long Use: Iron drum with zinc-enriched paint and zinc-finished bolts fights corrosion.
- Ready for Your Setup: Compatible with both electric and hydraulic drum brakes.
Features to know about
Quick Fix for Worn or Rusted Drums: Pre-Greased 3,500-lb Hub and Drum Assembly
When your old hubs start to seize or your drums show deep grooves, swapping them out is simple with this pre-greased hub-and-drum setup. It fits 3,500-lb axles with #84 spindles and is built with the inner bearing L68149 (1.378" ID) and outer bearing L44649 (1.063" ID). The bearings and races come installed and packed with lithium complex, multipurpose grease, so you don’t have to mess with packing or seal installation. Just slide it on, torque it down, and you’re ready to roll.
Built to Handle Braking Loads: 10" Diameter Drum with 6 on 5-1/2 Bolt Pattern
Reliable braking starts with the surface your shoes grab onto. This iron hub and drum assembly has a 10" diameter x 2-1/4" wide drum that works with 10" electric or hydraulic brakes. The 6 on 5-1/2" bolt pattern with 1/2"-diameter studs gives you a strong wheel connection and a weight capacity of 1,750 lbs per hub. It’s tested and certified by QAI and CSA for braking performance and safety under real-world conditions.
Ready Right Out of the Box: All Hardware Included
Everything you need for installation is already there — bearings, races, grease seal (58846, 1.719" ID x 2.565" OD), grease cap with 1.988" flange, and lug nuts. Even the zinc-finished bolts resist corrosion, and the zinc-enriched paint on the drum helps keep rust at bay. With no extra parts to chase down, you can get your trailer back on the road in one shot.
Extra Protection Against the Elements: Zinc-Enriched Coating for Longer Life
Water, road grime, and salt can eat through plain steel fast. The zinc-enriched finish on this hub and drum protects the iron underneath, keeping corrosion in check whether you’re towing through rain, slush, or coastal air. That means smoother braking and longer service life mile after mile.
Specs
Application
- Axle capacity: 3,500-lb axles with #84 spindles
- Compatible axles: Standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
Dimensions
- Actual drum dimensions: 10" diameter x 2-1/4" wide
- Works with brake assembly size: 10"
Wheel and Bolt Information
- Bolt pattern: 6 on 5-1/2"
- Wheel studs: 1/2" diameter x 1-1/4" long
- Grease cap flange diameter: 1.988"
Weight and Capacity
- Weight capacity: 1,750 lbs
Warranty
- Limited warranty: 1-year
Bearing, Race, and Seal Information
- Bearings (included):
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included):
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Determining Bolt Pattern
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
KBD2-65535-19 AxleTek 10" Hub and Drum Assembly for 3.5K Axle with Hardware - 6 on 5-1/2 - Pre Greased
Compare to Dexter 84656UC3
Ratings & Reviews
4.7
1372 reviews
by:
Keil
06/23/2026
Great service good product fast shipping
by:
Paul
02/13/2026
2021
Jeep
Wrangler Unlimited
They're emergency spares for my overlanding trailer when I'm literally hundreds of miles from civilization, or on the highway late at night.
by:
John
09/28/2026
it fit perfect with no issues.
by:
Ron
08/01/2026
They seem to be very good quality
by:
J Hat
11/09/2025
2010
Keystone
Raptor 5W Toy Hauler
Good construction bearings had plenty of grease in them.
by:
Jeremy
06/18/2025
Pre-greased hubs are the only way to go.
by:
Matt G
07/17/2017
I bought Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2,
Item # AKHD-655-35-K.
All the parts were in attendance and assembled just like they should have. Great quality at a great price.
I have NO problem recommending product or etrailer.com
Item # AKHD-655-35-K.
All the parts were in attendance and assembled just like they should have. Great quality at a great price.
I have NO problem recommending product or etrailer.com
by:
John P
03/06/2017
Chevrolet
Silverado 3500
Ordered Hub, brake assemblies, and bearings to redo bearings and brakes on a 3500 lb. dual axle trailer. Efficient and knowledgeable ordering staff, parts arrived in 3 days. Seemed to be very good quality. Price was excellent. I found the place where I order trailer wheel, bearing, hub, and brake supplies.
by:
Raymond
12/28/2017
Great products and prices. These 3,500 lb brake drum/hubs appear to be well made and will be used to complete a new axle I've had a few years to construct a tandem axle trailer. I plan to order more of these for other axles as well. The 4 lug X 4" BC hubs are also well made and will be used on a hydraulic log splitter and small yard waste dump trailer to replace one-piece wheel hubs. This will allow me to use some surplus 8" tires on 4 lug wheels I have left over from some small trailer projects.
by:
Justin
03/16/2022
The leaf springs will fit our trailer but the hubs are too small. Need to return them.
Jenny N.
3/25/2022
We sent back all the parts because they would not fit. We ended up buying from somewhere local but etrailer was not an issue! It was us ordering the wrong parts and not fitting. Would order from you guys again definitely, but our older trailer was hard to find springs and hubs to fit.
Justin
3/25/2022
We sent back all the parts because they would not fit. We ended up buying from somewhere local but etrailer was not an issue! It was us ordering the wrong parts and not fitting. Would order from you guys again definitely, but our older trailer was hard to find springs and hubs to fit.
by:
Terry H
10/29/2016
The Brake drum kits and brake pads fit great,
were easy to install and work excellent. I should have ordered spares, next time. Great service, price , and quick shipping, thanks.
were easy to install and work excellent. I should have ordered spares, next time. Great service, price , and quick shipping, thanks.
by:
Norman
08/13/2022
2015
Grand Design
Reflection Fifth Wheel
Came faster then expected, which was great, because I needed to get these installed before our big strip in a week! When they came, I was pleasantly surprised to see they had already been pre-greased and the bearings installed with the grease seal..all I had to do, was give give the brakes a little clean up, lube the backing plate where the brake shoes ride and a little brake adjustment to get the new drums on. From start to finish I was done under two hours. Thanks Etrailer for your great service as always!
Norm
Norm
by:
Travis
01/20/2022
Extremely easy experience. I had just replaced the bearings, races, and seals about a year ago but didn’t think about the drum itself for the brakes. After finding these fully assembled, pre greased, new center caps, even new lug nuts… it was a no brainer. For the price and the convenience, this was well worth it. 10/10 highly recommend! Will definately be placing another order soon for our other trailer.
by:
Christopher
08/05/2021
I have been very satisfied with this product. Installation was easy, Everything worked as suggested and the website videos were very helpful. I use this trailer a lot and have no complaints so far.
by:
Carl
12/17/2022
Very fast shipping Product looks good , but the boxes need something done to them so they don’t tear open during shipping. One of mine was completely open just a couple light fiber shipping straps would go a long ways in reinforcing these light weight boxes ,
I really liked the little plastic bearing protector’s overall very happy with my purchase and wouldn’t hesitate to order again.
I really liked the little plastic bearing protector’s overall very happy with my purchase and wouldn’t hesitate to order again.
by:
Joshua
11/04/2025
2010
Keystone
Raptor 5W Toy Hauler
Great product fit just fine.
by:
Nathan s
08/22/2016
Hi my order was missing a lug nut from a hole in the box probly from the hub. Nicky at etrailer took care of it they sent out a new lug nut.
Thank you!
Thank you!
by:
Ray
08/08/2025
Perfect fit, function and value. Thanks Kate.
by:
Julietta
12/03/2022
great that the bearings are already greased but SAD that it did not come with the grease caps. Box was taped back together. I would send pictures but that part of the website is not working for me.
by:
Robert
03/13/2025
These drums were a perfect fit for my 2016 Jayco travel trailer. They were packaged well and arrived on time.
by:
Ken Johnson
11/18/2017
All items showed up in good condition and were easy to install. Highly recommend etrailer. 2000 Trails West horse trailer with 30,000 miles stops on a dime again!
by:
Scott
01/31/2020
Stacey is very good at her job and knows the products. I received just what I wanted in a timely manner. I was glad that everything was in good condition even though the boxes were heavy damaged.
Would recommend heavier duty boxes for shipping, and Stacey was very nice to talk to.
Would recommend heavier duty boxes for shipping, and Stacey was very nice to talk to.
by:
Tom K
04/20/2017
Product received quickly, good quality and excellent price. Always great dealing with etrailer.com, they have the best customer service out there in parts-land.
by:
TraderMark
02/11/2017
A perfect fit and a great price made replacing the horse trailer brakes a snap!!!
by:
Andrew
01/08/2019
Overall a pretty good kit just missing one small item, and that is a new cotter key for the castle nut. Its odd such a complete kit is missing this small and cheap part. Would be 5 stars if they included it.
25
1372
true
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter AxleYou are correct that is a 3,500 lb axle. If you want a bearing kit the # BK2-100 you looked at is the right one. This comes with a # L44649 outer and # L68149 inner bearing along with a # 58846 (10-19) grease seal. If you want a replacement idler hub you can use the # AKIHUB-655-35-K or for a hub and drum assembly the # AKHD-655-35-K. Both of these have a 6 on 5-1/2 bolt pattern.
view full answer... - Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake DrumThe hub you describe is a 3500 lb 10 inch hub/drum with a 6 on 5-1/2 inch bolt pattern which uses an L44649 outer and an L68149 inner wheel bearing and a 58846 grease seal. For a replacement, I'd recommend the # AKHD-655-35-EZ-K hub/drum. The hub/drum includes the inner and outer bearings, races, the grease seal, dust caps for both EZ Lube and standard spindles as well as lug nuts. The hubs are pre-packed with grease. For replacement brake assemblies, I'd go with # AKEBRK-35-SA self-adjusting...
view full answer...
- Looking For Replacement For AL-KO-7230 Hub On Old Bison 2 Horse Bumper Pull TrailerHello Chris, thanks for reaching out. Based on my research, it looks like the AL-KO-7230 is a hub for a 3,500 lb axle with a 6 on 5-1/2" bolt pattern. We do offer a replacement for this, and for that I recommend the following: - Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased # AKHD-655-35-K
view full answer... - Brakes for Second Axle on Horse TrailerHey Robert! Ideally you're going to get 12V all the way back to the brakes but that typically doesn't happen. What exactly is the issue? Are they not working at all? At 8-9V I would expect them to have most of their functionality to a point you probably wouldn't notice. Are you saying you have 11V at the brake assemblies when you use the jumper pack? Do you have full 12V coming off of your vehicle when you use the manual override on your brake controller? Some typical issues with low voltage...
view full answer... - Trailer Hub & Drum & Brakes For Lippert 4,400 lb AxleHi Roman, Thanks for the photo and what you have there is a Lippert 4,400 lb axle. Those use the same bearings and hubs as 3,500 lb axles so you'll use a 3,500 lb hub, though the brakes are going to be 4,400 lb brakes (they'll still fit in the drum though). So here is exactly what you need: - Trailer Hub and Drum Assembly # AKHD-655-35-K - Lippert Electric Trailer Brakes - 4.4K Lippert Axles # LC66WD - Brake Mounting Hardware # BRKH10B The hub and drum comes with the bearings and seal...
view full answer... - Recommended Replacement Pre-Greased Hubs for a Lippert 4,400 lb Axle Dennis, many times Dexter hubs will fit on a Lippert axle, but Lippert does have a few axles out there with special spindle sizes. For your Lippert 4,400 lb axle, you can use the Trailer Hub and Drum Assembly # AKHD-655-35-K. Your 4,400 lb axle does use the same 3,500 lb axle hubs so these'll work great. These hubs also come pre-greased, includes all of the bearings, races, seals, grease cap and lug nuts.
view full answer... - Will Pre-Greased 6-Lug 3,500 lb Trailer Axle Hub/Drum Easily Fit In Place of 5 Lug HubHey Steve, yes the Trailer Hub and Drum Assembly # AKHD-655-35-K would easily swap onto the spindle of your trailer once you remove the old hub.
view full answer... - Does etrailer Hub for 3,500 lb Trailer Axle AKHD-655-35-K Come Pre-GreasedHey Craig, sorry about the confusion but the Trailer Hub and Drum Assembly # AKHD-655-35-K that you referenced does come pre-greased and ready to install. The bearings are in the hub, they have been packed with grease, and there's a grease seal installed as well so it will be a super easy and clean install. Pricing is hard to pin down but different brands offer products to us at different rates so sometimes it doesn't always seem logical that more money is better.
view full answer... - Replacement Trailer Hub for AL-KO 8490 With 6 on 5-1/2 Bolt PatternThank you for the photos, they were very helpful; we do have replacements for the AL-KO 8490 hubs with a 6 on 5-1/2 bolt pattern you have, though to make sure you get the correct replacement you need to take apart your hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. For example, Trailer Hub and Drum Assembly # AKHD-655-35-K has inner bearing # L68149, outer bearing # L44649 and is rated for...
view full answer...
- Complete Hydraulic Drum Brake Kit for Boat Trailer With 3,500 lb AxlesI would need some more information before setting you up. What is your axle's weight capacity? Do you have an idler hub or hub and drum? What size are your wheels? I'm going to send you a link to a couple of help articles on what you'll need to add brakes and if you can get back to me with more info I'd be more than happy to help.
view full answer... - Can Hub/Drums for Hydraulic Brake Assemblies be Reused Once Converted to ElectricHey Larry, if the armature surface of the drum is smooth then yes it can be used with your electric brake assemblies. Most of the time this is the case but sometimes if the drum was used for hydraulic assemblies it's not always. The surface would need to be smooth because the magnet grabs onto it there. Let me know what axle capacity you have and the wheel bolt pattern if you need to replace the hub/drums.
view full answer... - Looking for Replacement Hub/Drum for 2025 Timberleaf PikaHey Paul, if you have a 10 inch drum on your Timbren Axle Less setup the correct hub/drum replacement would be the part # AKHD-655-35-K that you referenced. This is very likely what you have but I would still measure what you have again to be sure and let me know! I would be shocked if it's something different but it sounds like you have the 2,000 lb HD Axle Less setup which actually uses 3,500 lb hub/drums and brake assemblies.
view full answer... - Looking for Replacement Hubs for 2025 Grand Design Imagine 2600RBHey Chris, I was able to determine that your 2025 Grand Design Imagine 2600RB came with 3,500 lb axles so the correct hub/drum you'd need is the part # AKHD-545-35-K if you have 5 lug wheels or the part # AKHD-655-35-K if you have a 6 lug setup. These are both pre-greased and ready to install if needed too! Have you had issues with hubs on your trailers before?
view full answer... - Do The etrailer Trailer Hub and Drum Assemblies Use Timken Bearings? Hey Michael, thanks for reaching out. I see you already got some parts on order, but I wanted to make sure your question was answered. The Trailer Hub and Drum Assembly # AKHD-655-35-K does not use Timken bearings. They are our etrailer brand bearings which we get from a company overseas. If you want a Timken bearing kit to go with your hubs, we do have that available: - Timken Bearing Kit for 3,500 lb Axles with #84 Spindle - Bearings L44649/L68149 # TMK52VR What trailer is all this...
view full answer... - Info Needed to Find Replacement Brake Assemblies for TrailerHey Norm, yes if you email me back with pictures of what you need that will be helpful. Or if you want to just let me know the axle capacity on your trailer that would be enough too.
view full answer... - Availability of Replacement Hub for AL-KO 9012 HubHi Adam; based on the measurements we have from another customer the bearing combination for this hub assembly is obsolete. It looks like it has a # 2585 inner bearing which doesn't match any modern bearing combination. If you can identify your bearings, or send me the inner diameter of the inner and outer bearings, along with the grease seal measurements measured with a digital caliper # PTW80157 I can confirm this. More than likely you're looking at a replacement axle so you might as...
view full answer... - Hub for 2025 Grand Design Transcend One 151RB to Allow 16 inch Wheel to FitHey Steve, for a hub drum to replace what you have and give you the 6 on 5-1/2 inch bolt pattern you are wanting you'd want the part # AKHD-655-35-K. Do you have a 16 inch wheel and tire already picked out? If goal was just more ground clearance would a lift kit be a better or more simple option to use instead?
view full answer... - Choosing the Right Hub for 6 on 5-1/2 Pattern with 3-3/8 PilotHi Mark, I can definitely help point you in the right direction, and we do carry hub and spindle options for a 6 on 5-1/2 pattern, but the key thing to know right up front is the bearings inside the hub determine if it will fit the spindle. What really matters is the bearing because that’s what ensures the hub seats properly and protects your bearings from wear or failure. The 3-3/8 pilot you mentioned is common and helps center the wheel, but we want to make sure the hub matches your...
view full answer... - Will 6-Lug etrailer Hub and Drum Assembly Fit on Timbren Axle-Less SystemThanks for reaching out again, David! Yes, the Trailer Hub and Drum Assembly # AKHD-655-35-K will fit with the Timbren Axle-Less Trailer Suspension # ASR2KHDS02!
view full answer... - What Brand of Bearings Does etrailer hub part # AKHD-655-35-K UseHey Ken, the etrailer hub part # AKHD-655-35-K that you referenced uses TruRyde bearings. What brand do you prefer?
view full answer... - How to Determine Replacement Hubs For Keystone Outback TrailerHey Tyler, I couldn't tell you for sure if we have parts for your 2012 Keystone Outback 210RS because we don't have any way of knowing what hubs are on your trailer specifically. There are a couple options here, so to (possibly) find the correct hubs you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital...
view full answer... - Replacement Hub/Drum Brake Assemblies for B44EA-22 BD3-6553SThe correct replacement brake assemblies for your B44EA-22 is the part # AKEBRK-35-SA which is for a 3,500 lb axle and is self adjusting. Then for a matching hub/drum that has a 6 bolt pattern on it you'd need the # AKHD-655-35-K and you'd be set.
view full answer... - Replacement For A Truryde RVD-H-65535 HubThanks for the Picture. What you have there is a 6 on 5-1/2" hub for a 3,500 lb axle. We do have a replacement hub for your Truryde RVD-H-65535 hub. The correct replacement will be part # AKHD-655-35-EZ-K. This will include the hub, bearings, seals, races and lug nuts.
view full answer...
- Replacement Wheel Stud For AxleTek BD2-655 DrumI recommend using the Replacement Trailer Hub Wheel Stud # 165981, instead of # DX98FR. The Trailer Hub and Drum Assembly # AKHD-655-35-K you reference, calls for 1/2"-1-1/4" wheel studs. The Replacement Trailer Hub Wheel Stud # 165981 is the closest I was able to find, and measures 1/2"-1-1/2", however this should work just fine.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Michael B
Video by:
Zach D
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/25/2022
You mentioned that the hub assemblies were too small and I wanted to ask what size did you need? What is the weight capacity of your axle?