Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
Updated 10/11/2024 | Published 03/29/2021
Products Featured in This Question
Question:
Looking for a hub asenley for a dexter axel 3500 pound 10 6 on 5 or 5.5 hub that is on it the part number is red-h-65535
asked by: Robert S
Expert Reply:
The hub you describe is a 3500 lb 10 inch hub/drum with a 6 on 5-1/2 inch bolt pattern which uses an L44649 outer and an L68149 inner wheel bearing and a 58846 grease seal. For a replacement, I'd recommend the
# AKHD-655-35-EZ-K hub/drum. The hub/drum includes the inner and outer bearings, races, the grease seal, dust caps for both EZ Lube and standard spindles as well as lug nuts. The hubs are pre-packed with grease.
For replacement brake assemblies, I'd go with # AKEBRK-35-SA self-adjusting brake assemblies which after initial setup, will ensure that your trailer brakes stay properly adjusted. The installation hardware for the brake assemblies isn't included. If you don't wish to reuse your existing hardware, you can use # BRKH10B to replace it.
(click to enlarge)
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: bearing buddy trailer bearings races seals caps
- Search Results: brake spoon
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Search Results: 141286
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: Dexter Drum Brake Adjustment Tool Spec Review
- Video: Brake Mounting Bolt for 7" and 10" Brake Assemblies Feature Review
- Video: Titan Brake Actuator T4748800 Review
- Q&A: Recommended Replacement Hub and Drum Assembly Kit for a UFP HD-1377-10 Hub and Drum
- Search Results: 2024028244
- Search Results: akhd~545~35k
- Search Results: trim
- Search Results: center cap
- Q&A: Parts Needed to Install Trailer Brakes on a Load Rite Trailer Model UT6512
- Video: All You Need to Know About the Trailer Hub and Drum Assembly
- Q&A: Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
- Q&A: Recommended Tire Size for Upgrading Tires From 7.00-15LT on My Horse Trailer
- Video: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles: The Breakdown
- Video: Lippert Electric Trailer Brake Assembly: The Breakdown
- Video: Review of the Snap-In Plug for Lionshead Trailer Wheel Center Caps
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Shop: RV Jack Pads
Lance F.
8/13/2024
I have this same Truryde RVD-H-65535 hub on my travel trailer but the axel is 4400#. It is not the 3500# axel the AKHD-655-35-EZ-K says it is for. Will this still work for my trailer.