What Brand of Bearings Does etrailer hub part # AKHD-655-35-K Use

Question

Question:

Part Number: AKHD-655-35-K What brand bearings do these have. Thanks so much.

asked by: Ken H

0

Expert Reply:

Hey Ken, the etrailer hub part # AKHD-655-35-K that you referenced uses TruRyde bearings. What brand do you prefer?

expert reply by: Jameson C

0

Answer 1

The Replacement Race for 2585 Bearing item #2520 is made by Redline. The Replacement Trailer Hub Bearing - 2585 item #2585 is made by TruRyde.

view full answer...

Answer 2

TruRyde and Redline are the two brands of bearings that we carry. According to my contact at TruRyde they come with a limited 3 year warranty.

view full answer...

Answer 3

Thanks for the measurements and additional information! To determine which MORryde Equalizer you need you'll want to measure the distance at the bottom of your current equalizers from the center to the center of the bolt holes. The MORryde item…

view full answer...

Answer 4

I went out to the warehouse and checked our stock of hub and drum #84656uc3. All of the units are just as you have described and the races are installed correctly. If you are looking at the inner race from the back side of the hub and drum, there…

view full answer...

Answer 5

Hey Denny! We can definitely help you out with that rough ride on your trailer. A pretty standard option is an upgraded equalizer like the MORryde you looked at. The best choice is always going to be the one that matches your current equalizer…

view full answer...

Answer 6

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 7

Hey Scott, we have a 4-leaf double eye spring that is rated for 5,200 lb axles with the part #DX45CR which is the very popular size of 25-1/4 inches. I would need to know for sure how long your current springs are to know for sure if this is correct…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 10

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 11

Despite what the manufacturers of these equalizers say, the axle/wheel spacing isn't the right way to figure out the best fit for upgraded equalizers, including the MORryde CRE3000. The wheel spacing is more of a guideline, so to determine the…

view full answer...

Answer 12

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

What Brand of Bearings Does etrailer hub part # AKHD-655-35-K Use

Product Page this Question was Asked From

Continue Researching