Availability of Replacement Hub for AL-KO 9012 Hub
Updated 12/15/2025 | Published 11/02/2024
Products Featured in This Question
Question:
Looking for a replacement hub for Al-KO 9012, Just need one. does such a product exist in your inventory? Thanks!
asked by: Adam T
Expert Reply:
Hi Adam; based on the measurements we have from another customer the bearing combination for this hub assembly is obsolete. It looks like it has a # 2585 inner bearing which doesn't match any modern bearing combination.
If you can identify your bearings, or send me the inner diameter of the inner and outer bearings, along with the grease seal measurements measured with a digital caliper # PTW80157 I can confirm this. More than likely you're looking at a replacement axle so you might as well grab your hub face measurement (axle length) while you're at it.
(click to enlarge)
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 008~219~13
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Search Results: black center cap
- Shop: Demco DA75 Trailer Brake Actuator for Disc Brakes - Zinc Plated - 2" Ball - 7,500 lbs
- Search Results: trailer axle
- Shop: Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Unitized Oil Seal
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: Replacement Master Cylinder for Toledo Drum Brake Actuators
- Shop: Demco Solenoid Kit for Brake Actuators with Reverse Lockouts - Bypass
- Search Results: 3034
- Search Results: trailer brake controller
- Search Results: dbc~mhgb
- Search Results: e4541
- Q&A: Replacement Hub For An AL-KO T44 3,500lb Axle With AL-KO 9012 Hubs
- Q&A: Will Replacement Magnet Retaining Clips # AKBRKR-MC Fit AL-KO Axles and Brakes
- Q&A: Will Dexter Nev-R-Adjust Electric Brakes K23-478-479 Fit 2013 Keystone Laredo W/ 4400lb AL-KO Axles
- Q&A: Do You Have Brakes and Hubs for My AL-KO 90-12 Hub for My 4,400 Pound Axle?
- Q&A: Recommended Bearings for a AL-KO T44 Axle
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: Brake Controller
on Trailer Hubs and Drums
Robin H.
12/15/2025
Hey Adam, were you able to get those bearing and seal measurements for your Al-KO 9012 hub? Once you had the sizes, did you find out if a replacement axle was the better route? Your update could make it easier for others working with older Al-KO setups.