bing tracking image
  1. Trailer Brakes
  2. Dexter
  3. Electric Drum Brakes
  4. 3500 lbs Axle
  5. 10 x 2-1/4 Inch Drum
  6. 14 Inch Wheel
  7. 14-1/2 Inch Wheel
  8. 15 Inch Wheel
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K

Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K

Item # 23-26-27
Our Price: $150.53
Trailer Brakes
Shipping Weight: 21 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA. Great Prices for the best trailer brakes from Dexter. Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K part number 23-26-27 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (379)
  • Q & A (0)
  • Photos

Dexter Trailer Brakes - 23-26-27

  • Electric Drum Brakes
  • 3500 lbs Axle
  • 10 x 2-1/4 Inch Drum
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Standard Grade
  • Manual Adjust
  • Dexter

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.


Features:

  • Easier to install and gives you more control than hydraulic brakes
    • Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed
  • Periodic manual adjustment required
    • Can be done in minutes
  • Long-lasting brake pads offer excellent braking torque
    • Fully bonded to shoes for more consistent braking compared to riveted pads
  • Adjuster plugs (included) protect internal components from dirt, grime, and road debris
  • Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included
    • Includes mounting hardware
  • Made in the USA


Specs:

  • Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI)
  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange bolt pattern: 4 bolt
    • Mounting flange bolt hole distance: 2-7/8" apart on center
  • Wheel size: 14", 14-1/2", and 15"
  • Axle rating: 3,500 lbs
  • Limited 5-year warranty


Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you.


How to Manually Adjust Trailer Brakes

The more miles you put on your trailer, the more your brake pads will wear down. As they lose contact with the drum, stopping distances get longer and longer. To keep your brakes working great, it's important to adjust them pretty routinely. For this job, grab a floor jack and either a brake adjustment tool (sold separately) or just a standard flathead screwdriver.


Jack up your trailer enough to get the wheel(s) off the ground. Remove the adjuster plugs from the backing plate on the brake, and insert the flat end of the tool through the back of the assembly.


Screenshot from an instruction video shows how to manually adjust the the alignment on a drum brake

Push in on the star gear and lift it up. Keep doing this until the brake pads catch on your drum. When you can't spin your wheel by hand anymore, back the gear off by about 10 clicks by pushing down on the star gear. Does the wheel now spin freely (even if it sounds like the brake pads drag slightly on the drum)? Great! Then you're all done with that one and ready to adjust the rest.


How to Break In New Brakes

After you get these brakes installed and adjusted, you'll need to break them in. First, find a long stretch of road or a big, empty parking lot. Once you're there, set your brake controller to its maximum setting and get moving. Speed up to about 40 mph and brake to slow to about 20 mph. Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.


Note: The brakes will be very hot after doing this, so after every 10 stops you'll want to wait about 10 minutes to let the brakes cool off before continuing. If you don't, you might cook and crack the pad material.



23-26 Dexter Electric Brake Assembly - LH - Driver Side - 10" x 2-1/4" - Manual Adjust - 3,500 lbs

23-27 Dexter Electric Brake Assembly - RH - Passenger Side - 10" x 2-1/4" - Manual Adjust - 3,500 lbs





Customer Satisfaction Score:


Customer Reviews

Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K - 23-26-27

Average Customer Rating:  4.8 out of 5 stars   (379 Customer Reviews)

Whether you're replacing trailer brakes or installing some on a new brake axle, these are easy to work with from start to stop. 10" x 2-1/4" Assemblies fit 14" to 15" wheels. 4-Bolt pattern backing plate. Made in the USA.

by:

The brake parts were all correct for my application and installation was straightforward with minimal tools needed. I did take the extra step of soldering the wire connections because that is the best way to do it IMO.

Stephen at etrailer was very helpful. He made sure I had all the right parts for my application. and they were on their way very quickly.

I will say that I tried to use my local dealer first because I like to support local businesses, but unfortunately, they were having trouble finding the right parts for my trailer. When we did find them, they were 50% more expensive for the exact same parts that etrailer supplied. I would also have had to drive 80 miles round trip to get them.

The reason for the 4-star rating is because of shipping/packing. The parts were heavy in large boxes with no packing material to hold them in place. Two of the hub sets were out of their boxes and there was a crushed grease cap. So, better packing to keep things in place in the boxes or use a smaller box would be nice.

I attached a few pics of before and after also tmy very worn hubs. You can see that eh armature is worn down to the studs and the magnets are starting to show the coils. It was time. Also a short video or timelapse that I titled, Trailer Brakes in 18 seconds

Etrailer Expert

Katrina D.

11/11/2023

I am sorry that the hubs arrived in this condition. Let me get you over to our customer service department for them to see what we can do for you.



by:

My first time ordering from trailer, and I will definitely go back to them in the future. George J let me know when my shipment was on the way. Carol C. let me know it had been delivered. It came three days early! Their customer service has been outstanding and I am grateful. I needed to replace some parts in my electric brakes on my 17' Casita SD, which had failed state inspection in Virginia. The dealer wanted $400 to replace the magnets. I went with a right and left wheel assembly kit made by Dexter, the company that made my axle. New everything! Not messing around. The good: Just four nuts/ bolts! The bad: two of those nuts on each assembly required more than wrenches to remove them. Be prepared! Have a plan! The two behind the swing arm can be hard to reach with a socket. And two of those broke free from the brake assembly plate, so they just spin. I had to grind the head of the studs off with an angle grinder, after removing the brake shoes. See photo. After removal challenges, assembly was easy. Just four bolts and two wires! I reassembled with an anti seize compound on the threaded studs, so that when I have to do it again, hopefully the nut's are not frozen on the studs. Etrailer's service was awesome and their prices were the best as well. I'm a believer and will go with them again. Excellent transaction and support! Oh yeah... my packages arrived in new boxes and in perfect, ready to install condition. No issues with my red at all. Give them a try!



by: 01/18/2024

Spring tensioner assembly immediately broke in my driver side drum. Im having to mail back the entire assembly on my own dime. Dexter service is nonexistent, had to go through etrailer for the warranty help. Ended up buying a whole new drum assembly because i need it asap, instead of waiting weeks for the warranty to get figured out. Very annoyed.



by:

These are awful. The first set I installed kept on catching and sticking on, despite constantly adjusting them. The second set was lightly damaged in shipping (etrailer customer support is top notch and sent a replacement set out right away) but I installed them after the first set refused to work right. They're better but they're still the grabbiest trailer brakes I've ever towed and make it hard to get a decent setting on the brake controller for good braking that doesn't snap your head each time you step on the pedal but provides decent braking performance. Save your money and buy generic brakes, instead.

Etrailer Expert

Jenny N.

11/28/2023

I wondered if you had also gone through the process of what we call bedding the brakes? This process allows the brake shoes and the magnet to seat to the drum. What you would do is drive the trailer out into an open area, like an empty parking lot. Get up to around 40 MPH and apply the manual override on your brake controller. Make sure the brake controller is set high enough where it will fully engage the trailer brakes [usually the middle setting will be just fine]. Do not hit the brake pedal during this time, as you want to slow down your vehicle and trailer with only the trailer brakes. You will most likely have to do this about 20 to 30 times to properly seat the brakes. When you feel like your brakes are properly seated, pull over and check for signs that you are done: a bit of smoke is normal and your brakes should be very hot [brakes should read 350-400 degrees with a temperature gun]. If you don't see these signs, then keep repeating the process until your brakes are properly seated.

Micah

11/29/2023

@JennyN I didn't follow the procedure for bedding the brakes that you outline but I did definitely get the first set of brakes ripping hot on a couple occasions before I realized they were sticking on. They were brand new brakes and drums so it doesn't seem like they ought to take so much work to bed. I was borrowing the trailer from a friend (and did the brakes as part of the 'rental' aspect of it) and have given the trailer back in the meantime. I'll let him know about the bedding procedure and maybe that will improve some of the grabiness he also noticed.


by:

I bought an 18 year old trailer with dexter axles so it made sense to rebuild the suspension with DEXTER components. Ordered,shipped,and rebuilt in a week. etrailer works for me!!!



by:

I purchased a brake assembly and hub kit for my travel trailer. I had a 100% positive experience with etrailer. Very helpful in placing my order.
All parts were correct and fit perfectly.
The only minor problems I encountered were as follows. The printed instructions included with the hubs were copies, that had been recopied about 3000 times. Practically illegible. One of the brake assemblies arrived without the small plastic clip that secures the wires for the brake magnet to the backing plate. Both of these small problems were "in the box" from Dexter and not the fault of etrailer
I will have no hesitation dealing with etrailer in the future.

Tony

7/11/2023

I am completely satisfied with my partspurchase 1 year later.



by:

Customer service was excellent, fast shipping and perfect replacement parts.



by:

Great product, all hardware included, no problems

Calvin

12/4/2023

Works good. Bolted right up



by:

We hadn’t changed anything on our 16ft trailer in 18 yrs. While the design had changed a bit all the new equipment fit like the original pieces.



by:

The parts that I received were very well described. They installed perfectly with no problems.



by:

Very pleased with the Dexter 10" electric brakes that I put on my car hauler. They were very easy to install. As others have said, the most difficult part was removing the nuts that retained the old brakes. I soaked them with penetrating oil prior to starting the work, yet still had to cut two off. There was plenty of wire to connect to the trailer wiring - better too long, than too short! And love that they are made in the USA.



by:

Time to replace original brakes on Jayco travel trailer. Bought two fully assembled genuine Dexter trailer brake kits. One kit for each axle. Purchase price was excellent and received fully assembled as described. Packaging was great with no damage. Free shipping! The brake assemblies looked good with no issues. Definitely new! Installed with no issues. No missing hardware. Their website was easy to use. Will buy from them again. As a side note, really appreciate the videos they provide on their website to help as required.



by:

Excellent fit, excellent quality, shipped quick, arrived in perfect condition, I truly can't think of anything negative about the product or purchase experience. They are awesome to do business with!



by:

Fit perfectly work great...no issues. Would definitely buy again.



by:

Very easy installation. The order for the break assembly was delivered on time. Looks like quality parts.
Should add Dexter stickers to delivery so we can advertise for you



by:

Easy to install and worked better than expected!!



by:

Products are great and service was excellent. The packaging for the hubs was too light. By the time they got to me some of the boxes had holes and a couple parts were missing.. Etrailer very promptly sent me replacement parts.



by:

Brake assemblies and drums arrived in perfect condition. Packed very well. It seems that way to many items from other online retailers come delivered damaged. UPS is hard on packages. etrailer.com also has superb customer service. Prices are very good. Thanks etrailer.co. Trailer lights were packed well to.



by:

e trailer made everything easy for me. I ordered the dexter electric brake kit for my camper on Wednesday evening,and by Friday morning I had received everything that I ordered. The dexter brake kit is USA made. I will be ordering from etrailer.com again. Extremely happy.



by:

Great purchasing experience; from live chat where questions were quickly answered, to fast delivery of correct parts.



by:

Bought an older trailer that needed work. These brake kits worked great. They came with everything needed to replace the old ones. Super easy install. 4 nuts on the back connect 2 wires install the drum adjust and done.



by:

Perfect fit, easy to install. Great service from Etrailer staff.



by:

Delivered exactly as described. All hardware included. Parts assembled. No guessing at all.



by:

These units are solid as a rock. High quality, easy to install and work perfectly.

Jake

8/9/2023

After two years on the road, these Dexter trailer brake assemblies are working great. Thank to the folks at E-trailer for getting me set up



by:

Great quality and fit. Very pleased


25
379
Show More Reviews

See what our Experts say about this Dexter Trailer Brakes

  • Replacement Dexter Electric Trailer Brakes For 3,500 lb Axle
    Thanks so much for that info and we do indeed have the left hand Dexter electric brake you need for your 3,500 lb axle; I'll also list out the right hand just in case. Based on the info you provided, the correct parts are the following: - Left Hand: Dexter Electric Trailer Brake Assembly - 10" - 3,500 lbs # 23-26 - Right Hand: Dexter Electric Trailer Brake Assembly - 10" - 3,500 lbs # 23-27 - Complete Kit: Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500...
    view full answer...
  • How to Pick Out Brake Assemblies for Terry Resort Fleetwood 5th Wheel Trailer
    Picking out brake assemblies for trailer axles is actually pretty easy but I am not able to determine the info I need from your trailer info since it's not something manufacturers keep records of. You do need to order a total quantity of 4 assemblies since To pick out the correct brake assemblies for your trailer you need to know a few things. You will want to measure the inner diameter of your hub/drums and the depth of the drums to determine what brake assembly dimensions you need....
    view full answer...
    Image 1 for
  • Which Left Hand Brake Replaces A 10 Inch 3,500 Pound Dexter Brake Assembly?
    If you only need a left hand brake, we definitely have what you need. The Dexter Electric Trailer Brake Assembly # 23-26 will be just the left side (driver side) brake that will come with the # 23-26-27 Dexter 10 inch 3,500 pound brake kit. This will also include the mounting hardware so no other parts will be needed.
    view full answer...
  • How Many Assemblies Come with Dexter Electric Trailer Brake Kit 23-26-27
    The Dexter Electric Trailer Brake Kit - 10inch - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27 is a pair of brake assemblies. This includes a left and a right hand assembly so it basically comes with what is needed to replace the brakes on a single trailer axle.
    view full answer...
  • Picking Out Replacement Brake Assemblies for 2003 Fleetwood Prowler Lynx
    To pick out the correct brake assemblies for your trailer you need to know a few things but I do not have ability to look up what your trailer would have had. You will want to measure the inner diameter of your hub/drums and the depth of the drums to determine what brake assembly dimensions you need. For example the part # 23-26-27 is a 10 inch by 2-1/4 inch thick brake assembly. You also want to determine what the bolt pattern is of your assembly mounting flange. The standard size is...
    view full answer...
  • Why Is There A Clicking Noise Coming From My Electric Drum Brake Assemblies
    If you're hearing clicking it's most likely just the brake controller testing for connection to the brake magnet in the assemblies # 23-26-27 by sending a pulse and energizing the magnets, causing them to cling to the hub for a second. It's normal for certain brake controllers and wouldn't be a cause for worry. If you notice the brakes starting to drag (temperature will also shoot up) then that would indicate the brake controller is sending a few volts back to the brakes causing them...
    view full answer...
  • Replacement Brake Assemblies for Dexter 3,500 lbs Axles
    Yes, the Dexter Electric Trailer Brake Kit item # 23-26-27 is the correct replacement brake assemblies for a Dexter 3,500 lbs axle. These have a 4 bolt mounting flange pattern and are compatible with 14" tires. This kit will replace one of your Dexter 3,500 lbs axles with a set of 10" x 2-1/4" driver's-side and passenger's-side electric trailer brake assemblies. I have linked an installation video below.
    view full answer...
  • How to Determine if Dexter 3,500 lb Electric Brakes Fit 2010 Wildwood X-Lite 22RBXL
    We may have a fit for brakes on your 2010 Forest River Wildwood X-Lite 22RBXL but you'll have to take a look at a couple things to determine if you can use the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27. First, you need to take a look at the axle to see if you have 3,500 lb rated axles (there should be a sticker on the axle which says this). Then you need to measure the inside of your drum to see if you have 10 inch drums; if you have...
    view full answer...
  • Replacement Braking Assemblies for 2011 Flagstaff Classic Super Lite with AL-KO Axles
    Yes, the Dexter Electric Trailer Brake Kit part # 23-26-27 will fit AL-KO Axles. They use the same four bolt pattern as Dexter does for the 3,500 lb model so there will be no issues.
    view full answer...
  • Troubleshooting Right Side Brake Magnet on Single Axle Utility Trailer
    Each brake magnet should have 2 leads, one to power, one to ground. Most of the time, folks just ground the magnet to the trailer frame, and use the trailer frame itself as the ground circuit. I'd recommend finding the point where the wiring makes a run to the right side, and test the supply wire for power after the junction. Even if the magnet is bad, you should still show power on the wire feeding the magnet. I'll link you to an FAQ article that explains how to test brake magnets to...
    view full answer...
  • Will Dexter Electric Trailer Brake Kit Fit 2002 Fleetwood Prowler With 10 Inch Drums
    It's a smart idea to go ahead and replace your brakes and yes, the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27 will absolutely fit your 2002 Fleetwood Prowler. The reason they will fit is these brake assemblies are the same dimensions as your drums, 10" diameter x 2-1/4" wide so they are perfect for you. These brakes fit a standard 4-bolt brake mounting flange which has bolt holes that measure 2-7/8" apart on center. The Dexter brake...
    view full answer...
  • Does Orientation of the Dexter Electric Trailer Brake Kit for 3,500 Lb Axles Matter
    The orientation of the Dexter Electric Trailer Brake Kit part # 23-26-27 does matter, the magnet will be at the bottom and the actuating arm will be pointed towards the front of the trailer.
    view full answer...
  • Determining if Dexter Trailer Brake Assemblies # 23-26-27 Fit 1995 Shorelandr Trailer
    We don't have a way to determine what axle your trailer has but if it has 3,500 lb axles then yes the brake assemblies # 23-26-27 would work. You can also measure the drums to see if they 10 by 2-1/4 inch as well and if so these are correct.
    view full answer...
  • Does the Dexter Electric Trailer Brake Kit item # 23-26-27 Come w/ Hubs?
    The Dexter Electric Trailer Brake Kit item # 23-26-27 includes left and right hand brake assemblies but no hubs/drums. This are just the drum brakes. If you would like me to find you a set of brake hubs I would just need to know what size bearings your trailer is currently using and the lug pattern. I have linked a review video below that will show you everything this kit comes with.
    view full answer...
  • Determining The Correct Replacement Brake Assemblies For A 2016 Airstream Sport Travel Trailer
    There unfortunately isn't a guide to tell us exactly what your trailer has so we'll first need to check the axle capacity to determine the correct replacement brake assemblies. If you look at the axle tube there should be a sticker that lists the capacity of the axle. If your sticker is missing then you can also remove the hub and measure the diameter and depth of the assembly as pictured below. For example, the Dexter Electric Trailer Brakes # 23-26-27 you were looking at are rated for...
    view full answer...
    Image 1 for
  • Recommended Trailer Brakes For An AL-KO T35 Axle On A 2008 Springdale RD179
    From everything I could find, the AL-KO T35 axle will use the same 4-Bolt Pattern as the Dexter Electric Trailer Brake Kit # 23-26-27. With that being said, the mounting flange bolt hole distance the will fit will be 2-7/8" apart on center, so I do suggest double checking your measurement, just to make sure. As long as it matches, you are good to go.
    view full answer...
  • Replacement Brake Assembly Backing Plate for Alko Axle on 2013 Coachman Clipper Camper
    For your 2013 Coachman Clipper I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469. These self-adjusting assemblies require no maintenance adjustment like your factory brake assemblies did. If you prefer the original style, then you will use the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27. Individually this is # 23-27 and # 23-26 as for some reason their pricing...
    view full answer...
  • Recommended Replacement Electric Brake Assembly for 3500 Pound Dexter Axle, 10 x 2-1/4 Inch Drum
    For your 2002 Starcraft Constellation Series camper with a Dexter 3,500 lb. axle 10" x 2-1/4" drum, the replacement electric trailer brake assemblies, are # 23-27 for right hand side, and # 23-26 for the left; # 23-26-27, for the combined kit. These brakes fit a standard 4-bolt brake mounting flange and come with everything you need for installation, including the mounting hardware. I have added links to a couple video reviews for you to check out of these brakes.
    view full answer...
    Image 1 for Image 2 for
  • Replacement 10 x 2-1/4 Inch Left and Right Hand Drum Electric Brake Assemblies
    I would be happy to help you. The 023-216-00 number you found is for a 10" x 2-1/4" left hand drum brake assembly. To replace it you will need the Left Hand: Dexter Electric Trailer Brake Assembly - 10" - 3,500 lbs item # 23-26 and Right Hand: Dexter Electric Trailer Brake Assembly - 10" - 3,500 lbs item # 23-27. The complete kit is the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs item # 23-26-27.
    view full answer...
  • Replacement Dexter Trailer Brake Kit To Replace Dexter 36-19 Brake Assemblies
    The Dexter Electric Trailer Brake Kit # 23-26-27 contains both the left and right hand brake assemblies that replace your 36-19 assemblies on your 2017 Keystone Passport. Yes, you can replace them with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469, which I recommend for the ease of maintenance as well as the improved braking. Since these are self adjusting that means that you have more consistent braking as the pads wear and you will not have to constantly adjust your...
    view full answer...
    Image 1 for
  • Picking Out Brake Assemblies for Camper Trailer
    I can help you find the right assemblies, but I do not know exactly which ones you have on your trailer. To pick out the correct brake assemblies for your trailer you need to know a few things. You will want to measure the inner diameter of your hub/drums and the depth of the drums to determine what brake assembly dimensions you need. For example the part # 23-468 is a 10 inch by 2-1/4 inch thick brake assembly. You also want to determine what the bolt pattern is of your assembly mounting...
    view full answer...
    Image 1 for
  • Troubleshooting Dexter Electric Brakes Overheating on Rear Axle of Tandem Axle Trailer
    It sounds like you have already done a lot of troubleshooting and your brakes are adjusted properly each time. You certainly shouldn't have to be adjusting brakes like the # 23-26-27 every 300-500 miles. The first thing I would check is the wiring for your rear brake assemblies. Make sure the power and ground wires have a good connection. The other thing I think this could be is the axle/spindles. It is possible you have a bent spindle or axle which could result in suspension issues and...
    view full answer...
  • Can Self-Adjusting and Manual Adjusting Braking Assemblies Be Mixed
    It is not advised to mix self-adjusting and manual adjusting braking assemblies on the same axle. It is also not advised to use self-adjusting braking assemblies on one axle and manual adjusting braking assemblies on the other. The result of doing so would be uneven braking pressure which would result in control issues as well as safety concerns. If you have a 3,500 lb axle or multiple 3,500 lb axles on your trailer then you will need to use the Dexter Nev-R-Adjust Electric Trailer Brake...
    view full answer...
  • Electric Drum Brake Assemblies to Replace Hydraulic Brakes on 1993 Jayco Trailer
    I have attached a very helpful article on adding electric drum brakes to a trailer for you to check out. To determine the correct electric brake assemblies that will fit your 1993 Jayco Trailer, you will need to know the weight capacity of the axle, the bolt pattern of the brake mounting flange, and the physical size of the brake assembly you are replacing. For example, the Dexter Electric Trailer Brake Kit # 23-26-27 referenced in your question is for 3,500 pound axles, measures 10...
    view full answer...

Do you have a question about this Trailer Brake?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee David F
Installed by:
David F
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video by:
Dustin K
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Written by:
Alexander C
Employee Ryan F
Written by:
Ryan F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.