Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
Updated 05/13/2024 | Published 04/13/2024
Products Featured in This Question
Question:
Hello, Need some help identifying my Dexter Axle so I can find bearings inner, outer, grease seals and possibly hub. Dexter Axle P-12 SLR, 6 stud, difficult to read but S/N D8037883 I believe. Also difficult to read but looks like 3500lb. Thanks so much for your help! Best..
asked by: Gregg D
Expert Reply:
You are correct that is a 3,500 lb axle. If you want a bearing kit the # BK2-100 you looked at is the right one. This comes with a # L44649 outer and # L68149 inner bearing along with a # 58846 (10-19) grease seal. If you want a replacement idler hub you can use the # AKIHUB-655-35-K or for a hub and drum assembly the # AKHD-655-35-K. Both of these have a 6 on 5-1/2 bolt pattern.
Gregg D.
5/13/2024
Hey again Robin, I'm looking for Buddy Bearings for this same axle. Also the center wheel caps for use with the Buddy Bearings. Thanks for your help! Best..
Robin H.
5/13/2024
Helpful Links
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Tell the Weight Rating of a Trailer Axle
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: Review of Roadmaster Trailer Suspension Parts - Bushings - RM47GR
- Q&A: Recommended Tire Size for Upgrading Tires From 7.00-15LT on My Horse Trailer
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Shop: Kenda Karrier KR53 ST225/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 6 on 5-1/2
- Search Results: 25580 / lm67048 trailer hubs and drums
- Search Results: bearing lm67048 trailer bearings races seals caps
- Video: An In-Depth Look at the Trailer Idler Hub Assembly for 3,500-lb Axles
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Video: An In-Depth Look at the Steel Mod Silver Trailer Wheel
- Video: Step-By-Step Installation for the etrailer Hub Bearing Kit - Utility Trailer
- Shop: Optronics LED Trailer Clearance and Side Marker Light w/ Reflex Reflector - 6 Diodes - Amber Lens
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Search Results: bk2 100 bearing kit
- Search Results: morryde equalizer
- Search Results: 58846
- Search Results: morryde
- Search Results: 1980a
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Q&A: Recommendation To Replace Slipper Spring And Bushings
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-655-35-K
- Q&A: Can Different MORryde X-Factor Crossmembers Be Used On The Same Trailer?
- Q&A: Can I Change a 5 on 4-1/2 Drum With A 5 on 5 Drum For A Trailer With 3,500 lb Axles
- Q&A: Replacement Leaf Springs For A Tandem Axle Trailer With Flattened Leaf Springs
- Video: Let’s Check Out the Replacement Trailer Hub Bearing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: In-Depth Review of the Easy Grease Trailer Idler Hub Assembly for 3.5K Axles
on Trailer Bearings Races Seals Caps
Gregg
4/14/2024
Thank very much Robin!!