Will Pre-Greased 6-Lug 3,500 lb Trailer Axle Hub/Drum Easily Fit In Place of 5 Lug Hub
Updated 04/15/2025 | Published 04/06/2025
Question:
I’d like to replace the 5 lug drums with this 6 lug: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10inch Diameter - 6 on 5-1/2 - Pre-Greased This is for a new Casita with 5 lug. 3500 Dexter torsion axle. Is this a bolt on swap? Thank you
asked by: Steve S
0
Expert Reply:
Hey Steve, yes the Trailer Hub and Drum Assembly # AKHD-655-35-K would easily swap onto the spindle of your trailer once you remove the old hub.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Lippert Brake Drum and Hub Kit - 3,500 lb Axles - 10" Diameter - 5 on 4-1/2 - 1/2" Studs
- Q&A: Trailer Hub/Drum to Replace Damaged UFP HD-1377-10
- Q&A: Recommended Replacement Hub and Drum Assembly Kit for a UFP HD-1377-10 Hub and Drum
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Video: Let’s Check Out the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles
- Q&A: Can The UFP Hub/Drums HD-1377-10 Be Resurfaced Or Will They Need Replaced?
- Q&A: Correct Replacement Idler Hubs for Champion Boat Trailer
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Video: Complete Breakdown of the Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Shop: EZ Lube Grease Caps with 1.99" OD - Fits 7" and 10" x 1-1/4" Dexter Hubs - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Trailer Hub Replacement for Axletek BD-65535
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Most Popular Wheel Bearings
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
Steve S.
4/15/2025
Thank you Sir!