Does etrailer Hub for 3,500 lb Trailer Axle AKHD-655-35-K Come Pre-Greased
Updated 04/07/2025 | Published 04/04/2025 >
Question:
Part AKHD-655-35-K hub 6x5.5” says it’s pre greased. Does that mean the bearings are pre installed in the hub or something else. The video said you need th pack the bearings.. what does pre greased mean and why is it cheaper than the other part 84656UC3 6x5.6” which is not pre-greased?
asked by: Craig S
Expert Reply:
Hey Craig, sorry about the confusion but the Trailer Hub and Drum Assembly # AKHD-655-35-K that you referenced does come pre-greased and ready to install. The bearings are in the hub, they have been packed with grease, and there's a grease seal installed as well so it will be a super easy and clean install. Pricing is hard to pin down but different brands offer products to us at different rates so sometimes it doesn't always seem logical that more money is better.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-655-35-K
- Video: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles: The Breakdown
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Search Results: lynx
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Suspension Enhancement
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Recommended Hub and Drum Assembly with 6 on 5-1/2 Bolt Pattern for 2-132, 3,500 Pound Axle
- Q&A: Replacement Hub for AxleTex BD2-545 that Has 6 on 5-1/2 inch Bolt Pattern
- Q&A: Replacement Trailer Hub Assemblies For 3,500LB Axles Using L68149 Inner and L44649 Outer Bearings
- Q&A: Will Easy Grease Hub and Drum AKHD-655-35-EZ-K Fit A 2016 Lippert 3500lb Axle?
- Q&A: Replacement Hub and Drum Assembly for 3,500 Pound Axle with 6 on 5-1/2 Bolt Pattern
- Q&A: Replacement 3,500 lb 10 inch Brakes and Hubs for Aztec Trailer
- Q&A: Hub/Drum With a 6 on 5.5 Bolt Pattern for a 10 x 2.25 Electric Brake
- Shop: Replacement Trailer Axle Spindle Retainer Kit for Dexter Axles Manufactered After June 2002
- Shop: Norcold Polar Full RV Refrigerator w Freezer - 8.2 Cu Ft - 12V - Stainless Steel - Left Hand Doors
- Search Results: timbren
- Video: Dexter Nev-R-Adjust Electric Trailer Brakes Review
- Video: Timbren Rear Suspension Enhancement Step-By-Step Installation - 2022 Ford F-350 Super Duty
- Video: Ultimate Overview of the Shocker Hitch HD Air Cushioned 2-Ball Mount
- Search Results: bump stop
- Search Results: brake adjustment tool
- Search Results: 23~468~469
- Search Results: hub
- Search Results: dust cap installation tool


Craig
4/6/2025
Thanks. I ordered the parts. Which brand bearings are included? Redline or something else?