Replacement For A Truryde RVD-H-65535 Hub
Published 10/24/2023
Products Featured in This Question
Question:
I am looking for a replacement hub for a Trueryd RVD-h-65535 like in the attached picture. Any help is much appreciated!
asked by: Rob F
0
Expert Reply:
Thanks for the Picture. What you have there is a 6 on 5-1/2" hub for a 3,500 lb axle. We do have a replacement hub for your Truryde RVD-H-65535 hub. The correct replacement will be part # AKHD-655-35-EZ-K. This will include the hub, bearings, seals, races and lug nuts.
expert reply by:
Jesse M
0
Truryde RVD-H-65535 Hub
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: led bar
- Search Results: crimp connectors wiring
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Search Results: 3500 lbs axle trailer brakes
- Search Results: 10 inch wheel trailer brakes
- Shop: Dexter Bearing Kit for 4.4K Axles - Inner and Outer Bearings LM67048/L68149
- Shop: Lippert Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K Lippert Axles
- Shop: Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Shop: Trailer Hitch
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: 8~285
- Search Results: 6 on 5~1/2 inch trailer hubs and drums
- Search Results: electric brake wire connectors
- Article: Trailer Wiring Diagrams
- Q&A: What Ohms Should Trailer Brake Magnets Be?
- Video: What to Know About the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles
- Video: Grease Seals 10-36 (pair) Feature Review
- Video: Hands-On with the Electric Trailer Brake Assembly
- Q&A: Will Out of Adjustment Trailer Brakes Cause a Fault Code on the Electric Trailer Brake Controller
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Troubleshooting Error Codes SH and OL on a Tekonsha Prodigy Brake Controller
- Q&A: Replacement Double-Lip Seal for Lippert Part 122088 with 2.250" ID and 3.376" OD
- Q&A: What is Difference Between TruRyde and Timken Grease Seals
- Q&A: Comparing TruRyde 10-36 Grease and Dexter 10-63 Oil Seal
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Video: Timken Bearing Kit Installation - Enclosed Trailer