This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. For electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Average Customer Rating: 4.4 out of 5 stars (36 Customer Reviews)
This hub-and-drum assembly fits 3,500-lb E-Z Lube axles with #84 spindles. For electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.Great drum kit, Have used many of them with great success.
Broken and missing parts. Whole assemblies not delivered. 2 of three delivered are unusable. Would recommend not buying.
Sierra K - 07/19/2022etrailer was easy to work with and gather information for my horse trailer!! The information and selection was the best source I could find! The product was shipped and tracked right on schedule and actually arrived soon than I had expected.
These specific parts fit perfectly to a 2000 horse trailer that I had little information on to start with. The install was very straight forward, if I purchased the "manual" adjust.
Excellent product and excellent service. My order showed up quickly with everything packaged well.
Delivery was 2 days ahead of what I expected. All the parts were exactly as described. Fit my spindle like a glove and we had the trailer on the road in less than 45 minutes. The website is great for giving you useful information that you are ordering the exact part you need. Everything from bolt centers to bearing numbers. In my experience, there is not a better vendor for these components.
Bob W - 01/25/2019Glad etrailer had this in stock! With all the campers out there, you would think this would be more available. Had a major incident on the highway and had to piece the axle back together with a 10" 5 lug and new wheel and tire to get back on the road. etrailer had this at my home waiting for me when I got back off of vacation!
I used these to replace odd-ball 5 on 5.5 hubs. I hate that bolt pattern. So hard to find good rims because hardly anyone uses them. In fact, I did this swap shortly after buying the trailer (read, tires and wheels were still in new condition). The dealer I bought them from was reluctant to give me much money for them. He told me that even he would have a hard time selling them because they were such an odd-ball bolt pattern. As he said this, I'm looking around at his lot of trailers, ALL with hubs with this same bolt patter. Ugh!
I wanted to upgrade the rims on my trailer, and upgrade the tires. So, went with this pattern (on two trailers). Quality product. Would def. buy again.
This kit went on the axles without issue. I have been running it a year and temps are low and turns fine. The problem is I used the ez-lube covers that came with the kit. One year in the Arizona sun and all four rubber inserts dried up and crumbled out of the hub cover. Use the all steel caps that come with the kit and not the ez-lube ones included in the kit. I just ordered new all metal covers and will have to remove the bearings and reseal.
Disappointed washers were not included also that bearings are mfg in china
Heather A - 06/27/2021Greatest service. I ordered the wrong hub kits for my tandem trailer. Realized the mistake the following day talked with Bridget and she emailed me the return paperwork. Then I ordered the correct parts, got them when promised. We were able to start our trip in time. The drum kits were complete except for the outer "D" washer. Just used the original ones. No problem. My hero.
Very good hub upgrade. Could have probably been even better if I´d opted to install fresh electric brakes too. Need to figure out the part number for the appropriate ones and do them too. Hubs themselves seem perfect.
My trailer drum kit arrived on 8/14/17 opened it up and started going thru my part and drums look good but Dexter tape the bearings too the the nose of the drum and both bearing sets and parts where crushed, called etrailer and after talking to etrailer on 8/14/17 they are sending me replacement part. So I'm happy they have good customer service they need to talk to dexter about how they package their product. How they pack their product is a direct reflection on etrailers.
The hub, drum, and bearings are worked fine so far. The only minor complaint was there was no thrust washer included. This is the washer that sits under the crown nut. Luckily, I was able to use the old one.
Good quality product and fast delivery. Used on double axle trailer to haul John Deere tractor. Easy install but packaging could have been better because package came very beat up.
easy install, products just as described. The installation videos are why we are able to buy these products ourselves and save money, thank you.
As always A+ service
Only good things to say about etrailer and all of the products I've bought over the years. All top quality and easy well laid out website.
Product fit as designed. I used the old Castle Nut and had to purchase a new cotter pin. I would suggest this kit include a new Castle Nut and Cotter Pin; otherwise the product was excellent and installation was easy.
All parts good but have had to replace three of the four backing plates that were loaded they just fell apart
everything about this product was right on !! fit, finish and so far after 1 year of use durability is flawless
This is a fantastic replacement for older hubs or for those who don’t want to replace bearing races in existing hubs. Very good price for the quality. I replaced all four of mine, well worth the money!
Excellent old school service! The kind you don't see much anymore, especially online. I used Chat for some detailed questions. Quick response and the item arrived promptly. I find the details available online, and search functions to be great, made it easy to find my part.
Just what I needed for a livestock trailer. Fit perfectly and was easy to install.
very satisfied. installation was as smooth as one could expect
Very impressed with the products and the company. We received our order quickly and the customer service was awesome!
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.