bing tracking image
  1. Accessories and Parts
  2. etrailer
  3. Trailer Brakes
  4. Electric Drum Brakes
  5. Brake Assembly
  6. 10 x 2-1/4 Inch Drum
Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
etrailer

Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs

Part Number: AKEBRK-35R-SA
In Stock
$46.63
Accessories and Parts
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

Need help with installation?
Locate installers near me
Self-adjusting passenger's-side electric trailer brake measures 10" x 2-1/4". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Fits 13" to 15" wheels. 1-800-940-8924 to order etrailer accessories and parts part number AKEBRK-35R-SA or order online at etrailer.com. Free expert support on all etrailer products. Great prices and Fastest Shipping for Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (2113)
  • Q & A (0)
  • Photos

etrailer Accessories and Parts - AKEBRK-35R-SA

  • Trailer Brakes
  • Electric Drum Brakes
  • Brake Assembly
  • 10 x 2-1/4 Inch Drum
  • etrailer
  • RH
  • Self Adjust
  • 3500 lbs

Self-adjusting passenger's-side electric trailer brake measures 10" x 2-1/4". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Fits 13" to 15" wheels.


Features:

  • Electric brakes are easier to install and offer more user control than hydraulic brakes
    • Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
  • Automotive-grade friction material is molded to brake shoes
    • Pads are fully bonded - not riveted - to shoes for long life and more braking torque
    • Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding
  • Self-adjusting brake does not require periodic manual adjustment like standard brakes
    • Fine-tooth brake adjustment gear allows for a more precise setting
  • E-coated backing plate resists wear and corrosion
  • Adjuster plugs (included) cover access holes to keep dirt and grime out of the assembly and off of the shoes
  • Brake mounting bolts are included
    • Nuts and lock washers (BRKH10BS) sold separately
  • QAI and CSA certified


Specs:

  • Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
  • Configuration: right hand (passenger's side)
  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange bolt pattern: 4 bolt
  • Wheel size: 13", 14", and 15"
  • Axle rating: 3,500 lbs
  • Limited 1-year warranty


Self-Adjusting Brake Doesn't Require Routine Adjustment

Standard electric brake assemblies require manual adjustment of the brake shoes over time to provide longer-lasting and more efficient braking performance. With self-adjusting brakes, the brake shoes are always properly aligned, so there's no need to manually adjust the brakes after the initial adjustment. As a result, you get optimum performance without having to take the time to continually perform this type of maintenance.


Thoroughly Tested for Safety

This brake assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This brake assembly underwent extensive testing to measure stopping distances when braking. This brake has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.


Automotive-Grade Friction Material

Each shoe on this brake assembly is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.


The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.



12-796 AxleTek 10" x 2 1/4" RH Self-Adjusting Electric Brake Assembly - Passengers Side - 3.5K Axles

Compare to Dexter 23-469





Customer Satisfaction Score:


Customer Reviews

Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs - AKEBRK-35R-SA

Average Customer Rating:  4.7 out of 5 stars   (2113 Customer Reviews)

Self-adjusting passenger's-side electric trailer brake measures 10" x 2-1/4". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Fits 13" to 15" wheels.

by:

I ordered an electric trailer brake assembly to replace a damaged one on my 14 foot cargo trailer. The fit was perfect and the one I ordered was self-adjusting.



by:

Bought a Hayes 3500 lbs axle that sat in the dirt for years and the pads nearly fused to the hubs. Well worth the money for piece of mind. Only suggestion is to pick up the 7/16-20 bolts with your order (eTrailer, why not just add it to the kit?)

Made my trailer project much easier.

Thank you much!



by:

Installed a complete set of 4 of the E trailer self adjusting brakes on my 2002 Doolittle trailer with Dexter 3500 axles....the pre assembled units went on effortlessly, and worked perfect.....would highly recommend them....thanks



by:

Perfect fit. A no hassle solution to replacing your brakes. It all comes as one component - minus the mounting hardware. I would have given it 5 stars if it included an absolutely needed part: the four 7/16 x 20 threaded nuts. It does tell you that it’s not included. I figured I could get them locally but couldn’t. Local stores have threads all around the 20, but not the 20. I was wrong so I had to put off installing until I could come back and order them from etrailer. Why not just add them to the brake assembly and raise the price of the assembly by $[XX]? If not for that, I certainly would give it a 5-star rating.



by:

on time as expected



by:

Appear to be quality metal; matched up to my Dexter axles and hubs, no issues.
Arrived a couple days after the break kits and hubs; caused a small delay but no issue for me since did not need the trailer currently.



by:

It pays to order from the experts! I knew something was loose in there so I ordered the works and everything was right. Thank You



by:

Got my electric breaks in and put them on my camper,( new parts should come with new hardware) easy online ordering and easy tracking, I will start ordering all my parts here.



by:

So far so good. I ordered a bunch of stuff from several sites th night I got my brake parts. Etrailer was the fastest order forfillment and the first on my porch by far. Everything fit like it was supposed to and this far seems to be working well. Can’t ask for more then that. If they sold a 11/16 ratchet wrench with these things would have gone lots faster.



by:

I am so glad I Purchased the entire brake assembly instead of individual parts. This brake assembly is better than the original since it is self adjusting and I’ll never have to adjust my brakes again. It was a snap to install thanks to etrailer.com video instructions. I highly recommend this product

David A.

8/20/2020

Good quality brake parts. I installed them on my travel trailer and the brakes work great!



by:

Install easy, your videos are good

Rick

11/26/2021

Brakes and new wheel bearings have worked out great!



by:

Very happy with etrailer, great parts and service plus I saved a bunch of money. Highly recommended.
Instead of refurbishing nine year old drums, shoes ,etc. I made an easy change out for the price of a fancy dinner. Thanks et



by:

Was the exact fit for the 3500 pound Lippert axles on my toy hauler. Easy installation and works great!



by:

We use these brakes on a heavy loaded Interstate 7,000 lb.trailer, 16 foot, high top, walk in cargo trailer that has dual axles. The route is between southern Missouri, over the Rocky Mountains passes and over the Cascade Mountain Passes into the Pacifice northwest and back to Missouri...over 5,000 miles round trip. Towed by Dodge Dakota pickup truck, I REQUIRE brakes that are reliable, self adjusting, and function together in a consistent manner. These brakes replaced manual adjustment brakes of which enroute wear required multiple manual adjustments along the side of the road to safely cross high mountain passes. The difference between manual and self adjusting brakes and the consistent/straight stoping power of the self adjusting brakes is impossible to overstate. These self adjusting brakes were very easy to install, a mere bolt on job. I literally trust our lives to these brakes....and recommend them with great confidence with tens of thousands of miles of use.



by:

Fantastic quality, 0 complaints!
Tested
and work perfect. Would absolutely recommend. I’ll be sure to use etrailer for my trailer and hauling needs.



by:

Fits perfect - thanks for all the help with choosing the correct part. I was surprised there wasn't nuts and washers for the bolts. But am happy with the results.



by:

They will need bearings regreased. They were not shipped with anywhere near enough grease to make them last around the block. Which means you’ll have to carefully remove the rear seal or buy new ones to grease the inside bearing. And all the hub center caps would not fit and had to roll the edge with pliers a little to get them to tap into the hub.



by:

I'm happy with my new set of electric brakes for my vintage 1928 Wilderness two-axel travel trailer. Fast shipping and helpful customer service... Thanks



by:

Ordered brakes for my trailer shipping was fast installation was a breeze took about 30 minutes per wheel after watching the video this is the second time I have bought from E Trailer and will continue to buy

Richard

12/15/2017

Love the parts and price will buy from etrailer again



by:

No problems after 5,000miles



by:

etrailer found the parts I needed and shipped them super fast. The self adjusting brakes were easy to install and work great but didn't come with new wire connectors.

Etrailer Expert

Victoria B.

8/16/2019

The brake assembly does not come with new butt connectors for installation. If you are replacing the brakes on a single axle trailer, I recommend the heat shrink butt connector kit # DW05745-5 that includes 5 connectors. If you are replacing the brakes on a dual axle trailer, I recommend kit # DW05745-10 that includes 10 butt connectors.



by:

Good price,delivery and fit. Self adjusters will hopefully save me the job of getting my Airstream off the ground to adjust the brakes in the future. So that makes me a "Happy Camper".

Ken S.

6/4/2017

After about a year and 10k miles the brakes work just as they should without having to manually adjust them and I am still a Happy Camper!!



by:

Needed new brake hubs for my car trailer. EZ installation and work great on my 7,000 lb trailer.

John J.

10/23/2017

I am very happy to report STILL, I am very happy, actually, 110 happy with the brake kit wiring kit I got from yous.I have had zero issues with my car trailer, and have not seen issues with rust, ineffective braking.So I appreciate your products, and will be back for sure!



by:

Part shipped promptly. Installed and always had trouble with brakes adjusting to tight and making hub run really hot. Adjusted 3 times and would always tighten back up and run hot. Asked about warranty. Would have to ship back on my dime as rep said and etrailer would determine if part was bad. My question was how they determine part issue when is not installed as just looking at brake hub it looked ok. Just ordered a new Dexter no adjust brake hub and hoping for better results. Also found a equal part at local auto part store for same money and no shipping fee. Had I had know auto part store stocked brake hub I would and will buy from them. So if you have time shop around.....



by:

I received my brakes quicker than expected and they were an exact fit. Installation was easy. I have a 7000 lbs travel trailer with 2 axles. These brake assemblies are a great value since the magnet alone cost $20. The brakes self adjusted after a few trips around the block. This is the only way to go if you need to replace your brake shoes or magnets. This is a quicker and easier way to go. Don't forget to purchase the nut to mount them with. They don't come with replacement nuts. I won't have to touch the brakes for another 5 years or so!


25
1954
Show More Reviews

See what our Experts say about this etrailer Accessories and Parts

  • Replacement Trailer Brake Assemblies For 3,500-lb Axles That Are 10-1/4" In Diameter And 2-1/4" Wide
    Yes, the Electric Trailer Brake Assembly # AKEBRK-35L-SA for the left side, and the Electric Trailer Brake Assembly # AKEBRK-35R-SA for the right side, is the correct replacement brake assemblies for your trailer with 3,500-lb axles that measure 10" in diameter, and 2-1/4" wide. You could also buy these brake assemblies in a kit that contains the pair with the Electric Trailer Brake Kit # AKEBRK-35-SA.
    view full answer...
  • Can Hydraulic Brakes of Demco Tow Dolly be Converted to Electric Brakes
    Since Demco uses 3,500 drum brake assemblies part # DMSB24429M and # DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part # AKEBRK-35L-SA for the left hand side and # AKEBRK-35R-SA for the right hand side. To wire these up you'd just need 10 gauge wire like the part # 10-1-1 which we sell by the foot. Then to add a 7-way the easiest way to do that is with the 7-way junction box # e99011.
    view full answer...
  • Self-Adjusting Electric Trailer Brakes to Replace Dexter 10x2-1/4" 36-19 Brake Assemblies
    We do have self-adjusting electric trailer brakes that will fit in place of your manual adjust 10 x 2-1/4 brakes. You can use our house brand, # AKEBRK-35R-SA for the right and # AKEBRK-35L-SA for the left. If you want the Dexter brand then use # 23-469 for the right and # 23-468 for the left. I have linked some video reviews of these brakes for you.
    view full answer...
  • Recommended Replacemenet Self-Adjusting Brakes for a 2004 Featherlite Utility Trailer
    For your 2004 Featherlite Utility Trailer, I recommend checking out the Electric Trailer Brake Assembly # AKEBRK-35L-SA for the left hand side and the Electric Trailer Brake Assembly # AKEBRK-35R-SA for the right hand side. These braking assemblies are going to be the most economical self-adjusting brakes we have, has a 3.5K axle rating capacity, will work with 13", 14", and 15" wheels, and measure 10" diameter x 2-1/4" wide. Attached are a couple of product review videos for you to check...
    view full answer...
  • Replacement Brakes and Hub and Drum Assemblies that Use L68149 and L44649 Bearings
    The fact that your existing hubs use bearings L68149 and L44649 indicates that the trailer has 84 spindles and the axles are more than likely 3,500 pound axles. The bearing numbers is how we identify things like the correct hubs and capacity so you are good to go. The bolt pattern the wheels use to secure to the hub and drum assembly is the other key factor. I have included a link that explains how to measure for bolt pattern. The hub you asked about, # AKHD-5475-35-K, has a 5 on 4-3/4...
    view full answer...
  • Matching Brake Assemblies and Mounting Bolt Pattern of 10 x 2-1/4 Inch Trailer Brake
    The # AKEBRK-35L-SA would be the left brake assembly and # AKEBRK-35R-SA would be the right side matching self-adjusting brake assemblies compatible with the 10 x 2-1/4 inch brake drums used on a typical 3500 lb axle. The price we charge for them is based on what our vendors charge us and what the others in the market are asking. The mounting studs on the brake backing plate measure 2-7/8 inches apart, center to center.
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hub and Drums for 3,500 lb Trailer Axle
    We probably have the hubs that would fit your spindle but you need to first make sure the spindle of the wheel that fell of while driving isn't damaged and in need of replacing. If the bearings were so bad the hub and wheel came off most likely the spindle is totally wrecked. The Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K is a 3,500 lb rated hub and drum with a 5 on 4-1/2 inch bolt pattern which comes with bearings. The brake assemblies part numbers # AKEBRK-35L-SA and # AKEBRK-35R-SA...
    view full answer...
  • Could Trailer Brakes be Added to 2006 Big Tex 35SA
    If the trailer has brake mounting flanges like yours does you can add brakes relatively easy. It will be a matter of removing your idler hubs, installing assemblies to the flanges, installing hub/drums instead of the idler hubs, and then running the brake output circuit from them up to the front of the trailer. We definitely can help you out but I'll need more info about your trailer to determine what exact parts you'd need. I attached a help article that covers everything you'll need to...
    view full answer...
  • Is It Normal for Left and Right Trailer Brake Assemblies to be Different Brands
    That's not an ideal situation but I can understand someone wanting to just replace a single assembly instead of replacing both if they couldn't get a match. So your best option would be to replace the right hand side with the part # AKEBRK-35R-SA so that everything matches.
    view full answer...
  • How to Pick Out Replacement Brake Assemblies for a Snowmobile Trailer 2010 Rough Rider
    When it comes time to replace the shoes of trailer drum brakes it is almost always just easier and more cost effective to just replace the assemblies. To determine what assemblies you would need is pretty easy. You need to first determine what size you have. You can do this by measuring the inside dimensions of the hub on your trailer once you remove it like in the picture I attached. I attached a link to a page that has all of the assemblies we carry. You will need to first select the...
    view full answer...
    Image 1 for
  • Replacement 10 inch Trailer Brake Assemblies for Bayliner Boat Trailer
    For ten inch trailer brake assemblies we have the etrailer pat # AKUBRK-35R for the right hand side and part # AKUBRK-35L for the left hand side. Regardless of what brand assemblies you have installed currently these will replace them and work great.
    view full answer...
  • Brake Assemblies that Fit Trailer Hubs # AKHD-655-35-EZ-K
    The correct brake assemblies to go with the trailer hub part # AKHD-655-35-EZ-K you mentioned are the part # AKEBRK-35L-SA for the driver side and part # AKEBRK-35R-SA for the passenger side. These actually don't contact the wheel of the axle at all so the wheel size does not matter with these. The hub you mentioned is what connects to the wheel and is compatible with 16 inch trailer wheels.
    view full answer...
  • Is Brake Assembly AKEBRK-35L-SA the Left Assembly of AKEBRK-35-SA
    Yes the trailer brake assembly part # AKEBRK-35L-SA is the left hand/driver side brake assembly that comes with brake assembly set part # AKEBRK-35-SA. The right hand side is # AKEBRK-35R-SA.
    view full answer...
  • Recommended Replacement Brake Hub and Drum Assemblies for AL-KO 8490 Brake System
    I can definitely help you replace your AL-KO 8490 hub and drums that are worn. These hub and drum assemblies are for 3500 lbs axles, and there are some great replacement options for you. I recommend the etrailer.com Hub and Drum Assembly # AKHD-545-35-K. This hub and drum uses # L68149 inner bearing and # L44649 outer bearings. This assembly includes the bearings, races, grease seal, grease cap, and lug nuts. This has a 10 inch diameter and a 5 on 4-1/2 bolt pattern. For a 10 x 2-1/4...
    view full answer...
  • Replacement Brake Assemblies for a Trailer with 3,500 Pound LCI Axles
    Yes, we do carry replacement brake components needed for your brake setup on your trailer as long as your brake mounting flange is the standard 4 hole design like # 4-35. For your 3,500 pound axle trailer, I recommend the etrailer.com 10-inch Self Adjusting electric brake assemblies # AKEBRK-35L-SA (left hand) and # AKEBRK-35R-SA (right hand). Self adjust electric brakes will automatically adjust to provide optimum performance and braking power. If you need to replace the hub and drum...
    view full answer...
  • Brake Drum and Assembly Recommendation to Replace Drums Markes 8-247
    The Trailer Hub part # AKHD-545-35-G-K would be the perfect choice for a hub and drum assembly since it is a different brand, but cross references to the same hub and drum that you currently have. It is galvanized for corrosion resistance. For right hand electric brake assemblies you would want the part # AKEBRK-35R-SA, and then for the left hand side you would want the part # AKEBRK-35L-SA.
    view full answer...
  • Difference Between Buying Electric Trailer Brake Kit Set Versus Buying Each Brake Individually
    Electric Trailer Brake Kit # AKEBRK-35-SA comes with both the right and left brake assemblies but also new nuts and washers. If you get the brakes individually the nuts and washers are sold separately. If you do not need the nuts and washers then getting the brakes by themselves # AKEBRK-35L-SA and # AKEBRK-35R-SA would safe you a little bit.
    view full answer...
  • Replacement Electric Trailer Brake Assemblies For a 2018 Jayco Jay Feather 29QB Travel Trailer
    You will need the Electric Trailer Brake Kit # AKEBRK-35-SA for your Lippert axle on your 2018 Jayco Jay Feather 29QB travel trailer. These are sold as a set with one Left # AKEBRK-35L-SA and one Right # AKEBRK-35R-SA assembly. So be sure to get 2 kits for both axles on your Jayco.
    view full answer...
  • Brake Controller And Brakes Recommendations For 2010 Kia Sedona And Trailer
    Thank you for the spec sheet on the axle you have on your trailer. I spoke with my contact at Dexter and they told me that you do not need to replace your axle, you can just upgrade the one you have. They told me that you have the brake mounting flange mounted on your axle so what you will want to do is add a new hub and drum, the brakes, and wiring for your trailer, and you should be good to go. The hub and drum I recommend is the etrailer.com Trailer Hub Assembly, part # AKHD-545-35-G-K....
    view full answer...
  • Recommended Self-Adjusting Brakes For 3500 lb Axle With 16 Inch Wheels
    I recommend the Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs, # AKEBRK-35R-SA, and the # AKEBRK-35L-SA for the left hand side. These self-adjusting brakes don't require regular maintenance to adjust the brake shoes to work properly. There is also no break in period needed following the initial adjustment. There are adjuster plugs included that cover the access holes to keep out dirt and grime. These brakes use automotive-grade friction material for...
    view full answer...
  • Replacement Adjuster Springs for Drum Brakes
    We do sell just the adjuster springs for drum brakes; you can see the springs for 10-inch electric and hydraulic drum brakes on the linked page. For a 10-inch AxleTek electric drum brake you can use Dexter part # BP08-070 which fits both 10-inch and 12-inch brakes.
    view full answer...
  • Trailer Brakes Recommendations for a 3,500 lbs Boat Trailer Axle
    You have the standard brake mounting flanges on your axle. If you want to get really technical, the bolt holes should actually measure about 1/16 larger than 2-3/4. That is the standard dimension for 3,500 lb axles. If you are looking for hydraulic brake assemblies, I strongly recommend the 10 Inch Free-Backing Dacromet Brake Assemblies, # AKFBBRK-35L-D for the left hand and # AKFBBRK-35R-D for the right hand. Free-backing brakes will not lock up when you are backing up the trailer and...
    view full answer...
  • Can Hydraulic Disc or Electric Drum Brakes Be Added to Demco Tow Dolly
    It may indeed be possible to add brakes, like the Titan hydraulic disc brake kit # T4843300 you referenced, to your tow dolly but a few things need to be checked. Generally it is preferable to use electric drum brakes on a tow dolly since their power can be adjusted by the brake controller that would be installed in the tow vehicle. A disc actuator requires the forward-momentum of the dollied vehicle to engage the brakes, and this would make it essential to match the actuator to the weight...
    view full answer...
  • Parts Needed to Add Electric Brakes to a Dexter 3,500 lb Axle
    For replacement hub drums that will fit your Dexter 3,500 axle you would want the part # AKEBRK-35R-SA. This is an EZ lube hub that also has the 5 on 5 inch bolt pattern you need that will bolt right up to your spindle. For brake assemblies you would then need the part # AKEBRK-35L-SA for the left hand side and then # AKEBRK-35R-SA for the right hand side. I attached a picture that shows how to wire up both axles for you to check out as well.
    view full answer...
    Image 1 for


< Previous
123. . .11



Do you have a question about this Accessories and Part?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.