Looking for Replacement Hub/Drum for 2025 Timberleaf Pika
Updated 01/19/2026 | Published 01/18/2026
Question:
I have a tear trailer 2025 Timberleaf Pika with the Timbren metric tonn axle less suspension. 6 on 5.5inch bolt pattern. I believe it is a 10inch drum. I want to carry a loadedinch spare brake drum assembly bearings lubed and in place, seals installed, etc. for just in case. Would this one work? Ive had a hub go bad on a different trailer far from home, and having a loaded spare was worth its weight in gold.
asked by: Paul D
(click to enlarge)
Expert Reply:
Hey Paul, if you have a 10 inch drum on your Timbren Axle Less setup the correct hub/drum replacement would be the part # AKHD-655-35-K that you referenced. This is very likely what you have but I would still measure what you have again to be sure and let me know! I would be shocked if it's something different but it sounds like you have the 2,000 lb HD Axle Less setup which actually uses 3,500 lb hub/drums and brake assemblies.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: aluminum trim
- Search Results: firestone 2445
- Search Results: metal valve stem
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: ramp door springs
- Search Results: 56494
- Search Results: 51126
- Search Results: re34fr
- Shop: Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle
- Shop: Bottom Rail Trim for Trailers - 93-1/2" Long x 1/2" Tall x 2-3/4" Wide
- Q&A: Will the 800 lbs Replacement Spring Bar Upgrade a 6,000 lbs Reese Pro Round Bar WDS?
- Q&A: Determining Correct Replacement Hubs for Dexter 8-286 Hubs on 2,500 Pound Axle
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Hydrastar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi
- Shop: etrailer Trailer Tool Box - A-Frame - Aluminum - 6 Cu Ft - 34" Long - Matte Black
- Shop: Empire Faucets RV Kitchen Faucet - Dual Lever Handle - Brushed Nickel
- Q&A: Recommended Trailer Tire Size and Load Range for a 14K Tandem Axle Horse Trailer
- Shop: Trailer Hitch
- Q&A: Wheel PSI Rating for Dexstar Steel Spoke Trailer Wheel - 14" x 5-1/2" Rim
- Q&A: What Is The Difference Between The Furrion Chill Cube FR27TD And FR59TD?
- Q&A: Replacement Remote for a Rough Country 9,500 lb Pro Series Winch
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Hub with Integrated Drum - AKHD-655-35-K
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Video: What to Know About the Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles
- Q&A: Adding Electric Drum Brakes to Trailer with Timbren Axle-Less Suspension System
- Video: Timbren 1/2" Spacer For Raised Frame Vehicles Review
- Video: All About the Timbren 1/2" Spacer for Raised Frame Vehicles
Paul D.
1/19/2026
Awesome. Do you carry a little kit separately that includes a new spindle nut and washers so I can order it with the hub? The last time I had a trailer hub go bad it messed up the threads some on both the spindle and spindle nut, so I needed a new spindle nut to clean up the spindle threads and to secure the new hub. Thanks!