Hub for 2025 Grand Design Transcend One 151RB to Allow 16 inch Wheel to Fit
Updated 08/07/2025 | Published 07/03/2025
Question:
Greetings, I have been referred to you by The Trailer Parts Outlet. I have a single Lippert axle unit V000967672 on my 2025 Grand Design Transcend One 151RB. This axle is rated at 4000 lbs capacity due to being fitted with 15 inch wheels with 5X4.5 lug hubs. I am in serious need of increased ground clearance and wish to install 16 inch wheels with 6X5.5 hubs. It looks like this conversion will open a new world of tires. Can you help me with a package for this project? Thank you.
asked by: Steve W
Expert Reply:
Hey Steve, for a hub drum to replace what you have and give you the 6 on 5-1/2 inch bolt pattern you are wanting you'd want the part # AKHD-655-35-K. Do you have a 16 inch wheel and tire already picked out?
If goal was just more ground clearance would a lift kit be a better or more simple option to use instead?
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Identifying the Bearings and Seals on a Lippert Trailer Axle
- Q&A: How To Find Correct Grease Seal Size For Tandem Dexter Trailer Axles
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: MB Sturgis Propane Adapter Fitting - 1/4" Male NPT x Male Type 1
- Shop: MB Sturgis Propane Adapter Hose - Model 250 Quick-Disconnect x Disposable Cylinder Port - 4'
- Shop: MB Sturgis Sturgi-Stay T-Fitting w/ Hose - POL Valve - 2 Model 250 Quick-Disconnect Ports
- Shop: Timken Replacement Bearing and Race Set - L44649 and L44610
- Shop: Grease Seals 10-36 (pair)
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Q&A: What Size Wet Bolts Come with MORryde Suspension Upgrade Kit # MR46ZR
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Q&A: What is Difference Between Trailer Hubs # AKHD-655-35-K and # AKHD-655-35-EZ-k
- Q&A: Replacement Bearings, Races, Grease Seals & Brakes For Lippert 4,400LB Axle On Jayco Travel Trailer
- Q&A: Will the Lippert Electric Trailer Braking Assemblies Work With a 4,400 lb AL-KO Axle
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Electric Trailer Brakes: How They Work & What to Buy
Jameson C.
8/7/2025
Hey Steve, did you decide to go with the hub drum replacement or explore the lift kit option for more ground clearance? I'm curious to know how it worked out for you, as it might help others in a similar situation.