To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Most brake controllers clutter up the cab, but this one hides the main unit out of sight behind the dash. All you see is a small knob that measures just 1-7/8" long and 9/16" wide. It blends right into your dash like it came from the factory. That single knob does everything—adjusts braking power, activates manual override, and shows color alerts while towing. You get a clean factory look and no bulky box under your knees.
Instead of that jerky push and pull when slowing down, this proportional controller applies your trailer brakes with the same intensity as your tow vehicle. A built-in 3-axis accelerometer senses deceleration and sends matching power to the trailer for balanced, even braking every time. It’s rated for trailers with up to 2 axles (4 brake assemblies) and works with both electric and electric-over-hydraulic brakes. Output ranges from 9V–16V with an 18-amp continuous current rating for steady performance mile after mile.
Wiring doesn’t have to be a chore. The included custom harness plugs right in—no splicing required. The main box can mount in nearly any orientation behind trim or under panels using screws, tape, or zip ties. A 3-foot cable connects the module to the knob, giving you plenty of flexibility to place controls where they’re easy to reach. Once wired up, calibration happens automatically as you drive.
When sway starts or you need extra braking power in a pinch, just press the control knob to activate the trailer brakes on their own. It also triggers the trailer brake lights so drivers behind you know you’re slowing down. The LED changes from blue to red as braking power increases—simple, clear feedback that keeps you in control even during sudden stops.
The system meets or exceeds UNECE R21 and FMVSS 201 safety standards, so it’s designed for reliable operation in demanding conditions. With a maximum charging voltage of 12V DC and durable components proven in rugged environments, it’s built to handle serious towing without worry year after year.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
Ratings & Reviews
This review includes the following items: Item #RED69FR - Wiring Harness, 30A Breaker kit and Item # ETBC7 Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat and Item #RED24FR Controller. I wanted to be sure I had everything. A local place Custom Coach on Pulaski Hwy, Baltimore did a fantastic job on the install, Sorry I can't remember the techs name. I have a 2018 Kia Sorento SX V6, AWD with 4 pin Tow Pkg. car rated for 5k/500# load. Trailer is a 2022 Palomino Real Lite RL-186. I've logged 2 trips so far 1 to NYS mostly highway and to Cass, West Virginia area. The controller adapted quickly, I went to a '5' to a '4' setting even in the mountains it was smooth no jerking. The one picture shows installation ubder the dash totally out of the way. It works great!
I was surprised how nice this brake controller is - clean install with the unit up under the dash. I installed the knob in one of the 'blanks' in the dash for a really clean look. No banging knees on older-style controllers under the dash. Thanks!
The hardest part was getting the zip ties tightened around the module without completely removing the trim under the steering wheel. I chose near the shifter for my location so it’s easy to reach but still out of the way.
Working well through one season. Hoping for many more.
I loved my Redarc in my Sequoia so it was an easy choice to go with them again for my Suburban. It was easy to install and makes for a clean setup.
The controller and dash knob are solid and nicely crafted. Both are made to be easy to install. The dash knob works great and is simple and easy to use. The manual is well written, and has detailed and very useful information. Be sure to get the REDARC Tow-Pro Harness (TPH-025), too, which is needed to complete the hookup of the controller.
This sure made things easy on my 2018 Silverado Tow-Pro Trailer Brake Controller installation-A simple plug and play install!
Mounting the brake controller up and out of the way under the dash of my 2023 Tacoma required some thought. I chose to fabricate a bracket from a piece of 3/4" aluminum angle (bolted to the underside of the dash) and anchored the brake controller to it with zip-ties.
I love the separate controller and knob. The knob fit into a factory blank and the end result is factor clear. We picked up of 7x16 cargo trailer yesterday and the controller worked perfectly.
With the vehicle specific harness the install was very straight forward.
Highly recommended
i have ordered 2 of these in the last 2 years and both times the kit was missing parts, last one i ordered the knob was missing and this last order the nut to hold the dial in place was not in the box. the product is good, but replacement pieces are not easy to find, fortunetly i had to order a complete dial kit for the one i ordered last year and i saved the rest of the parts.....
Expedited shipping was super fast with no problems. I installed the unit myself and it was fairly simple. I recommend getting the exact fitting wire harness (huge time saver) and I’d recommend getting and exact fit knock out to install the dial in. (Another big time saver). I drilled a hole in my own blank or knock out thingy and I’m pleased with it but it took a little time. I’ve got a 2010 Honda Pilot. Funny thing, after rushing to install the brake controller, our trailer had to go in for repairs before we even completed the transaction. It will be another month before I actually use the brake controller.
Almost super easy to install. The switch and knob if the hole isn’t perfectly in the correct spot you need to open it up some and the nut is difficult to get started because the thickness of the dash plastic.
Overall very simple and easy to use and install.
Etrailer is great. Service is outstanding even the return policy. My go to for trailer needs
On the Promaster when you take the BCM cover and upper dash cubby hole piece out there is a spot right above the BCM. Since the Redarc can be mounted any direction I simply added two 4mm Rivnuts to the bracket and bolted the controller in with stainless hardware (Bolt, washer, lock washer). The rest of the dash is kind of hard to find a spot, as I wanted it reachable with my right hand as I drive with my left typically. The lower instrument panel knee bolster comes down with a few screws and the inner dash piece has a hole from the factory that is perfect for the switch wiring. I used a unibit drill and a small square file to make the hole for the switch. The 90 degree cat cable is nice as it sticks through the inner hole and holds itself in place so it doesn't fall out into the bakc of the dash during assembly of the switch and there is enough room in the rear to not impede anything factory. I used a tap from O'Reillys's to tap into the brake wire suggested by the Mopar trailer wiring install guide. Typically I'd solder it, but it looks way better than a typical scotchlock connector, which I would not use under any circumstances. Ill chck its tightness in a few months and see how it holds. Used the factory wiring harness runs to run to the battery box under the floor. Used proper friction tape and braided wiring loom (O'Reilly's find) for a factory look. Seems to work ok, but need a trailer with brakes now.
this brake controller was very easy to install with the custom wire harness specifically made fo my truck. It's pretty much a plug and play deal. hardest part is deciding where you want the control knob and snaking the wire to it behind the dash. Just brought our new travel trailer home and the brake controller worked great. I tested it in the RV dealer parking lot to find a good setting for it then drove it home with no problems.
I installed this brake controller on my 2018 Silverado 1500 z71. My truck didn’t come with the Chevy factory controller but I wanted to use the factory location. It took me about 45 minutes to complete the install, most of this time was spent modifying the 3D printed blank adapter for the controller remote dial. So far everything is working great. I will try to update this review after a few months.
This controller works amazingly well, considering the ease of installation, especially with the vehicle-specific wiring harness. I made several trips between Missouri and Colorado last year, loaded and unloaded, and a small twist of the dial compensated for the weight differences and braking requirements.
I didn't realize when I bought a new Frontier truck that I could no longer use traditional underdash brake controllers like I had for past 40 years. This meant that this Redarc was one of only a few brake controllers that I could use.
Mounting it was a bit tricky and the supplied instructions weren't good. Fortunately others before me had figured it out and posted better step by step instructions with pictures.
The brake controller itself works very well and provides the best and smoothest braking control I've ever experienced with my twin axle camper on multiple trips this last summer including one trip of over 1,000 miles around the UP of MI and northern WI.
The break controller works great...no problems. I've since sold the single axle trailer and purchased two more, one single axle new and one double axle used. I plan on stripping the cargo trailer and replacing the breaks and anything else that needs it for the suspension, creating a type of mini-home or tiny home on it. Thanks for reaching out. I will use your services for this new build. Thank you and keep up the good work!
Being new to towing a larger trailer requires research. After doing a lot of it, both through user reviews and manufacturer websites, we landed on the Rearc Liberty Brake Controller for our Tacoma. We have just over 1000 miles towing with this unit. It has performed extremely well. Towing for us includes city, highway, mountains, and even off-road to access our mountain home. Installation was straight forward and the ability to install the controller in virtually any position is an added bonus. I was able to install the dash knob in a blank panel giving the Tacoma a factory appearance, and controller located under drivers seat. I installed this unit on a non tow package Tacoma, so wiring was a bit intimidating at first. But using etrailer’s web site as a reference had everything operational in a couple afternoons. Great product so far and we look for years of use. Highly recommend.
I purchased the Redarc Liberty brake controller because I couldn’t find a place to mount my Tekonsha where I wouldn’t bash a knee or shin on it or cover an airbag.
So far, I’m very happy with the Redarc Liberty brake controller; although, I haven’t used it for towing yet, and I’m not sure it is operating properly. Apparently, I should have blue lights while it is learning which way the control unit is oriented but I don’t have blue lights.
Anyway, let me share information on the installation. I purchased the wiring harness for my vehicle, which I highly recommend as it was same cost as the universal harness, and a big time saver. I did not buy the blank switch panel for the switch installation as another reviewer stated he was able to modify the original switch blank. Big mistake, I highly recommend buying the appropriate switch panel for your vehicle. My Toyota blank switch panel was excessively complicated so I had to saw and melt a pile of plastic (see the picture) out of it without damaging the visible portion or the clips which hold it in.
Finding a suitable location to secure the controller up under the dash is a challenge with modern cars. After removing two pieces of plastic trim, I did manage to pull the panel below the steering column far enough out to complete the install. The unit it does look good. Very clean.
We’ll be towing the big trailer next week so I hope it works.
The Redarc Liberty was exactly what I wanted for my ‘20 Ridgeline. I ordered the custom pigtail and mounted everything behind the dash panel on the left side of the steering wheel. There was a blank switch cover available on the dash panel and I cut away the webbing on the back side of it (very soft plastic, Swiss Army knife) which allowed the control switch to fit right in, between the retaining clips of the blank. The drill bit sizes indicated in the instructions were not big enough for the control knob and plastic bezel so I just increased the bit sizes until the holes were big enough. Honda provided a pigtail with bare ends; I didn’t want to crimp any wires. Honda also said to put their provided fuse in slot 3 in the under hood aux fuse box; the fuse was the wrong type and there was already a 20a fuse in the appropriate slot. My Honda service tech advised Honda usually includes the wrong style of fuse and also usually installs the right one anyway. Go figure. I finished the install the night bf I picked up my new TT; took about 3 hours. It wasn't difficult but I’m pretty OCD. The most work involved routing the wires so as to avoid pinching or bending them too severely. I set the control on 5, tested it with the trailer hooked up in the sales lot and bumped it up to 6. I never felt the trailer on braking at all on the way home. Very smooth and I like the fact that it looks like a factory install. I couldn’t be happier with this controller. E-trailer’s video for the install was a great help, although I mounted the control box in a slightly different spot. This is my second purchase of towing accessories from E-trailer and I am pleased with the service and pricing both times.
Very easy install that looks factory with the small footprint. Drill size was incorrect with the directions, had to up the size for both holes. Use a long chrome socket (no ratchet needed) to hand tighten the switch to the dash. It's plug and play, I used zip ties to mount it under the dash.
Its simple and fits in the dash like it should be there. It controls the trailer as it should. it only lights up when the trailer is connected so you don't see any annoying light during normal driving. I would recommend, it has worked for me. installed in a 2016 Jeep Grand Cherokee
Installed it on my 2022 Subaru Outback Wilderness. Ordered this without the harness so had to order that separately. I think the RED52VR is what I should have ordered to include the harness. Did not like the access and the very small wire gauge on the brake pedal the instructions said to tap into so when running the wire from the 7 pin kit ETBC7 from the back of the car I ran a 3rd wire which I tapped into the brake signal going to the factory 4 pin control box in the spare tire well. I ran the wires up underside the driver side and up through the floor by the drive door rather than into the engine bay. Found a neat location to mount the controller and ground wire. Installed the control switch after drilling and dremelling the blank as shown in the great video etrailer has. Unit calibrated and worked just as advertised. Been on short test run. Need a longer trip to experiment with the brake level setting.
Do you have a question about this Trailer Brake Controller?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ken H.
8/13/2021
Perfectly!