Complete Tow Package for 2020 Honda Pilot to Tow 5,000 Camper with Brakes, Hitch, Wiring, Ball Mount

Question

Question:

I have a 2020 Honda Passport. Should I go with a class 4 if I want to haul a small 5000 camper? What are the part numbers that I would need? Hitch, wiring kit, plug mount, brake module, ball, etc. I see conflicting information between class 3 and 4. thanks

asked by: Lewis

0

Expert Reply:

Hello Lewis,

I can definitely get you set up with the correct towing components to get you out on the road to adventure!

You’ll want to check your owner’s manual to see what Honda says you can tow, just because the hitches are rated that high doesn’t mean you should be towing that much weight.

- Hitch: Just as long as your camper is no more than 5,000 pounds, a Class IV isn’t necessary. I would go with our etrailer Trailer Hitch Receiver - Custom Fit Class III - 2" # e44AR. I really like that our hitch comes in a matte black finish, it gives it that OEM look. If you prefer gloss black, go with # C13421. The hitches are identical (Curt actually makes our hitches, shhhhh, don’t tell anyone), the only difference is the finish.

- Wiring: Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector # CU86FR. Lucky for you, your vehicle has a plug-n-play wiring option for a 7-way so there is no need to install the # etbc7.

- Brake Controller: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - Up to 2 Axles - Proportional # RED24FR (this will work for your Passport; I confirmed with Redarc, we’re currently getting our page updated).
You’ll also want the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED39FR (also confirmed with Redarc), and last but not least, the Universal Mounting Panel for Redarc Tow-Pro Control Knob # 331-TPSI-001 perfect for one of those empty spots on the dash.

- Ball Mount: etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 2" Drop - 7,500 lbs # e67DR.

So, where are you going for your first trip?

expert reply by: Kate F

0

Lewis

5/15/2025

Thank you, but I saw a person say I would need a 7-way trailer plug bracket to attach to the hitch. All I see is the universal mounting panel. Where does that go? I don't want to cut any holes in my bumper. thanks

Kate F.

5/16/2025

@Lewis Got it Lewis, for that you want the No-Drill Mount Bracket, Long # 18136. This is a no drill bracket to get the 7 way onto the hitch without having to make any holes.

Lewis

5/16/2025

@KateF Okay great, just want to be sure

Answer 1

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 2

Hey Patrick! The Redarc Tow-Pro Liberty #RED52VR calls for a 30A circuit breaker or fuse on the power wire as close to the battery as possible. See the diagram below.

view full answer...

Answer 3

Thanks for reaching out, Robert! The best way to add a plug-and-play style 4-Way/7-Way connector to your 2023 Honda Passport is with the following parts: - Curt T-Connector Vehicle Wiring Harness #CU86FR - 7- and 4-Pole Trailer Connector Socket…

view full answer...

Answer 4

I would be happy to clarify! You are correct that for your 2021 Subaru Forester there are two different Class III trailer hitch receivers available, the Curt #C13409 and the Curt #C47HR. The main difference between these two hitches is the #C13409…

view full answer...

Answer 5

For a trailer brake controller, I recommend the Tekonsha Prodigy P3 Trailer Brake Controller, #90195 with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers, #3070-P which is completely plug-in-play. The Tekonsha P3, #90195 is the…

view full answer...

Answer 6

Hello Gail, I see that you were able to get one ordered. The etrailer License Plate Mounting Brackets for Hitch Mounted Cargo Carrier #e98944 is going to work great with your cargo carrier. I attached an image of what it will look like after it is…

view full answer...

Answer 7

Basically you are going to have to remove the 4-way you have and replace it with a 5-way like the part #HM47910. You'll wire this to 4-way wiring color for color and then the 5th pin for reverse lights would need to be ran back to the reverse…

view full answer...

Answer 8

We can definitely get you set up. For a 7-way wiring harness for your 2024 Honda Pilot trailsport I recommend the Curt T-Connector #C35ZV which will plug in to the existing tow package connector at the rear your vehicle. I do also recommend getting…

view full answer...

Answer 9

From my research, I discovered that most states require brake lights on any accessory if the accessory blocks the view of the vehicle's taillights. As far as the legality of the length of the carrier extending from the rear of your RV, I…

view full answer...

Answer 10

Great question! Your 2021 Honda Pilot does have the plug for the brake controller whether it's listed as having the tow package or not. When you install the T-One Vehicle Wiring Harness #118286 it includes everything you need to activate the tow…

view full answer...

Answer 11

In regards to the Redarc Tow-Pro Liberty Brake Controller part ##RED24FR, the unit should not be illuminated while driving without a trailer. If you press the button while a trailer is not attached you should see a breathing blue light and that…

view full answer...

Answer 12

Hi Mark; you can add a 7-way using the Tekonsha OEM Replacement Vehicle Wiring Harness #22117 if you want or you can use the #ETBC7. The Tekonsha is a full replacement, including the 4-way. The #ETBC7 will save you some money since it doesn't…

view full answer...

Complete Tow Package for 2020 Honda Pilot to Tow 5,000 Camper with Brakes, Hitch, Wiring, Ball Mount

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching