Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Mounting panel creates a factory look for your Toyota's dash when you install the control knob from your Tow-Pro Elite or Liberty brake controller.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there. I'm Michael with etrailer.com. Today we're taking a look at the mounting panel for your Redarc Tow-Pro Elite Trailer Brake Controller control knobs. This is part number 331-TPSI-007. This is going to mount onto your vehicle's dash. It's going to make it look a lot more like it came from the factory when you install your control knob from your Tow-Pro Elite Brake Controller.
This will work with several different models of Toyota vehicles. You can find the list on the product page. The way this works, you'll take your button. You'll notice on the top, you've got a little extra knob there, that will fit into the knob on your mounting panel.So you just slide that in, make sure those are lined up, then you'll mount the rest of your hardware. Put that little washer there, then this nut.
You want to tighten that nut down to the specifications in the instruction manual. I'm not going to do that now just for the demonstration purposes. And then you can mount your dial. Once you have this installed, click it into place, and it's going to look a lot nicer than some of the other options you have on mounting your control knob. And it will still operate, allow you to have greater control on your braking system.Now, all these pieces are not included with your mounting panel.
They are included in the Redarc Tow-Pro Elite Trailer system so you should already have them. The panel itself comes by itself. That's going to complete our look at the mounting panel for your Redarc Tow-Pro Elite Trailer Brake Controller control knob..
Average Customer Rating: 4.8 out of 5 stars (182 Customer Reviews)
Mounting panel creates a factory look for your Toyota's dash when you install the control knob from your Tow-Pro Elite or Liberty brake controller.I am very pleased with the Mounting Panel for Redarc Tow-Pro Liberty Brake Control Knob that I purchased from etrailer.com. Brittany was invaluable in helping me to figure out which part I needed. She was very patient while she answered my endless questions, pulling up diagrams and pictures. It was a perfect fit for my 2005 Toyota Tundra, and the installation was quick and easy. The control knob fit perfectly and easily into the center console, using the mounting panel that perfectly replaced the original, giving me a factory look. I couldn't be happier with it, the product and the service.
Just finished the install and testing with my travel trailer in tow.
Works perfect so far. Easy install if you have the factory tow package with the controller connector. Plug and Play.
Love the factory installed look!
The Redarc Pro Liberty Brake Controller came with both types of mounting panels. So I have two extras of each type. Wish the description of the Brake Controller told us that. Both mounting panels work great and are an exact fit for my 2021 Tacoma.
2015 Tacoma - Install of Redarc Tow Pro Elite - Mounting Panel fit perfectly in an unused slot on the left side of the steering wheel. Finished product looks like a factory install.
One note, the rounded face does not let you use the marker bezel that goes behind the nut on the Tow Pro controller - not enough room to allow depressing the knob/button. I don't find this to be an issue since the LED is at the top and illuminates the number on the dial.
Steven
6/9/2021
A year and several trips later and I am very happy with how the Tow Pro works and looks. The bezel issue mention in my earlier review was never a problem. One of the best things is that with the hidden installation I never notice that it is there until I need to use it.
Perfect fit and finish.
I ordered this setup for my 21 Tacoma with the tow package. The harness mated perfectly with the Toyota receptacle under the left front kick panel, the mounting panel looks factory and fit in the dash on the left side of the steering wheel, and the module is mounted to the inside of the kick panel. It is a tight fit, but I was able to get it all in there. I have not had a chance to use it yet. That will be in a month from now.
Best aftermarket brake controller on the market in my opinion. I used one of the blank knock-out switches in my 2020 Toyota Tacoma for a factory-esque installation.
This insert is not exactly identical to the factory switches. It's a little darker in color, a little more glossy, and a little more narrow. However, fitment is still good, and now that I'm looking at it again for this review, the differences hardly seem noticeable. When it clicks into place, it stays there nice and snug. There's basically no risk of it accidentally popping out, like what you get with cheaper, more poorly made switch inserts.
I would definitely recommend getting this for your Tow Pro if you drive a late 2000s/early 2010s Toyota!
These panels with the Redarc brake controller provide a factory install appearance in your truck. Excellent product.
Lwal
12/15/2023
These brake controllers are the best I have used. It is still working excellent and I highly recommend them.
Panel fit great on my 2012 Tacoma TRD Sport. Recognize that this panel will fit on the left side (the slots near the mirror control), while this panel
fits the slots under the radio/above the cup holder.
I accidentally ordered the wrong one, but etrailer is great with quick shipping, and I'm sure if I would have asked someone when I put the order together, they could have pointed me to the correct part.
Fit perfect in my 2019 Tacoma. All you need is a trim removal tool to pop out the tray and switch panel no screws and no need to try to remove the dash.
All the parts and wiring Harnesses came in as specified. Installation was easy.
Looks and works perfect on my 2021 Tacoma along with the Redarc Tow-Pro
break controller
Popped factory piece out and this one popped right in
This isn't a particularly a review about the part; the part fits perfectly in the dash of my Tacoma. It's the outstanding service I got. When the part didn't arrive on the expected day, another part was sent out immediately. The delivery problem was the fault on the shipping company, but the great folks at etrailer fixed it right away. Can't thank you enought!
Perfect fit for my 2022 Tacoma! etrailer is my go-to place for all my trailer accessories.
This doesn’t fit the blank switch cover. It will fit in the spot my Clutch Start Cancel switch is, but then where will I put that switch? Should make these for the smaller blank switch covers.
Easy installation and works great for towing your trailer or travel trailer
Worked exactly like it was supposed to,fast shipping and good price
I'm very happy with the service and products from etrailer.
Perfect fit in the dash of a to21 Tacoma. Works excellent with the Redarc brake controller. Has a factory fit look.
Lawrence W.
6/2/2023
Working in an excellent manner. Best I have used.
Glad this product is available for the Redarc Tow-Pro for my 2020 Tundra. When installed it will look as if it came from the factory using the blank provided by toyota. Wish information for this product was included in the information for the brake controller. It would have save a week. Good thing I was not in a hurry for the completed installation. Pleasure using etrailer web site and service. Very effecient.
Wayne R.
1/19/2022
works great!
Perfect fit for the long knock out switch panel blank for my 2012 Tacoma
Everything works fine.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwendolyn Y.
2/16/2025
Hey Perry. The install looks great! I'll also make sure to pass on your kudos to Brittany! What are you towing with your Tundra?