Hey Walter, I checked with Curt and the RVI Series 4 part #RVI44FR that you referenced showing a Code 4 is related to exposure to cold weather and it's causing some circuit board issues. The solution is to let it sit indoors to warm up for 15 to…
Yes, you can utilize the unused 12v pin on your 7 way and 6 way plug in order to keep your towed vehicle's battery topped off. Keep in mind, this will only act as a battery maintainer / tender but it will not charge a completely dead battery. It…
You link to #C59HR, the Curt Tow Bar Extension Cord w/ Socket. This connects the 7-way, blade-style connector from an RV to the 6-way round connector used for towed vehicles. This drops the black wire, the battery hot lead.
I spoke to my contact at Roadmaster and while she had a hard time finding your specific serial number in their system she was confident that your tow bar was made in 2010.
Hello Tom, thanks for reaching out. We do have the Demco Air Force One Supplemental Braking System for Tiffin Chassis Motorhomes part #DM55MV. This kit includes the parts needed to install the Air Force One on your Jeep as your Tiffin chassis has the…
Assuming your 6-way was wired up using industry standard trailer wire colors you should use the chart I attached that shows how to wire up the 6-way. Use the orientation of the screw on the center pin to know which direction is "up" and…
Hey Robert, the correct kit you'd want is the Roadmaster Diode kit part #RM-154 which is a fit for your 2005 Jeep TJ Wrangler and is designed to plug into a 4-way like what you have at the rear of your tow vehicle so it would be exactly what you…
To connect your Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000lbs Item #RM-522 to your D-Mounts you'll just need some adapters. Depending on the size of your mounts you'll need either the Adapter…
It is a simple switch, so brand compatibility should be a non-issue. When the pin is pulled, two pins are allowed to contact and complete the circuit to engage the brakes. Any switch should work fine. I pulled the Hopkins Switch, part #HM20010, to…
Hey Max, The arms of your Roadmaster Sterling All-Terrain Tow Bar #RM-576 are supposed to be able to glide in and out so that you can attach them to the mounting points on the baseplate. Since you haven't used the tow bar in a long time…
There are a couple of options you can do to attempt to free up the arms on your Roadmaster Falcon All Terrain, Non-Binding Tow Bar #RM-522. What you can do is try and spray the arms with a degreaser, then move the arms in and out and rise with some…
