CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
(103 reviews)
Price: $63.65
In Stock
CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
Item # CE13515
Retail:$88.99
Our Price: $63.65
You Save: 28%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (103)
- Q & A (0)
- Photos
CE Smith Trailer Hubs and Drums - CE13515
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- Hub
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Pre-Greased
- Standard
- 1/2 Inch Stud
- CE Smith
Pre-greased, marine-grade hub is built for trailer idler axles. Fits 3.5K axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, cap, lug nuts, and cotter pin included. For 13" to 15" wheels.
Features:
- Marine-grade trailer hub assembly fits idler axles
- Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin
- Pre-greased idler hub is easy to install - no need to pack bearings
- Lubricated with heavy-duty grease for marine applications
- Sturdy iron construction
- Galvanized finish offers excellent corrosion resistance
- Ideal for use on a boat or snowmobile trailer
- Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion
- Carrying case with handle keeps all the parts in one place
- Easy to stow on your trailer in case of an emergency
Specs:
- Application: 3,500-lb axles with #84 spindles
- Wheel size: 13" to 15"
- Bolt pattern: 5 on 4-1/2"
- Wheel stud dimensions: 1/2" diameter x 1-7/8" long
- Grease cap flange diameter: 1.98"
- Hub flange diameter: 6-1/2"
- Weight capacity: 1,750 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
13515 C.E. Smith Trailer Hub Kit with Packed Bearings for 3,500-lb Axle with Hardware and Carrying Case - 5 on 4-1/2 - Galvanized
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased - CE13515
Average Customer Rating: 4.7 out of 5 stars (102 Customer Reviews)
Pre-greased, marine-grade hub is built for trailer idler axles. Fits 3.5K axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, cap, lug nuts, and cotter pin included. For 13" to 15" wheels.by: Richard 03/29/2024
CE Smith hub assembly bearings were delivered in their individual plastic boxes and already greased and assembled. James and Kate were excellent to work with through the whole process.
by: Nathan 03/26/2024
Ordered from etrailer a few times. Not sure there is anything trailer related they dont have, pricing is generally the cheapest you'll find and customer service is top notch! Not many companies impress me these days but you guys are on it! Keep it up.
by: Lon 12/23/2023
Nice product good price comes in a nice plastic box to take with you on the road for road side service if needed. or refurbish your old hub and keep it as a spare to travel with in the plastic case.
by: Christopher 11/13/2023
so far it looks good tomorrow I mount wheels and tires and take trailer for a ride!
by: Sherri03/19/2024
This item has been sold as part of a unit item to a customer. As far as we know there have not been any issues. The customer has not been in contact with us concerning this item.
by: Gary12/01/2023
Good quality replacement hub for my trailer. Easy to install.
by: Mike04/17/2024
I called twice the first time I got Angela M. She was awesome and very helpful. Second time I ordered some leaf springs and when I finished the order I noticed I only had one spring. I then talked to Alex J. He was awesome too! He was able to cancel the order and place a new order correctly. I will definitely order parts again! give them both a raise!! Thank you Mike H.
by: Greg 08/15/2022
Easy install and OEM replacement. Ready to go. I replaced four of their and they have been great for several hundred miles.
by: Stephen 07/31/2022
Worked great for my change in bolt pattern on my trailer project.
Stephen
8/1/2023
No issues,quality product.
by: Jason 04/09/2024
Delivery was fast and exactly what I or dered
by: Drew 09/14/2023
The boat trailer is rolling very smooth now! Big difference.
Thank you!
by: Cynthia 05/22/2023
Second time purchasing. Great and love the carrying case to keep spare in truck. Hauling single axle salt water boat trailer long distances so always keep a spare.
by: Joseph01/31/2024
It worked great...on a difficulty scale of 1-10, with 10 being the hardest, this was a 2.
by: John 02/08/2024
No issues so far, great value.
by: Scott 04/11/2023
Great customer service. Nicole got me everything I needed.very pleased definitely recommend and will be using again for my next project on the trailer. Leaf springs.
by: Frank12/09/2022
Thick metal and heavy galvanizing. Casting of the hub steel came out wrong on one of them, the spindle would be rotating on an angle and wearing out the bearings. Noticed right away that the races weren’t centered. etrailer sent a replacement right away!
by: Steve 12/13/2022
As always it's been a pleasure ordering from ETrailer! Everything arrived very quickly, in perfect shape/wrapped good, and was an exact fit.
I used it to replace my boat trailers 40 year old hubs. These hubs paired well with the stainless steel bearing buddys
by: Gary 12/12/2022
Quality product. Having a pre-greased hub makes installation easy. The help that Etrailer provides for its customers (videos, expert answers to questions, and excellent product descriptions) keeps me coming back to Etrailer when I need trailer parts.
by: Tony 09/14/2023
Customer Service was very helpful and everything went very well. Adam did a great job!
by: Larry10/23/2021
I open the box which look in good shape pickup plastic box and open hub and lug nuts pin dust cap look went to check second hub box the top was busted and just fell off the hub was there but no package of lug nuts pin or dust cap do not know if hub is ok it looks like parts are there I called they said they would see about sending a new one
Sierra K.
10/26/2021
Sorry to hear about this. I see in your account that we have already shipped out a replacement.
by: Donald 02/06/2023
Love the quality and zirc fittings on rear of hub
by: Ronnie L. Cooper10/04/2021
I am sure this is an OK product, but when a product says Made in USA, the customer should expect the product to be Made 100% in the USA. The CE Smith sticker on the box states Made In China. The bearings inside this hub state CHINA. I can find nothing but websites that state this is Made in the USA. The better statement could be assembled proudly in the USA using parts from China.
Sierra K.
10/14/2021
The hub is made in the USA, but other components, like the bearings, are sourced globally.
by: Barry07/01/2020
ordered hub kits for my boat trailer and products installed and worked as intended. Only problem was kits were not in stock and had to be ordered so that's reason for 4 stars but no worries I wasn't in a big rush. Good thing is etrailer kept me updated with emails and packages arrived when they said they would.
by: Michael05/01/2022
The parts were shipped quickly and packaged well. There were no instructions included with the package and when I assembled all of the parts I did not realize that the inner and outer bearing races were already pressed into place in the hub that I bought. I attempted to install the bearings in the new wheel hub and when I went to put it on the trailer it would not fit. I kept thinking I was doing something wrong and ended up ruining two grease seals before I figured out that the bearing race was already pressed into place and was not needed. That is entirely my error ( I am not a mechanic…) but it would’ve been nice if it was indicated somehow that the bearing race is already installed in the hubs I bought from etrailer and that the ones that shipped with the hub package are extras for another application.
by: Richard 03/17/2023
Hubs fit perfectly, and the staff at etrailer were very helpful.
25
102
Show More Reviews
See what our Experts say about this CE Smith Trailer Hubs and Drums
- Proper Wheel Lug Nut Torque For a CE Smith Trailer Idler Hub Assembly # CE13515 with 15" WheelsFor mounting a 15" wheel on the CE Smith Trailer Idler Hub Assembly # CE13515 you will want to torque the wheel nuts to either 90-120ft-lbs on a steel wheel or 90-100ft-lbs on an aluminum wheel. I have included our a wheel torque chart below as well.
view full answer...
- What is a #84 Spindle and How Do I Know I Have One On My Trailer?The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer Idler Hub Assembly # CE13515 uses the following parts: Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) Grease Seal: 58846 (1.719" inner diameter and 2.565" outer diameter) As long as this matches what...
view full answer... - Bearing Inner Diameters that Come with Trailer Hub # CE13515The bearing inner diameters of what comes with the CE Smith Trailer Idler Hub Assembly # CE13515 comes with does match the dimensions you listed. This hub fits the wheel size 13 inch to 15 inch.
view full answer... - Are There Bearing Buddy Bearing Protector Grease Caps Compatible with Harbor Freight Utility TrailerHarbor Freight trailers are unique. They don't have any industry standard parts on them, so replacement parts are very difficult to find. We don't have any grease caps that will fit your 2-inch hub. It may be possible to replace your hubs with a different one that will fit your spindle measurements, but you'd need to use a digital caliper to check the spindle at the bearing locations and the grease seal.
view full answer...
- Spare Hub for Boat Trailer with Bearing Dimensions of 1-3/8 inch and 1-1/16 inchBased on your bearing dimensions you do have a 3,500 lb axle. The CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13515 that you referenced would be a really great option as it has the correct wheel bolt pattern as well as comes pre-greased, comes with a carrying case, and is galvanized to help fight corrosion which is really important for boat trailers like yours.
view full answer... - What Type of Grease is Recommended with CE Smith Trailer Idler Hub Assembly # CE13515LMX red grease like the # L11390 is what the CE Smith Trailer Idler Hub Assembly # CE13515 typically comes with and is the best all-around grease for trailer hubs so it's what I recommend. This will also be compatible with non-red grease if you were to find that your hub didn't have that color.
view full answer... - Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?Unless you want to completely clean out every bit of grease you will need to stick to a LMX red grease like item # L11390 that comes with the CE Smith Trailer Idler Hub Assembly item # CE13515. You can use your blue marine grease but you can't mix the two.
view full answer... - Availability Of Pre-Greased and Assembled 3500lb Idler Hub with 5 on 4-1/2 Bolt PatternI have another option for you, but we do not offer the Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 # 84545BX you were looking at pre-greased and assembled. The reason for this is the pre-greased and assembled hubs come that way from the manufacturer and that is not something Dexter offers. Instead I recommend the CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13515 which is the exact same hub as the Dexter option, but comes pre-greased...
view full answer... - Are CE Smith Trailer Idler Hub Assemblies CE13515 Compatible With Bearing Buddies?Absolutely! The CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13515 is absolutely compatible with Bearing Buddies. Bearing Buddies are perfect for keeping the hubs greased and preventing water from seeping in which could cause issues issues down the road. The correct Bearing Buddies for the # CE13515 is the # BB1980A. I included videos of the products mentioned for you to take a look at.
view full answer... - What Hub do You Recommend for My 2005 Karavan BW-2350-74-ST Boat Trailer?From my research on your 2005 Karavan model BW-2350-74-st, you most likely have a 3500 pound axle on your boat trailer. For a great hub, I recommend the CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 # CE13515. This particular hub is galvanized in order to give you extra rust/corrosion protection. The hub also comes pre-greased to help with the installation. This hub is compatible with 14-inch wheels. In order to confirm for sure this is what you need, I recommend...
view full answer... - Determining Which Idler Hub Assemblies Will Replace Hub and Drum Assemblies On 19' Boat TrailerI would be happy to help! What you will need to do is go ahead and remove on of the hub assemblies from your 18' boat trailer and look for the bearing number stamped in the face of each the inner and outer bearings as shown in the included picture of the # L44649. If the bearings on your trailer are worn to the point that you cannot read the bearing numbers you will need to use digital calipers # PTW80157 to preciesly measure your spindles in the locations shown in the included diagram. If...
view full answer...
- Recommended Galvanized Hub W/ 5 on 4-1/2" Bolt Pattern For Timbren Axle-less Suspension ASR1THDS01For the Timbren Axle-Less Trailer Suspension System - Spindle w/Brake Flange - Regular Tires - 2,200 lbs # ASR1THDS01 I recommend the CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13515 as the bearings come pre-greased meaning all you need to do is put them on your spindle and go! No need to get your hands dirty. I included a video for both of the products mentioned for you to take a look at.
view full answer... - What Size Idler Hubs and Bearing Buddy Protectors Fit a Shoreland'r LUV40TMXWMS1-16 Boat Trailer?Based on the information I could find it appears your Shoreland'r LUV40TMXWMS1-16 uses standard 3,500lb axle and hubs. I always recommend verifying this as I have seen manufacturers make changes or trailers get axles changed due to being damaged in transit. These hubs will fit the 1.98" Bearing Buddy # BB1980A-SS. The CE Smith Trailer Idler Hub Assembly # CE13515 you found does contain the correct size bearings and grease seal for a standard 3,500lb axle and will also fit the Bearing Buddy...
view full answer... - Replacement Idler Hubs For a 1990's Calkins Boat Trailer With 45264 Idler HubsI recommend using the CE Smith Trailer Idler Hub Assembly # CE13515 for your Calkins boat trailer. These have the 5 on 4-1/2" bolt pattern and is prepacked and greased for your spindle. You can add the Bearing Buddy Bearing Protectors # BB1980A-SS to these hubs if you wish to be able to more easily fill your hub full of Grease # LOC54FR.
view full answer...
- Comparing etrailer and CE Smith Idler Hubs for a 3,500 lb AxleThe Easy Grease Trailer Idler Hub Assembly for 3.5K Axles # AKIHUB-545-35-G-EZ-K and the CE Smith Trailer Idler Hub Assembly w/ Case # CE13515 fit the same spindle, have the same bolt pattern, and are galvanized so yes, essentially the only things that separate the 2 assemblies is that the CE Smith comes pre-greased and in a carrying case. If you choose to go with the etrailer option then you'll also need grease like part # L11380 to pack the bearings with. Attached are some videos for...
view full answer... - Bearing Grease Compatible With CE Smith Prepacked Hub KitsAccording to CE Smith they use a Calcium Sulfonate grease on their hubs like the CE Smith Trailer Idler Hub Assembly # CE13515. This would require either the Tub # LOC64FR or Tube # LOC54FR of grease. While the color of this grease is tan it will still work as they have the same complex. The LubriMatic LMX Industrial Strength Grease # L11390 you found is a Lithium complex and should not be mixed with the Calcium Sulfonate grease.
view full answer... - Replacement Bearing Set for Freedom Axle 45264 3500 lb Idler HubIf you're just needing replacement bearings, races and grease seals, you'll need the following per hub: • # L44649 Outer Bearing • # L68149 Inner Bearing • # L44610 Outer Race • # L68111 Inner Race • # 168255TB Grease Seal If you're wanting to replace the entire hub, you'd use # CE13515 for a galvanized hub or # CE13511 for black powder coated. The bearings, races and seal is pre-installed and the bearings are already packed with grease, but the included grease seal would be incorrect...
view full answer... - Replacement Hub For an Older Shorelander Trailer With Inner Bearing 1-3/8 Inch & Outer 1-1/16 Inch Based on your measurements you will need a Inner Bearing # L68149 and Outer Bearing # L44649. This is the common size used on 3,500lb trailer axles. It seems odd to not have a Inner Race # L68111 on your hub. The bearing race will be a press in fit and will not require Loctite to hold it in place. On the CE Smith Trailer Idler Hub Assembly # CE13515 you saw the races will already come pressed in place. I do recommend measuring the landing for the grease seal. The Seal # 58846 included on...
view full answer... - Replacement Hub for 2005 Eagle Boat TrailerIn order to determine which hubs you're going to need as a replacement you will need to pull the hubs to see what bearings will fit on your spindle; the bolt pattern is only part of the equation, but still helpful to know. To accomplish this you can either check the numbers that are stamped on the backs of the existing bearings, or measure the spindles where the bearings sit using a digital calipers like the # PTW80157. The Dexter 10" Hub-and-Rotor # K08-435-05 is designed for use with...
view full answer...
- Pre-Greased Galvanized Trailer Idler Hub 5 on 4-1/2 Bolt Pattern For 3,500 Lb AxleYes, we do the CE Smith Trailer Idler Hub Pre-greased with case part # CE13515 is the same galvanized hub as part # AKIHUB-545-35-G-EZ-K except it's pre-greased. It has an inner bearing of # L68149 and outer bearing of # L44649 with a 5 on 4-1/2 bolt pattern.
view full answer... - Is The CE Smith Idler Hub Compatible With DeeMax Slip On Disc Brake Rotor For 3,500LB Axle? Yes, the CE Smith Trailer Idler Hub Assembly # CE13515 can be used with a slip on rotor like the DeeMaxx Disc Brake Kit # DE42FR uses. We do also have the DeeMaxx Trailer Idler Hub # DE36VR if you would like to stick with the same manufacturer for these components. One nice feature about the DeeMax idler hub is they stamp the bearing and seal information into the hub so you will not have to pull the hub apart if you forgot what size parts you need. You will need the Inner Bearing # L68149,...
view full answer... - Availability of a Bias Tire and Wheel Package Which Will Bolt To a 5 on 5-1/2 Bolt PatternCurrently we only carry the following wheel and tire packages which have a bias ply tire and wheel with 5 on 5-1/2" bolt pattern. Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR E # AM3H454 Kenda Loadstar 205/65-10 Bias Trailer Tire w/ 10" Solid Center Wheel - 5 on 5-1/2 - LR C # AM3H453 We do have the Kenda ST205/75D14 Bias Trailer Tire w 14" White Spoke Wheel # AM3S455 which has the more common 5 on 4-1/2" bolt pattern if you are able to switch...
view full answer... - Recommended 3500lb Timbren Axle-Less W/ 4 Drop For 3000-3300lb Horse TrailerThanks for all of the information! The products you were looking at are all compatible. Starting with the Timbren Axle-Less Suspension I would go ahead and use the # A35RD545 as it has the 3500lb rating which will be perfect for your intended trailer weight, and already includes the 5 on 4-1/2" bolt pattern hubs that you were wanting. The # ASR3500S04 is the exact same spindle just without hubs, and would work perfectly with the # CE13515 you mentioned, but there is not really much of...
view full answer... - Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler HubsWe do have the etrailer Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K and Trailer Idler Hub Assembly # AKIHUB-545-35-G-K available in a galvanized finish. Currently the Dexter 8-248 Idler Hub # 84545BX we only carry in the black finish. We also have the CE Smith Trailer Idler Hub Assembly w/ Case # CE13515 that is also galvanized or the Kodiak Trailer Hub # KH84545S made from stainless steel. The stainless will give you the best corrosion resistance of all the hubs. You...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Cole B
Installed by:
Randy B
Expert Research:
Jameson C
Updated by:
Wilson B
Written by:
Alexander C
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Greg
8/16/2023
A year later an my boat trailer is rolling strong with no issues. Lots of miles and no worries.