CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
(23 reviews)
Price: $69.25
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
Item # CE13315
Retail:$92.72
Our Price: $69.25
You Save: 25%
Need help with installation?
Locate installers near me- All Info
- Reviews (23)
- Q & A (0)
- Photos
CE Smith Trailer Hubs and Drums - CE13315
- 5 on 4-1/2 Inch
- For 2700 lbs Axles
- Hub
- 13 Inch Wheel
- 14 Inch Wheel
- Pre-Greased
- Standard
- 1/2 Inch Stud
- L44649
- L44649
- CE Smith
Pre-greased, marine-grade hub is built for trailer idler axles. Fits 2.7K axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, cap, lug nuts, and cotter pin included. For 13" to 14" wheels.
Features:
- Marine-grade trailer hub assembly fits idler axles
- Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin
- Pre-greased idler hub is easy to install - no need to pack bearings
- Lubricated with heavy-duty grease for marine applications
- Sturdy iron construction
- Galvanized finish offers excellent corrosion resistance
- Ideal for use on a boat or snowmobile trailer
- Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion
- Carrying case with handle keeps all the parts in one place
- Easy to stow on your trailer in case of an emergency
- Made in the USA
Specs:
- Application: 2,700-lb axles with BTR spindles
- Wheel size: 13" to 14"
- Bolt pattern: 5 on 4-1/2"
- Wheel stud dimensions: 1/2" diameter x 1-7/8" long
- Grease cap flange diameter: 1.98"
- Hub flange diameter: 5-1/2"
- Weight capacity: 1,350 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L44649 (1.063" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L44610
- Outer race: L44610
- Grease seal (included): 34823
- Inner diameter: 1.249"
- Outer diameter: 1.983"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
13315 C.E. Smith Trailer Hub Kit with Packed Bearings for 2,700-lb Axle with Hardware and Carrying Case - 5 on 4-1/2 - Galvanized
California residents: click here
Customer Satisfaction Score:
79% were satisfied with this product
21% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased - CE13315
Average Customer Rating: 4.9 out of 5 stars (23 Customer Reviews)
Pre-greased, marine-grade hub is built for trailer idler axles. Fits 2.7K axles with BTR spindles. Inner bearing (L44649) and race, outer bearing (L44649) and race, grease seal, cap, lug nuts, and cotter pin included. For 13" to 14" wheels.by: Thomas10/04/2023
You went the extra mile to help make sure hubs were right. Been on several trips with smooth trailer performance. You are the best! My go to company for trailer parts. Thanks.
by: Harvel09/19/2023
Have not had time to install or even open your box. Might be several weeks til I can find time. Too busy fishing. Reds and specks are hungry in Texas
by: Anthony 06/01/2023
The tech department helped me cross reference an unknown hub, delivered as promised and the container was strong enough to keep all parts in good condition. Thanks!
by: David 09/01/2023
Customer service was knowledgeable and responsive. Shipped and delivered as promised. Prices were as good as I could find anywhere. Now I have to do the work of replacing the hubs I received.
by: John 06/23/2023
Nice quality
by: Eric04/20/2023
Excellent product and quick shipping!
by: Paul 08/10/2022
Carol very helpful, identifying the proper part for my trailer
by: Sydney07/16/2020
Got what I expected excellent product. We have a 1978 starcraft pop up camper
by: Chad02/06/2019
Great customer service and super fast shipping. Thank you etrailer!
by: Alec 11/17/2020
as-advertised and installed fine. Only time will tell in terms of functionality but no complaints so far.
by: Dennis11/07/2020
Fast shipping, knowledgeable staff Will definitely order from these folks again.
by: Patrick09/17/2020
Exactly what I expected.
Delivered on time as promised.
by: Dennis 09/02/2022
by: Franklin09/14/2022
by: Dejan10/11/2022
by: Eldon 09/09/2023
by: Stephen 08/09/2023
by: Jason04/17/2022
by: Michael J05/19/2023
by: Joseph A03/03/2023
by: Chris 09/15/2022
by: Kevin 09/22/2022
by: Mark 04/11/2021
23
23
See what our Experts say about this CE Smith Trailer Hubs and Drums
- Trailer Hub is Sitting Too Far Back on the SpindleIt actually sounds like the hub that is sitting flush isn't pushed on all the way. The area the seal sits should stop the bearing from moving too far, so I suggest pushing that one on further and they should then match each other.
view full answer... - Will the CE Smith Trailer Idler Hub Assembly CE13315 Work With 8" WheelsThe CE Smith Trailer Idler Hub Assembly part # CE13315 will work with wheels up to 14" diameter per CE Smith so your 8" diameter wheels will be fine.
view full answer... - Replacement Hub Assembly For EZ Loader Trailer Hub 300-020883You will need the CE Smith Trailer Hub Assembly # CE13311 for a replacement hub on your EZ Loader Trailer with hub 300-020883. Your hub uses a grease seal that has an inner diameter of 1.249". The CE Smith Trailer Idler Hub Assembly # CE13315 that you found has a grease seal that has a 1.50" inner diameter.
view full answer... - Replacement Hubs for EZ Loader Model EZNB 14-17 1650 Boat TrailerThe correct galvanized replacement hubs for your EZ Loader EZNB 14-17 1650 trailer are # CE13315. The hub includes bearings, races, the grease seal, replacement cotter pin, dust cap and lug nuts.
view full answer... - Replacement Pre-Greased 5 On 4-1/2" Hubs For Trailers Using L44649 Inner And Outer BearingsYou are correct, CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13315 is exactly what you are looking for. This fits your 13" wheels with 5 on 4-1/2 bolt pattern. It comes pre-greased and includes the necessary L44649 inner bearing and race, L44649 outer bearing and race, grease seal, cap, lug nuts, and cotter pin. I have attached a demonstration video for this kit.
view full answer... - Recommended Replacement Hub For Boat Trailer With 1-1/16" Straight Spindles and 5 on 4-1/2" WheelsThank you for the information! Based on the information you provided I recommend the CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased # CE13315 which uses inner and outer bearing # L44649 which are for 1-1/16" straight spindles, and has the 5 on 4-1/2" bolt pattern you are looking for. The # CE13315 is galvanized making it a perfect option for a boat trailer. I included a video of the # CE13315 for you to take a look at.
view full answer... - Which Replacement Hub for Shoreland'r SLR22L Boat TrailerAccording to Shorlandr, your SLR22L trailer uses hubs with a L44649 inner and outer bearing. The # CE13511 hub you mentioned uses a different inner bearing, so it won't work for you. The good news is that the # CE13311 is the correct hub, assuming your existing hub has a 5 lug on a 4-1/2 inch bolt circle. Or, even better, since it's a boat trailer we offer a corrosion resistant galvanized version of the 5 on 4-1/2 as well, available as part # CE13315. The replacement hubs include 1/2-20...
view full answer... - Replacement Hubs for 1978 Starcraft Pop-Up Camper with Inner and Outer Bearings L44649Yes. If your current hubs use inner and outer bearings # L44649 then the CE Smith Trailer Idler Hub Assembly # CE13315 will work well for you. These hubs come pre-greased so they're ready to install and they are compatible with your 13" wheels.
view full answer... - Replacement Idler Hub Assembly For A 1999 Coleman Mesa Popup Camper I would need to know what your current inner and outer bearing numbers are on you 1999 Coleman Mesa. I will attach a link below letting you know how to find it. The CE Smith Trailer Idler Hub Assembly # CE13315 will work for you if your inner and outer bearings are # L44649 both bearings have an inner diameter of 1.063 inches. You will also need to know the bolt pattern of your current hubs I will attach a link below on how to measure your bolt pattern. When you find out what the...
view full answer... - How to Determine Correct Replacement Hub For Jet Ski TrailerSo I can help you determine how to figure out the correct replacement hub for your jet ski trailer, but there's some things you'll need to know first, and I wouldn't be able to confirm a fit of the CE Smith Trailer Idler Hub Assembly # CE13315 without those details. First, you need to know the weight rating of your axle, and also what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should...
view full answer...
- Replacing Short Hubs On A 1996 EZ Loader Trailer With Straight SpindlesIt does sound like your bearings are a # L44649 (1.063" inner diameter). If they are original to the trailer they may be pretty worn, which is why your measurements may be off by a few hundredths. Also the seal # 34823 that can be used with the hub # CE13311 is a 1.249" ID so I think we are on the same page there. The hub # CE13311 uses the correct bearings and seal, but it is is 4 1/8" from the outside of the inner bearing to the outside of the outer bearing. Virtually all of the hubs...
view full answer...
- Replacing Trailer Axle Spindle From Older Short Spindle To BTR E-Z Lube SpindleIt sounds like you have an older style trailer axle with the short spindles. You will need a new Spindle # TRU44FR to mount on your axle as the short hubs are now obsolete. This will allow you to use the what is now standard length spindle dimensions. The CE Smith Trailer Idler Hub Assembly w/ Case # CE13315 is designed to fit the newer BTR spindles that are more commonly found on trailers.
view full answer... - Replacement Galvanized Idler Hub For 2000 EZ Loader Model 1-EZL90B 15-12 2100 NB Boat TrailerI reached out to EZ Loader to verify the correct parts for your boat trailer. They informed me it uses the Bearing # L44649 for both inner and outer and a grease Seal # 34823 with a 1.249" inner diameter. The CE Smith Trailer Idler Hub Assembly # CE13315 is our galvanized hub which uses these components as we do not carry the Vortex hubs brand.
view full answer...
- Correct Replacement Hub For Jet Ski Trailer With BT150 HubI would be happy to help! Based on the BT150 stamped in your hub you will need the CE Smith Trailer Idler Hub Assembly # CE13315 which includes inner and outer bearings # L44649. This hub comes pre-greased and ready to install on the spindle of your Jet Skit Trailer making it a very easy option. I included a video of the # CE13315 for you to take a look at.
view full answer... - What Grease Is Used With the CE Smith Trailer Idler Hub Assemblies? The CE Smith Trailer Idler Hub Assembly # CE13315 does come with Calcium Sulfonate grease. We have the Marine Grease # L54FR that is safe to use with their pre-greased hubs. This would require the LubriMatic Mini Grease Gun # 30-800 to use the 3oz tubes.
view full answer... - What Grease Is Compatible With the CE Smith Trailer Idler Hub # CE13315?The CE Smith Trailer Idler Hub Assembly # CE13315 comes pre greased with a marine formula grease. We have the LubriMatic Marine Trailer Wheel Bearing Grease # L54FR that is compatible with the grease in the hub. You will need a Mini Grease Gun # 30-800 to use the smaller 3oz cartridges.
view full answer... - How to Select Correct 2,700 lb Hubs For Boat Trailer With Water Getting InYes, you can replace your hub with one that has better seals, though water should remain out of your boat trailer's hubs with a combination of double-lipped grease seals and keeping your bearings packed with grease. This will be the best prevention against water getting into your hubs. To determine the correct hubs for your trailer, you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number...
view full answer...
- How To Find Replacement Idler Hub for Load-Rite Trailer with 2,700 Lb AxleThe most likely replacement trailer hub we have available for a 2,700 lb axle is the CE Smith Trailer Idler Hub Assembly part # CE13315. This hub uses L44649 bearings which have an inner diameter of 1.063" and a 10-9 grease seal which has an inner diameter of 1.250". In order to confirm this is correct you will need to verify this as I don't have a way to look up what you have now. In regards to the bolt pattern, this will be the standard 5 on 4-1/2". I have attached an article that shows...
view full answer... - Replacement Hubs for 2,700 lb AxleBased on your photo it looks like you have 2,700 lb axles, and we do have hubs for that size axle. However, you will need to confirm the bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper to measure your spindle to the thousandths of an inch where the bearings...
view full answer...
- Spindle for a CE Smith Trailer Idler Hub Assembly w/ L44649 BearingsYou will need the BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter item # TRU44FR to work with the CE Smith Trailer Idler Hub Assembly item # CE13315.
view full answer... - Replacement Bearings for EZ Loader Boat Trailer With 2700 lb AxleAccording to EZ Loader, you have a 2.7K axle that uses BT150A oil bath hubs. If you wanted to convert to grease-lubricated hubs, we have a replacement for you. I'd go with the # CE13315 which includes the inner and outer L44649 bearings, the races, the grease seal, the dust cap and lug nuts. The grease is even included. I prefer grease to oil bath hubs because oil bath hubs are much more prone to leaks and water intrusion than grease packed hubs. If you just wanted to replace the bearings,...
view full answer... - Replacement Idler Hub for 3500 lb Axle on Boat TrailerFrom what you describe, you have a 3500 lb axle which uses an L44949 outer and a L68149 inner wheel bearing. For a replacement hub with a 5 on 4-1/2 inch bolt pattern, use # AKIHUB-545-35-G-EZ-K for a galvanized idler hub that's perfect for a boat trailer. The hub includes the bearings, races, grease seal, dust cap and lug nuts. A 2K capacity hub wouldn't be compatible with the spindles on your axle. I've linked to an install video that you might find helpful.
view full answer... - Replacement HUB for 2007 KARAVAN USR-6650-TB-78-12 Boat TrailerBased on what you listed we have a hub that fits your trailer axle with the part # 8-201-9UC3-EZ but this is a 6,000 lb axle hub. It has bearings that match your spindle dimensions, the correct 6 on 5-1/2 inch bolt pattern, an EZ lube grease cap, and 1/2 inch wheel studs. This is pre-greased. There are no 8,000 lb axles with a 6 on 5-1/2 inch bolt pattern.
view full answer... - Replacement Idler Hub for Continental Boat TrailerWhen I did a google search on the 125197250 number you provided, it keeps taking me to the L44649 bearing. is the surface of the spindle that the inner and outer bearing ride upon the same diameter? You could take a digital caliper like # PTW80157 on the spindle surface where the 125197250 bearing rides. If it's right around 1.06 inches, then it's a L44649 bearing. Different manufacturers can refer to the same bearings using different reference numbers. If the spindle doesn't have a taper...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Noah M
Updated by:
Carrie F
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.