CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
(36 reviews)
Price: $75.94
In Stock
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased
Item # CE13311
Retail:$89.49
Our Price: $75.94
You Save: 15%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (36)
- Q & A (0)
- Photos
CE Smith Trailer Hubs and Drums - CE13311
- 5 on 4-1/2 Inch
- For 2700 lbs Axles
- Hub
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- Pre-Greased
- Standard
- 1/2 Inch Stud
- L44649
- L44649
- CE Smith
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.
Features:
- Kit lets you replace 1 hub assembly on your trailer
- Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin
- Perfect for storing onboard your trailer in case of an emergency
- Pre-greased with heavy-duty, marine-grade lubricant
- Ideal for boat trailers
- Strong, cast iron hub is painted black
- Double-lip grease seal helps keep moisture out and grease in
- Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion
- Carrying case with handle keeps all the parts in one place
- Made in the USA
Specs:
- Application: 2,700-lb axles
- Maximum wheel diameter: 14"
- Bolt pattern: 5 on 4-1/2"
- Wheel studs: 1/2" diameter x 1-7/8" long
- Hub inner diameter: 1.98"
- Hub flange outer diameter: 5-1/2"
- Weight capacity: 1,350 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner and outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner and outer race: L44610
- Grease seal (included): 12192TB
- Inner diameter: 1.249"
- Outer diameter: 1.983"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
13311 C.E. Smith Trailer Hub Kit - Straight Spindle - 5 x 4.5 Stud Pattern - 1,350-lb Capacity
California residents: click here
Customer Satisfaction Score:
74% were satisfied with this product
26% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased - CE13311
Average Customer Rating: 4.4 out of 5 stars (36 Customer Reviews)
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.by: Andre09/22/2022
I am sure the product is of average quality, however when you purchase multiple items from etrailer (some of substantial weight) and they box everything together without any packing materials to keep fragile items safe, the comfort and likeness of purchasing items through this retailer drops. Brought this up with their customer service, and they said it was packed properly.
by: Aaron09/20/2021
The hub is packaged in a case so they can be carried as a spare. But for some reason the box mine is packaged in is damaged and won’t stay shut. Kind of makes me wonder if the hub is going to fit in work in an emergency situation. I don’t know?
by: Dee Dee05/20/2023
Had a little damage to the case when it arrived, but they immediatly sent me a new case. They have good customer support. I hope I don't need to use the hub anytime soon. It will be backup for a 800 mile trip I will take to Florida. Having it for backup is great piece of mind. Thank you etrailer!
by: Brian07/27/2023
Had the wrong seal installed. Customer service was great and are sending the correct seals out.
by: Thomas 10/09/2022
Great price, product is well made. Quick shipping, customer service was fantastic. Thanks
by: Jess 06/16/2021
If you own an older trailer, or are having issues with hubs on your trailer, then you owe it to yourself to purchase this hub assembly! It was a simple process to swap out out "the old for the new". As always, the etrailer people are there to provide help for you if necessary.
Jess L.
6/17/2022
Everything is still working A-OK ! Simple solution for a pain in the a__ problem ! And the price was right, too. Just remember to check and grease fittings when necessary.
by: Vsevol005/05/2023
Have it in your truck when towing.
by: Kyle07/25/2019
All parts were exactly as expected. The reason I took one star away is because of the “pre-greasing.” Yes the hub had grease but the bearings were not packed at all. I could completely see through the gaps and had to remove and grease pack each one before installing.
Kyle
7/25/2020
Since installation the hubs and bearings have worked flawlessly. I haul my boat to and from local ponds and have never once had an issue. I would definitely recommend these products and this company.
by: Tom12/04/2018
Fits my boat trailer well and comes in a nice compact container. This is a great product for my upcoming cross country trip. Any bearing problem can be quickly repaired on the side of the road by just removing/reapplying lug nuts, cotter pin and castle nut. It should be a 15 minute fix instead of waiting hours for costly tow. Well worth $53.
by: Daniel06/17/2018
The pre packed bearings and hub kit worked out great, yout Tech’s really helped me with my spacer problem. The new wheels and tires really look good. I still have to road test to see if I got the hubs bearing clearance correct. Will definitely do business with from now on. Your service is very professional.
by: Jeff S07/11/2016
First of all, let me start by saying that the product I ordered and received was exactly what I needed and the price point was very agreeable. Your site was very comprehensive with the number of products for varying applications.
What was the most beneficial to me was that you had a toll free customer support line that I utilized. First of all the representative that answered my call was polite and professional. I would also like to impress upon you that it was the knowledge of this particular gentleman (I can recall his name) that helped me make my decision.
I have several trailers and I know the inner workings of them very well but I learned something from your staff member to make my decision making process easier and more decisive.
I can see that the management has chosen their staff wisely and trained them well. It is for this reason that I seek out businesses such as yours to do business with.
I would just like to conclude in saying, congratulations on your success and I wish you the best in the future. Keep up the good work.
by: Trent08/10/2021
Purchased two hub assemblies. Both hubs arrived with bearings that had only a small amount of grease. Both will need to be repacked. Paint is chipped off in many places on one hub.
by: Barry08/10/2022
Yep this one is perfect ! Thank you for the great customer service
Heather A.
8/17/2022
Oh man! This hub definitely comes in a carrying case so I am not sure why that happened. I sent your review to customer service to assist you.
by: Dave E10/01/2018
I recently had a hub failure on my boat trailer. etrailer was able to help me identify the correct replacement parts needed and the parts shipped same day. Parts arrived next day in perfect condition. Thanks for the great customer support!
by: Michael11/22/2018
Bought two for my popup. Fit perfectly! Only reason for 4 stars is one of the packs didn’t have a cotter pin.
by: Darwin09/02/2017
Liked the way it came in a hard case. Will be used as a back up for my boat trailer should I burn one up on the road.
by: Cory 08/13/2022
Came quickly and exactly as advertised
by: Derek07/26/2019
Easy website to maneuver. Product fit as it said it was. Seems to be a very high quality product. Shipped in a thimly matter. Very satisfied
by: Alfred01/18/2018
Excellent customer service. Quick delivery. Returns accepted, refund granted, return shipping at no charge.
Couldn't ask for more!!!!
by: Mark K12/16/2021
Thank you so much Chelsea!
I receive the hubs in record (1 day time) which was a pleasant surprise. Cudos to you on job well done.
Thanks again and you have a wonderful Christmas and Happy New Year! from Chicago
by: Warren A.10/18/2015
Good part. Excellent customer service and quick delivery.
by: Greg08/30/2017
Exactly what I needed at the correct price. Shipping was fast and packaged well. Solved my problem and kept me on the road.
by: Patrick 09/28/2017
The customer service blows me away. so much knowledge, responsive, easy to find references, I can't say enough good things.
by: David 12/06/2020
fast delivery
product was as adver tised
by: Stephanie 07/03/2020
Perfect fit. Awesome service.
25
36
Show More Reviews
See what our Experts say about this CE Smith Trailer Hubs and Drums
- Replacement Hub for a 2005 Trailstar PT175The CE Smith trailer hub # CE13311 is likely going to work for your 2005 Trailstar PT175. But to be absolutely sure you can check the inner and outer bearing numbers stamped into the sides of the bearings. If they are L44649 bearings then the CE Smith hub will fit.
view full answer... - Compatibility of Grease on CE Smith Trailer Hub AssemblyFrom what I have found, the StarBrite Marine Grease you are talking about has a Lithium Complex base type. The grease used in the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13311 is a Calcium Sulfonate Complex base type. Based on this information the two are compatible so you will not have any issues using them together.
view full answer... - Does CE Smith Trailer Hub Assembly Come With Grease CapWhile I'm not 100 percent certain what part you are referring to specifically in regards to grease fitting, the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13311 comes with the grease cap and grease seal, along with the bearings, races, lug nuts, cotter pin, and carrying case.
view full answer... - How to Tell Difference Between 2,700 and 3,500 lb AxlesTypically the axle diameter is a good way to determine capacity but with the capacities being as close as your they could be the same diameter. A 3,500 lb axle should be 2-3/8 inches in diameter. You can also check the plate up near the coupler of the trailer that has the VIN. Typically axle capacities are listed there. You may even be able to find a similar rating on the axle itself depending on the brand of it. Aside from that it would come down to more info on the hubs. With the bearing...
view full answer... - 94 Shorelander PWC Trailer Replacement Hubs I recommend the CE Smith Trailer Hub Assembly item # CE13311. These hubs are rated for 2,700-lb Axles have a 5 on 4-1/2 bolt pattern and come pre-greased. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease. They are also made for 8 inch wheels.
view full answer... - Replacement Trailer Hub for an EZ-Loader Boat TrailerThanks for the photo! Using the VIN I was able to gather the necessary information needed to help you find the correct idler hubs. For this, I recommend the CE Smith Trailer Hub Assembly part # CE13311. This hub uses a L44649 inner/outer bearing, 12192TB grease seal, and has a 5 on 4-1/2" bolt pattern. This will be a direct replacement for the idler hubs you have on your trailer now and even comes pre-greased. I have attached a review video for you as well.
view full answer...
- Will the CE Smith Trailer Hub Fit a Shorlander Trailer 2800lbYes, the CE Smith Trailer Hub Assembly, # CE13311, will work well on your Shorelander trailer axle. The hubs will come pre-greased and ready to install. The hub has a 5 on 4-1/2 inch bolt pattern and will include a dust cap and new lug nuts.
view full answer... - Depth of CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb AxleThe depth or length of the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles # CE13311 that you referenced is 4 inches.
view full answer... - Correct Replacement Idler Hub for Triton Jet Ski Trailer with 2,700 lb AxlesThe CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles part # CE13311 is correct for a Triton Jet Ski Trailer with 2,700 lb axles. It uses L44649 bearings and has a 5 on 4-1/2" bolt pattern.
view full answer... - Hub Replacement Recommendation for 1990 Shorelandr Boat Trailer B148/1610I can help you pick out a hub for your trailer. Thank you for giving me the bearing, spindle, and bolt pattern information. That is exactly what I need to find the right hub. For a hub that will fit your spindle that comes with the bearings already installed in the hub and with it pre-greased and ready to go I would recommend the CE Smith Hub part # CE13311. Since this comes with a carrying case this also works great as a spare hub to bring with you in case of a problem while towing.
view full answer... - Pre-Greased Trailer Hub for a Spindle that Requires L44649 Bearings and a 1.25 Inch SealYes, in the picture you submitted it states the spindle accepts hubs that use L44649 bearings with a seal inner diameter of 1.25 inches. The CE Smith hub assembly # CE13311 does indeed match that criteria and will fit the spindle.
view full answer... - Replacement Hub Assembly For EZ Loader Trailer Hub 300-020883You will need the CE Smith Trailer Hub Assembly # CE13311 for a replacement hub on your EZ Loader Trailer with hub 300-020883. Your hub uses a grease seal that has an inner diameter of 1.249". The CE Smith Trailer Idler Hub Assembly # CE13315 that you found has a grease seal that has a 1.50" inner diameter.
view full answer... - Replacement Hub Recommendation for EZ Loader Boat Tariler with 5 Lub WheelsThanks for the photo! Using the VIN I was able to gather the necessary information needed to help you find the correct idler hubs. For this, I recommend the CE Smith Trailer Hub Assembly part # CE13311. This hub uses a L44649 inner/outer bearing, 12192TB grease seal, and has a 5 on 4-1/2" bolt pattern. This will be a direct replacement for the idler hubs you have on your trailer now and even comes pre-greased.
view full answer...
- Which Replacement Hub for Shoreland'r SLR22L Boat TrailerAccording to Shorlandr, your SLR22L trailer uses hubs with a L44649 inner and outer bearing. The # CE13511 hub you mentioned uses a different inner bearing, so it won't work for you. The good news is that the # CE13311 is the correct hub, assuming your existing hub has a 5 lug on a 4-1/2 inch bolt circle. Or, even better, since it's a boat trailer we offer a corrosion resistant galvanized version of the 5 on 4-1/2 as well, available as part # CE13315. The replacement hubs include 1/2-20...
view full answer... - Recommended Idler Hub w/ a 5 on 4-1/2 Lug Pattern that Fits L44649 Inner and Outer Bearings I need a lot more information. The VIN number tells me nothing. If you could email me back the numbers stamped into the side of the bearings inside your hub and your lug nut pattern I will be able to track down something for you. Also, is this a hub drum brake set up, idler hub, disc brakes? I saw you were looking at the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles item # CE13311 but I did not want to assume. This hub fits a Inner and outer bearing of item # L44649...
view full answer... - Replacement Hubs for Continental Trailer Kayak Trailer Thank you for providing all of that helpful information. Based on what you have, the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13311 will fit and work well as a replacement. These use a NGLI #2 marine-grade grease like the # L11390 so it will be perfectly compatible with your current grease.
view full answer... - Recommended Replacement Idler Hub for Karavan Boat Trailer with L44649 BearingsIf you're just looking for an idler hub, the CE Smith Trailer Hub Assembly with Carrying Case part # CE13109 for 4 on 4" or part # CE13311 for 5 on 4-1/2" are a great pre-greased option with carry case so you can keep one nearby when ready to use.
view full answer... - Correct Replacement Hub for CE Smith Multi Sport TrailersThe correct replacement hub for the CE Smith Multi Sport Trailers like part # CE48870 is the CE Smith Trailer Hub Assembly part # CE13311.
view full answer... - Recommended Replacement Hub For A CE Smith CE48870 TrailerI contacted CE Smith and the # CE48870 Multi Sport Plus Boat and Kayak Trailer does use the larger 1-1/16" spindles due to its larger size and capacity. The CE Smith # CE13210 hub is designed for use with the 1" spindle, so it will not be compatible with your trailer, unfortunately. With that said, you will have 2 options. First, you can replace the hubs with the # CE13311 kit. This will include everything the same as what you have, but will have the larger bearings to fit over the spindle....
view full answer... - EZ Loader Boat Trailer Taillight Kit Recommendation and How to Pick Out BearingsI really wish there was a way to determine what bearings a trailer needed without actually pulling the wheel off and checking, but there isn't. The only two solution I have for you would be to remove the hubs and get the numbers that are stamped on the bearing or for you to remove the hubs and use a digital or dial caliper to measure where the bearings and seal ride (see pic). With that info I can help you figure out what you need. For the money the best LED trailer taillight kit would...
view full answer... - What Type of Grease Comes in CE Smith Pre-Greased Trailer HubsThe CE Smith trailer hubs we offer that are pre-greased like the part # CE13311 come with the LMX Red grease like the # L11390.
view full answer... - Replacement Idler Hub for 2001 EZ-Loader Boat Trailer with 5 on 4-1/2 Inch HubsThank you for your VIN. I was able to use this and determine that you need the CE Smith Trailer Hub Assembly part # CE13311 which comes pre-greased.
view full answer... - Replacement Normal Size Hub For BT150 Short HubThere is a replacement for the short BT150 hub; what you need is the CE Smith Trailer Hub Assembly # CE13311.
view full answer... - How to Find the Correct Grease Seals for a 2002 Trailstar Boat TrailerIn order to make sure you have the proper grease seal for your hub and spindle, I would need you to measure the spindle where the grease seal rides and the trailer hub where the grease seal sits. These measurements will need to be taken to the nearest thousandth of an inch with a digital caliper. Once you can provide me with them, I would be glad to see if the grease seal you have now is correct or if we have a better one for you. The double lip grease seal as you mentioned will be much...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
9/30/2021
Customer service will be reaching out to you.