What Size Idler Hubs and Bearing Buddy Protectors Fit a Shoreland'r LUV40TMXWMS1-16 Boat Trailer?
Published 03/01/2024
Products Featured in This Question
Question:
Have a shorelandr trailer model LUV40TMXWMS1-16. Looking to get 4 hub kitsc that my bearing buddies can be used on. It’s for a dual axel boat trailer.
asked by: Paul M
Expert Reply:
Based on the information I could find it appears your Shoreland'r LUV40TMXWMS1-16 uses standard 3,500lb axle and hubs. I always recommend verifying this as I have seen manufacturers make changes or trailers get axles changed due to being damaged in transit. These hubs will fit the 1.98" Bearing Buddy # BB1980A-SS. The CE Smith Trailer Idler Hub Assembly # CE13515 you found does contain the correct size bearings and grease seal for a standard 3,500lb axle and will also fit the Bearing Buddy protectors.
Please let me know if you find a different size spindle on your trailer or if you require disc or drum brakes as you may need different components since not all the trailers had the same brakes from the factory.
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Shop: Bearing Buddy Bearing Protectors - Model 1968 - Chrome Plated (Pair)
- Shop: Dexter 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Zinc - 3,500 lbs
- Q&A: Recommended Replacement 1.975-Inch Dust Cap for Heartland Trailer with 3500-lb Axles
- Q&A: Replacement Bearings and Bearing Buddies for ShoreLand'r Profile 2000
- Q&A: Looking For Bearing Buddies For A 2005 Shorelander Trailer
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: Recommended Replacement Disc Brake Assembly For A 2008 Shorelandr Boat Trailer
- Shop: Lippert Replacement Threshold for RV Entry Door - 27-1/8" x 1-1/2" - Aluminum
- Shop: Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers -3-1/8" Shackle Straps
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/4" Center
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Q&A: Looking For Pre-Grease Hub Assembly For 2008 Bear Trailer
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: Trailer Lighting Requirements
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub