Availability Of Galvanized Idler Hubs To Replace Dexter 8-248 Idler Hubs
Updated 07/19/2022 | Published 07/17/2022
Products Featured in This Question
Question:
Do you stock Dexter 5x4.5 1750 galvanized hub kits? I think that is what I have. The numbers on the hub backside are 8-248 , mta 21, and 194. Thanks
asked by: Andy W
Expert Reply:
We do have the etrailer Easy Grease Trailer Idler Hub Assembly # AKIHUB-545-35-G-EZ-K and Trailer Idler Hub Assembly # AKIHUB-545-35-G-K available in a galvanized finish. Currently the Dexter 8-248 Idler Hub # 84545BX we only carry in the black finish.
We also have the CE Smith Trailer Idler Hub Assembly w/ Case # CE13515 that is also galvanized or the Kodiak Trailer Hub # KH84545S made from stainless steel. The stainless will give you the best corrosion resistance of all the hubs. You will need the Inner Bearing # L68149, Outer Bearing # L44649, Grease Seal # 58846, Grease Cap # F001518 and 5 Lug Nuts # AM26NR per hub to complete the Kodiak hub like the other kits offer.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Search Results: trailer hitch
- Search Results: 2 inch boat winch strap
- Search Results: leaf spring shackles
- Search Results: trailer axles
- Search Results: leaf spring shackle
- Search Results: gooseneck coupler
- Search Results: trailer hitch ball mount
- Shop: Kodiak Trailer Hub for 3,500-lb Axles - 5 on 4-1/2 - Stainless Steel
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
- Shop: Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs
- Shop: Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs.
- Shop: Zinc Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Does Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 Have Zinc Plating
- Q&A: Mounting Hardware Needed To Install 3,500LB Axle & Double Eye Leaf Springs on a Torsion Axle Trailer
- Q&A: How To Flip Square Trailer Axle For Ground Clearance
- Q&A: Dimensions of Bolts and Shacles of Dexter Heavy Duty Suspension kit # K71-403-00
- Q&A: Dimensions Of Shackle Bolt For Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00
- Q&A: Replacement Idler Hubs For a 1990's Calkins Boat Trailer With 45264 Idler Hubs
- Q&A: Does 3,500 lb Leaf Spring Need to Have Same Number of Leaves as Original
- Video: Hand Winch Strap with Safety Hook, 2" Wide x 20' Long Spec Review
- Video: Detailed Breakdown of the Dexter Single Axle Heavy Duty Suspension Kit
- Video: Feature Breakdown: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles
- Video: Feature Review Dexter Single Axle Heavy Duty Suspension Kit
- Video: etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles Feature Review
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Feature Breakdown: CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals