Is The CE Smith Idler Hub Compatible With DeeMax Slip On Disc Brake Rotor For 3,500LB Axle?
Updated 04/18/2023 | Published 04/16/2023
Products Featured in This Question
Question:
The description says Idler Hub, can I use this with my slip on rotor disc brake axle?
asked by: Max W
Expert Reply:
Yes, the CE Smith Trailer Idler Hub Assembly # CE13515 can be used with a slip on rotor like the DeeMaxx Disc Brake Kit # DE42FR uses. We do also have the DeeMaxx Trailer Idler Hub # DE36VR if you would like to stick with the same manufacturer for these components. One nice feature about the DeeMax idler hub is they stamp the bearing and seal information into the hub so you will not have to pull the hub apart if you forgot what size parts you need. You will need the Inner Bearing # L68149, Outer Bearing # L44649 and Grease Seal # 58846 with the Deemax idler hub as they are not included.
Product Page this Question was Asked From
CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Search Results: deemaxx
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 3.5K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Search Results: 010~168~00
- Search Results: am3s450
- Q&A: Can I Use Different Grease w/ the CE Smith Trailer Idler Hub Assembly?
- Article: How to Bleed Your Trailer Surge Brakes
- Video: Neighbor Interaction with the DeeMaxx Disc Brake Kit
- Video: Replacement Inner Member for Dexter DX7.5L Actuator Spec Review
- Video: All You Need to Know About the Double Lip Seal for 3,700-lb Marine Hubs
- Q&A: Bearings and Grease Seal Recommendation for Titan Premier Disc Brake Kit # T2HRCM10DAC
- Search Results: dx89fr
- Q&A: Identifying Capacity and Replacement Parts for UFP Axle
- Search Results: deemaxx trailer brakes
- Search Results: deemaxx brake actuator
- Q&A: Disc Brake Kit Recommendation for 3,500 lb Axle and 5 on 4-1/2" Bolt Pattern Idler Hub
- Search Results: surge brake pin
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Shop: Suspension Enhancement
- Video: Don't Forget the Brake Lines | Tips from the Manufacturer
- Q&A: Replacement Bearing Kit and Brakes for a 2003 Boat Trailer with 3,500 lb Axles
- Video: Hands-On with the Dexter Premier Disc Brake Kit
- Video: Brake Mounting Bolt for 7" and 10" Brake Assemblies Feature Review
- Q&A: Demco vs. etrailer Hydraulic Dacromet 3,500 lb Trailer Brakes
on Trailer Hubs and Drums
