See what our Experts say about this Yakima Roof Rack

• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Will the Thule Hullavator Pro Fit on Yakima HD Bars
  Yes. The Thule Hullavator Pro # TH898 will fit on Yakima HD Crossbars like the # Y01157 mounted either in the channels or using the clamp on mounts. Since the Hullavator Pro does not come with locks included you may want to consider adding those with the Thule One-Key System Lock Cylinders - Qty 2 # TH450200 to help keep the carrier and boats from walking away while you're out on the water.
  view full answer...
• Is Weight Capacity of Yakima CoreBar Crossbars Per Bar or for Pair
  The weight capacity of the Yakima CoreBar Crossbars like part # Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part # Y01157 which have a 500 lb weight capacity. Please note, the feet and or vehicle roof may be rated lower and in which case you would abide by the lowest of the three components whether that be the crossbars, feet, or vehicle.
  view full answer...
• Yakima Roof Rack for 2023 Subaru Outback With Thule Hullavators
  Hi Tina; I also prefer Yakima so I'm glad we're on the same page. For your 2023 Outback and Hullavators I recommend the JetStream roof rack. You will need the following: -Yakima JetStream Crossbars # Y00426 -SkyLine Towers for Yakima Crossbars # Y53TR -Landing Pad 27 for Yakima SkyLine And Control Towers # Y46VR The JetStream crossbars are extremely quiet so you won't have a bunch of road noise added to your day to day driving. If you want to keep your rack secure you can also add the...
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Is the Yakima Bedrock HD System Compatible with Yakima Jetstream Bars
  I might have a solution for you, but the Yakima Bedrock HD System # Y01160-58 are only compatible with the Yakima HD bars like the # Y01157. The Yakima Bedrock HD, Overhaul HD # Y01151-58 and Outpost HD # Y01152-58 systems are all only compatible with Yakima HD bars and there are no adapters available for the footpacks on the HD systems to allow for the attachment of other styles of bars. If you can let me know what kind of truck you have, I might be able to locate a truck bed rack system...
  view full answer...
• Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
  Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
  view full answer...
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Does The Length of the Yakima HD Crossbars Include The End Caps?
  The 60" Yakima HD Crossbars # Y01157 are going to be 60" from end to end including the caps. As you need 60" of T-slot you would need to step up to the 68" Crossbars # Y01158.
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Will RhinoRack Batwing Awning Work with Yakima HD bars
  Yes, the Rhino-Rack Batwing Awning Driver's Side # RR33100, or # RR33200 Passenger's Side are compatible with the Yakima HD Crossbars, like # Y01157. The Batwing uses the top channel on your Yakima bars to attach to them with the included hardware. Both the Yakima HD bars and the Rhino-Rack Vortex bars use a 7/16 inch wide top channel, so you'll just want to follow the same instructions as if you were mounting the awning on the Vortex bars. I've attached the complete installation instructions...
  view full answer...
  
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Correct Yakima Towers for a 2023 Toyota Sequoia
  The towers compatible with your 2023 Toyota Sequoia is going to be those TimberLine Towers for Yakima Crossbars # Y33TR. These towers will work with Yakima's JetStream # Y00426, HD # Y01157, CoreBar # Y00422, and RoundBars # Y00409.
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Yakima HD Crossbar Rack For Retrax Pro XR Tonneau Cover
  You'll need an adapter but yes, the Yakima HD crossbars will work with the Retrax Pro XR tonneau cover. What you can use is the following: - Yakima HD Crossbars - 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure to get the correct length - Landing Pad 1 # Y00221 (you'll need to order Qty 2 of this part number) - SkyLine Towers for Yakima Crossbars # Y53TR - HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03541
  view full answer...
• What Crossbar System, Platform, Hitch, and Bike Rack do You Recommend for My 2005 Honda Element?
  Yakima does make a square crossbar system for your bare roof 2005 Honda Element. I recommend the following parts: -Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 -Towers # Y53TR -Adapters # Y03541 -Landing Pads # Y00229 As far as adding more racks to the setup, the only way to do it would be by attaching something like the SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long # 298-SX6000B to your roof as long as there is enough space either between,...
  view full answer...
  
• Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4
  The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
  view full answer...
• Weight Capacity of the Yakima HD Crossbars
  The Yakima HD Crossbar Set, part # Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part # YA34FR, states that its weight capacity is 500 lbs because these bars are intended to be used as a set (either with the same one or with another HD bar of a different length). Even with just the 500 lbs, this number is more than likely much higher than you can put on the top of your vehicle. Though these crossbars...
  view full answer...
• Using the Rhino-Rack Kayak Carrier with Yakima HD Crossbars
  The Rhino-Rack Crossbar Adapter, part # KC-FK8, is designed to fit the 2 Kayak Carrier, part # S512-S512X, into bars with a C-channel (or T-track). The Yakima HD Crossbars, part # Y01157, do have a T-track, so this adapter should work for you. I called Rhino-Rack, and they also stated that it should work. However, since this is not 100% confirmed, if you would rather go with a kayak carrier that is already designed to work with square bars like yours, we have that here. It's the Malone...
  view full answer...
• Is Yakima MegaWarrior Cargo Basket Compatible With Yakima HD Crossbars
  You can absolutely use Yakima HD crossbars with the Yakima MegaWarrior Large Roof Rack Cargo Basket # Y07080. The two are compatible, but you will need to use the clamps to install the MegaWarrior as there is not a way to mount this basket in the bars' channel. The only thing I do recommend adding to this basket, in order to protect your investment, is the Locking Brackets with SKS Cores # Y07064. As for the Yakima HD crossbars, they are available in a number of different sizes: 55 inches...
  view full answer...
• Correct Size Yakima HD Crossbar for a 2016 Ford F-150
  The recommended size Yakima HD Crossbar for a 2016 Ford F-150 is 60", part # Y01157, this should provide around a 3-4" overhang which is standard. If you want to go with a longer option like 68" part # Y01158, you can do so but you'd have more overhang. This could be calculated for each bar size using the info above. In order to complete this setup you'll need the following; part # Y28TR, part # Y03541, and part # Y06122.
  view full answer...
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Roof Rack and Ski Carrier to Fit 2019 Hyundai Santa Fe with Naked Roof
  Yakima has a really great roof rack for your 2019 Hyundai Santa Fe with a naked roof with the Baseline JetStream bar rack part numbers # Y28TR, # Y06151, # Y06154, and # Y00425 (see attached picture). This will give you an extremely high quality roof rack that has aero bars which will give you minimal wind noise. Then for a ski rack we have the FatCat EVO part # Y03096 which will hold 6 skis or part # Y03095 for up to 4. I attached a review video for this carrier for you to check out as well.
  view full answer...
  
• Kayak Rack and Load Assist for a 2018 Toyota Prius Prime Without Glass Roof
  Hey, Nick! Happy to help out. The best and easiest kayak rack to use with a load assist is the Thule Hullavator Pro # TH898. One big advantage is that everything is built into the carrier itself, here are no extra parts to remove or store. Personally, I’m not a fan of other load-assist options like the Malone DownLoader # MPG114MD-351XL, since you have to store the Telos legs inside your vehicle while traveling. That’s especially inconvenient if you’re working with a smaller vehicle. I...
  view full answer...
• How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?
  According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
  view full answer...
• Recommended Roof Rack for Fiat 500x With Panoramic Glass Sunroof
  There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars # INXB100-108, Flush Feet for Aero Crossbars # INXS200, and Custom Fit Kit # INK482. This rack has a 100 lbs weight capacity though I do recommend checking your Fiat's manual to confirm what the actual capacity is. The aero crossbars are going to give you a quiet ride and they also have integrated T-slots so you can carry accessories that way. I've...
  view full answer...
  
• Will the Thule Force XT L Fit My 2020 BMW X5?
  Yes, you will be able to fit the Thule Force XT L # TH6357B on your 2020 BMW X5's roof. Not only do you have enough roof for the required crossbar spread of 23-5/8 - 33 inches, you will also be able to mount the box to your roof and fully open your rear hatch. If you are wanting to go bigger, the Thule Force XT XL # TH6358B and XXL # TH6359B will fit as well. As far as mounting, you will need a crossbar system in order to secure the Force XT XXL to your roof. The setup you need depends...
  view full answer...
• Best Roof Rack for 2020 Kia Telluride With Naked Roof and How Does It Attach
  There are two roof configurations for a 2020 Kia Telluride, bare roof and flush side rails. The roof rack system for a bare roof attaches to the door jambs via car clips whereas the system for flush side rails attaches to the flush side rails. I recommend the Yakima JetStream Crossbar System part # Y00426, part # Y28TR, part # Y06125, and part # Y06165 if you have a bare roof. The Yakima Crossbar system is best because it has a custom fit for the best overall look, aero crossbars for...
  view full answer...
• Roof Rack Fit on 2012 Toyota Venza With Panoramic Sunroof
  There is one roof rack that is a confirmed fit for your 2012 Toyota Venza with a panoramic sunroof, though the sunroof should not be opened with the rack on. There isn't a roof rack available for your Venza that is going to allow normal use of the sunroof when the rack is on, but you can remove the rack if you like when you aren't using it in order to utilize the sunroof. The roof rack that fits your '12 Venza with a panoramic roof is an exceptionally nice one from Yakima, and consists...
  view full answer...
• Do You Recommend the Thule Motion XT XL or the Thule Motion XT XXL for My 2021 Nissan Rogue?
  In order to determine the compatibility of either the Thule Motion XT XL # TH629806 or the Thule Motion XT XXL # TH629906, it truly depends on if you have a bare roof, raised rails, or a factory roof rack currently installed. The reason why this matters is because not only do crossbars come with different heights and widths, but your roof has different available length based on what roof setup you have. The roof setup is important in determining if you can fully open the rear hatch of your...
  view full answer...
• Square Bar Roof Rack that Fits 2020 Ram 1500 Quad Cab
  Thule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
  view full answer...
• Recommended Roof Rack and Bike Rack for a 2016 Lexus GSF
  The best option to transport a bike with your 2016 Lexus GSF is going to be to install a roof rack and attach a bike rack. The trunk mounted ones like item # SA805BL have mixed results and won't work with cars with spoilers. It doesn't look like your Lexus has any rails so to add a roof rack you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip...
  view full answer...
• Will a Yakima Roof Rack System Fit My 2020 Toyota Highlander LE?
  I confirmed with Yakima that mounting points that are on your bare roof of your 2020 Toyota Highlander will fit a roof rack system. After you pop off the tab that covers the mounting points, there is a screw that you will use to attach a roof rack system. I went ahead and attached a video that shows how you would attach a Yakima roof rack system on the 2020 Toyota Highlander. For the parts you need for that setup, you will need the following parts: - Yakima JetStream Crossbars - Aluminum...
  view full answer...
• What is Needed to Attach Yakima JetStream Crossbars to 2017 Honda CR-V With Bare Roof
  Hello Zeke, So we can get your 2017 Honda CR-V set up to mount Yakima JetStream Crossbars # Y00425, though there aren't actually different options for this. Reason for that is you can't mix and match different manufacturers parts because they won't fit together. That means to put the JetStream crossbars on the bare roof of your 2017 Honda CR-V you would have to use the following parts: - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - BaseClip Fit Kit # Y06188 - BaseClip...
  view full answer...
• Roof Rack and Board Carrier Recommendation for 2016 Toyota Prius V with Glass Roof
  For your 2016 Toyota Prius V you will need to install a roof rack to carry the boards you mentioned. Unfortunately only Yakima makes roof racks for your vehicle and they aren't exactly super cheap. So for that you would want the Yakima CoreBar part numbers # Y00425, # Y28TR, # Y06117, # Y06174. Which with that you'd be able to use the LockRack kpart # LR59FR that you referenced. This will attach to the crossbar by the top channel.
  view full answer...
• Compatibility of 3 Bike Rack on 2015 Toyota Prius
  The Reese Q-Slot Platform-Style 2 Bike Rack is a fit for your 2015 Prius but has been discontinued. If you already have the rack it will work very well for you. I recommend using the included pin and clip for a secure fit in the hitch and then using a cable lock like # e98891 to secure your bikes to the rack. The 2 inch receiver only Reese Q-Slot Platform-Style 2 Bike and 4 Bike Rack PS63138 (also discontinued) was a 2 or 4 bike carrier, but would NOT work on your 2015 Toyota Prius...
  view full answer...
• Is There A Trailer Hitch Available For A 2019 Honda Civic Sedan With A Center Exhaust
  Hi Hamza, Honda Civic models with a center exhaust unfortunately prevent the installation of a trailer hitch so the only way to haul your bike(s) would be to use a trunk mounted bike rack or roof rack mounted bike rack. If you'd prefer a trunk mounted bike rack then I recommend the Yakima FullBack 2 Bike Rack # Y02634. If you want to go with a roof rack mounted back rack and don't currently have a roof rack then you'll need the following components: Yakima JetStream Crossbars # Y00425 BaseLine...
  view full answer...
• Can Yakima Roof Rack From 2000 Ford F250 Be Used On A 2025 Ford F350?
  Hello Lori, thanks for reaching out. You may be able to re use certain components from your old Yakima roof rack, but I would need to know specifically what parts you have in order to say for sure. If you have the Yakima BaseLine towers like part # Y28TR, those could be used on the 2025 F350, you would just need a new fit kit # Y06185. You might be able to re use you crossbars but again it depends what you have. Yakima recommends a 58" or 60" crossbar for the 2025 F350. If you can tell...
  view full answer...
• Recommended Roof Rack for a 2022 Honda Insight
  Hey Andy! The 50" crossbars on the Yakima BaseLine Roof Rack Kit item # Y88UB can be swapped out but the next largest size is the 60" Long item # Y00429 so I do not think that's going to be a viable option. By law the crossbars are not supposed to stick out past the rear view mirrors. If you want to pursue this option you'll need the following parts: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• Recommended Rhino Rack Roof Rack With Bike Rack And Surfboard Carrier For 2015 Ford F-150
  For your 2015 Ford F-150 SuperCrew Cab, I recommend the Rhino Rack Roof Rack consisting of: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2, # RRVA150B-2 Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Qty 4 # RRRLKVA Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof # DK427 The custom fit kit is designed to specifically fit your vehicle curves and prevent marring and scratches as you mentioned. This kit is rated to carry 165 lbs....
  view full answer...
• Roof Rack and Cargo Box Recommendation for 2017 Honda Accord Sedan
  The Yakima roof rack you referenced part numbers # Y00408, # Y28TR, # Y03536, and # Y06148 is a confirmed fit for your 2017 Honda Accord sedan and would be an excellent option for carrying a roof cargo box. Then for a cargo box the Thule Force part # TH6357B would fit this rack and work great. I attached a review video for this box installed on a similar sized vehicle as your Accord sedan. I really like the Thule roof racks and cargo baskets as they are very well made, easy to use, and...
  view full answer...
• Recommendation for Transporting 5 Bikes on a 2019 Ford Fiesta Hatchback
  The best route is to mount your 2 adult bikes to a trunk bike rack and mount the 3 children's bikes onto the roof of your 2019 Ford Fiesta hatchback. For the trunk rack, I recommend going with the Saris Bones 2 # SA805BL. The Bones 2 comes with a 35 pound per-bike weight capacity and has anti-sway cradles to eliminate movement during transport. It is important to note that if you have women's-style frames or step-thru adult frames, you need to use a bike frame adapter bar # 64005 for those...
  view full answer...
• Roof Rack Options that Fit 2012 Chrysler 300
  What install video are you referring to? Or what part number?
  view full answer...
• Yakima Roof Rack Parts List for a 2021 Dodge Durango with a Bare Roof
  Hey Kimlee, thanks for reaching out! Yes, the 60" # Y00426 JetStream Bars, BaseLine Towers # Y28TR, and 2 sets of the BaseClip Fit Kit # Y06180 will also fit your 2021 Dodge Durango with a bare roof (lock core kit # Y07204 optional). We do ship these to Canada as well!
  view full answer...
• Roof Rack Recommendation for 2013 GMC Terrain for Carrying Thule Hullavator
  For your 2013 GMC Terrain with a naked roof you would want a Yakima roof rack like the JetStream part # Y00425, # Y28TR, and # Y06146 and you'd easily be able to carry a Hullavator # TH898. The Hullavator needs a rack that over hangs past the feet a few inches and can install into the top channel of this rack for an easy and secure install.
  view full answer...
• Recommended Roof Rack For Attaching A Thule Hullavator To A 2021 Toyota Highlander
  To attach the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs # TH898 to your 2021 Toyota Highlander you'll need a roof rack that has a T-Slot in the crossbars for the Hullavator to slide into. Currently the only brand of roof racks we carry for your vehicle that are compatible with your flush mounted rails is Yakima. I recommend the following parts to complete your roof rack: Yakima HD Crossbars - 55" Long # Y01156 SkyLine Towers # Y53TR Landing Pad 28 # Y66VR HD...
  view full answer...
  
• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
  Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...
  
• Recommended Roof Rack for Mounting a Thule Hullavator Pro on a 2021 Toyota RAV4
  The Thule Hullavator Pro, part # TH898, does in fact need crossbars that extend 4" - 8" beyond the feet. To use the flush rails on your 2021 Toyota RAV4, you will need a roof rack that has feet that are compatible with the rails. With those two stipulations in mind, the Thule WingBar Evos don't look like they will provide enough clearance with their 47" of crossbar length. Instead, I recommend the Yakima HD Crossbars, part # Y01156. They are 55" long, so they will have the extension you...
  view full answer...
• Parts Needed To Mount Yakima HD Bars To RSI Smartcap Evo Sport
  Hello Reed, thanks for reaching out. I looked up the RSI Smartcap Evo Sport and it looks like this already has T-tracks built in. You can use the TrackTowers # Y52AV and the HD Bar SL Adapters # Y03541 to mount the Yakima HD bars such as the # Y01158 which are 68" long. I do suggest you measure the distance between the tracks to make sure you get an appropriately sized crossbar.
  view full answer...
• Recommended Roof Rack For Installing A Yakima ShowDown Kayak Carrier On A 2021 Toyota Highlander
  For your 2021 Toyota Highlander with flush mounted rails I recommend the Roof Rack by Yakima which includes: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 # Y01156 SkyLine Towers for Yakima Crossbars # Y53TR Landing Pad 28 for Yakima SkyLine And Control Towers - Qty 4 # Y66VR HD Bar SL Adapter # Y03541 The Yakima ShowDown Kayak or SUP Carrier and Lift Assist w/ Tie-Downs # Y04081 will clamp onto the crossbars of this roof rack system for an easy peasy installation. You will...
  view full answer...
• Parts Needed To Add 60" Yakima HD Crossbars To 2025 Subaru Outback Wilderness
  Hello Carol, welcome back. It is possible to use the Yakima HD Crossbars # Y01157 on your 2025 Subaru Outback Wilderness with the fixed raised bars. What you will need is the TimberLine Towers # Y33TR and the HD Bar Adapter # Y03541 to complete this setup. The HD bars are super solid so this is a good choice for two Hullavators and sea kayaks. Just please keep in mind that although the HD bars do have a 500 lb weight capacity, the TimberLine towers have a 220 lb weight capacity so this...
  view full answer...
• Can You Use the Yakima HD Bar Adapter part # Y03541 to Add Yakima HD Bars to the RetraxPRO XR?
  Hi Daniel, The short answer is yes! You can use the Yakima HD Bar Adapters for Yakima Streamline Towers part # Y03541 to use your Yakima crossbars in a RetraxPRO XR tonneau cover! You will need a few parts to accomplish this though: HD Bar SL Adapter for Yakima Towers part # Y03541 SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 1 for Yakima Control Towers part # Y00221 Yakima HD Crossbars- 60" Long # Y01157, 68" Long # Y01158, or 78" Long # Y01159 (you'll need to measure...
  view full answer...
• Lightweight Hitch Cargo Carrier for 2019 Tesla Model X
  The Curt cargo carrier part # C18100 is a lighter weight carrier due to it being made mostly out of aluminum. For a lighter weight option for your 2019 Tesla Model X with a hitch like the Draw Tite part # 76143 installed this would be a really great option. It weight just under 30 lbs. For a hitch lock that doubles as an anti-rattle device the part # 63232 would be a great option as well. This holds the shank of the carrier to the hitch tube so that movement and noise is removed. I attached...
  view full answer...
• Correct Size Inno Aero Crossbar for a 2015 Lexus GX 460
  The correct length Inno Aero Crossbar for a 2015 Lexus GX 460 is 48" for the front and 51" for the rear. The complete kit is composed of part # INXB123-130, part # INXS350, and part # INTR152. Unfortunately, the crossbars have channels underneath so you can only go so big and we can't recommend going with a larger size unfortunately.
  view full answer...
• Will Installing Track Roof Rack System on A.R.E. Topper Void Warranty
  Installing a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
  view full answer...
  
• Parts Needed To Add Single Yakima HD Crossbar To Roof Of a 2022 Toyota Tacoma Double Cab
  We do have a Single Yakima HD Crossbar # Y35FR which you can pair with the Two Towers # Y62TR. You will need the Adapters # Y03541 which we only carry as a set of 4 along with either the Front # Y06145 or Rear # Y06128 fit kit depending on if you plan on mounting it above the front doors or rear doors.
  view full answer...
• Recommended Roof Rack for Drywall and Lumber on 2019 Chevy Tahoe
  For your 2019 Tahoe, I recommend the Yakima system consisting of: Yakima HD Crossbars - Aluminum - Black - 60" Long # Y01157 SkyLine Towers # Y53TR HD Bar SL Adapters # Y03541 Landing Pad 17 # Y00243 I also recommend adding locks # Y07204 This system will give you strong crossbars with tie down points integrated as well as a load capacity of 165 lbs. It will work well for your drywall, plywood, and loads of lumber within that weight capacity.
  view full answer...
• Parts Needed For Adding Single Yakima HD Crossbar To Roof Of 2018 Chevrolet Silverado 1500
  The custom fit BaseClip Fit Kit # Y06122 which fits your 2018 Chevrolet Silverado 1500 extended cab is only designed to roof in the specific places given by Yakima. While you will be able to position the clips slightly forward or rearward of the measurements given by Yakima you will not be able to position them wherever you want due to how the clips are going to fit your door/roofline. Since you are only wanting to add 1 Yakima HD Crossbar # YA34FR you will want the Towers # Y62TR, HD Bar...
  view full answer...
• Can Thule Hullavator Fit on Yakima HD Roof Rack that Fits 2020 Subaru Ascent
  The Yakima HD bars do have a channel on the top of them that a Thule Hullavator part # TH898 could easily attach to. There's a cover that's on them which is designed to lower wind noise but that easily comes off and is trimmable. So for a Yakima HD roof rack that fits your 2020 Subaru Ascent with raised rails you'd just need the part numbers # Y01157, # Y03541, and # Y33TR with the Hullavator and you'd be set.
  view full answer...
• Roof Rack Options For Carrying The Thule Hullavator On A 2022 Chevy Tahoe
  Hi Kristen! The Thule Hullavator requires anywhere from 4 to 8 inches of overhang past the tower to make sure it will not come in contact with your 2022 Chevy Tahoe. You didn't mention if you were going to running just one or one on each side, so that is definitely something to take into account. That said, these are going to be your two best options: Aero Bar Option: Yakima JetStream Crossbars - Aluminum - Black - 70" Long - Qty 2 # Y00427 SightLine Towers for Yakima Crossbars - Flush...
  view full answer...
• Availability of Roof Rack That Fits 2 Old Town Sportsman Autopilot 120 Fishing Kayaks
  Hey Philip! It looks like the kayaks are 37" wide so 74" for both. The Yakima HD Crossbars # Y01159 are 78" long and can be installed using the # TimberLine Towers # Y33TR and HD Bar Adapter # Y03541. However, the specs show these weigh 152 lbs each, is that correct? The weight limit of the feet/towers is 220 lbs so if they are that heavy a roof rack won't be an option. Your vehicle roof capacity may not be high enough to hold them either. If the total weight of your kayaks is 304 lbs...
  view full answer...
• Will HD Bar SL Adapter Kit Fit the Yakima SightLine Towers
  Hey Dan, thanks for reaching out! Yes, the HD Bar SL Adapter Kit # Y03541 will fit the newer gen SightLine Towers # Y64AR. Do you already have the Yakima HD Bars? If not, what is the year/make/model of your vehicle so I can make sure you get the right length?
  view full answer...
• Recommended Ladder Rack And Roof Rack Combo For A 2024 Ford Maverick Hauling Ladders And Canoes
  Hey Rueben, Thule doesn't have a ladder rack fit for the 2024 Ford Maverick so you'll need to go with a different rack. The Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-57 would be the best option since its tower height can be adjusted from 19" up to 30" tall from the top of the bedrails. To add on an additional crossbar to the roof of your Maverick you would need the following components: BaseClip Fit Kit # Y06180 BaseLine Towers # Y62TR HD Bar SL Adapter # Y03541 Yakima...
  view full answer...
• Recommended Roof Rack For A 2014 Subaru Outback Hauling Two 31" Wide Kayaks
  Hey Erik, With two 31" wide kayaks you'll have to go pretty wide on the crossbars to have enough length to accommodate both. I recommend the following roof rack components: TimberLine Towers for Yakima Crossbars # Y33TR HD Bar SL Adapter # Y03541 Yakima HD Crossbars - 68" Long # Y01158 I'd then switch from the clamp-mount LockRack carrier # LR24VR to the channel-mount version # LR88FR. This would allow you to mount the carriers into the track on top of the crossbars for a super easy...
  view full answer...
• Can Yakima Tracks or HD Crossbars Be Used for Offroad Animal Rails on a 2020 Jeep Grand Cherokee
  Hey Drew, thanks for reaching out and providing all of your information! The Yakima 54" Tracks for Roof Racks # Y01127 could potentially work, but the hardware that comes with it was designed for going through a roof and since your metal pieces are a bit thinner you might have to get creative with how the Yakima tracks attached to your Offroad Animal rails. If you wanted to just switch your current setup to HD bars then you'll need the 60" Bars # Y01157 and the SL Adapter Kit # Y03541...
  view full answer...
• Parts Needed to Add Yakima Crossbars to Retrax Tonneau Cover with T-Slot Rails
  For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount # Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need an additional adapter). To mount the SkyLine Towers # Y53TR to your tonneau cover you would need the 2 of the Landing Pad 1 # Y00221 kits as well which is why I recommend the first kit I mentioned. Most truck ladder racks use longer crossbars...
  view full answer...
• Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked Roof
  To attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
  view full answer...
  
• Roof Rack for 2015 Toyota Tacoma Double Cab and Roof Rack for a Camper Shell
  I would be happy to help you find roof racks for both your 2015 Toyota Tacoma Double Cab and your camper shell. I'll start out with the roof rack for your truck. It is the 2015 Toyota Tacoma Roof Rack by Yakima. These 60" wide heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. The top and bottom channels let you add channel-mount accessories. The tie-down points in the endcaps let you easily secure cargo. I have linked a picture of this roof rack installed as...
  view full answer...
  
• Recommended Roof Rack For A 2023 Ford F-150 Lightning
  The Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR29XR would be the closest design to a "fixed" system like you were wanting. That being said, I personally prefer the Yakima HD line over most other roof rack/crossbar systems. The HD bars have a much sturdier design and come with fixed mounting points on each end of the crossbars so that you don't have to purchase additional components to secure your accessories. For your 2023 Ford F-150 Lightning you would need the following components...
  view full answer...
• Replacement Fit Kit for a Whispbar Roof Rack
  Hey Hollie! What kind of car do you have? Yakima replaced the Whispbar roof rack line with their JetStream roof rack line and I need to know your vehicle's year, make, model, and whether or not you have rails. If you could comment this information below, I would be more than happy to find you the correct replacement parts.
  view full answer...
• Will Trailer Hitch Fit a 2023 Hyundai Elantra Hybrid Limited
  I checked with all of our hitch manufacturers and while we have the Draw-Tite Hitch # DT75MR for a 2023 Hyundai Elantra, it isn't compatible with the N Line or Hybrid models. With that being said, we may still have a solution depending on what you planned to do with the hitch. For example, we have a roof rack fit from Yakima that would allow you to then mount a roof basket like the Rhino-Rack # RMCB or a bike rack like the Thule UpRide # TH599000. If you want to go with the roof rack here...
  view full answer...
• Parts Needed To Mount Yakima RoundBar Crossbars To A 2024 Ford Escape With A Naked Roof
  Hey John, Since you don't have factory rails to mount to you'll need the following components to mount your 58" Yakima RoundBar crossbars # Y00409: BaseLine Towers for Yakima Crossbars # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit - Qty 2 # Y06137 BaseClip Fit Kit - Qty 2 # Y06152
  view full answer...
• Compatibility of Thule Crossbars and Yakima and Inno Bases for a 2017 Chevy Volt
  Yakima and Inno bases are not compatible with the Thule roof bars. In general, each manufacturer has its own mounting methodology and kits, so the bars are not usually compatible. Your roof box, however, would be likely to fit onto the available bars. If you can send me a little more information about it I can track down better fit information. I personally prefer Yakima racks as they are extremely adaptable and can angle to precisely fit the roof better than other brands. For your...
  view full answer...
• Replacement Pads For Yakima BaseClip Fit Kits 6126 & 6137 on 2017 VW Jetta
  The Yakima BaseClip Fit Kits that go with a Yakima roof rack on your 2017 Volkswagen Jetta are the BaseClip Fit Kit # Y06126 and # Y06137, like you mentioned, and we do have the correct replacement foot pad, though it's different than what you stated. The correct part for your application is the Replacement Foot with #5 Pad for Yakima BaseLine Roof Rack Tower # 8880646.
  view full answer...
  
• Recommended Roof Rack for a 2024 Ford Escape w/ No Roof Rails
  Congrats on the new SUV. It won't be a problem at all to add a roof rack to your 2024 Ford Escape that looks close to factory. To do so I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - JetStream Crossbars - Black - Qty 2 item # Y56UV BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06152
  view full answer...
• Roof Rack Recommendation for 2015 Hyundai Sonata with Panoramic Roof
  Yakima has roof racks for your 2015 Hyundai Sonata Limted that include the panoramic roofs like what you have. So for that you could use the Jetstream Crossbar kit # Y00426, # Y28TR, # Y06137, and # Y06127 and you'd be set.
  view full answer...
• Is It Normal for Roof Rack on 2020 Ford Escape to Not Be Level
  Thanks for reaching out! Roof rack manufacturers choose the strongest parts of the vehicle to have the roof racks positioned so while it will be a little uneven, you'll want to install the Yakima CoreBar roof rack for your 2020 Ford Escape (parts listed below) per the Yakima instructions. It's actually really common for the crossbars to be uneven height-wise due to the curve of the roof, like what you said. As long as you install it per the instructions you'll be good to go! Here are...
  view full answer...
  
• Roof Rack Fit for 2015 Hyundai Sonata with Glass Panoramic Sunroof
  The roof rack I recommend for you is the Yakima Roof Rack with JetStream Crossbars # Y00426, BaseLine Towers # Y28TR, BaseClip Fit Kit # Y06137, and BaseClip Fit Kit # Y06127. I confirmed with my contact at Yakima that they do not have any fit restrictions for the glass panoramic sunroof on your 2015 Hyundai Sonata and so this roof rack will work well for you. I have attached a photo showing where this rack mounts on the Sonata.
  view full answer...
  
• Recommended Roof Rack for a 2020 Toyota Yaris Hatchback
  I am sorry we do not have a hitch that will fit the 2020 Toyota Yaris Hatchback. We do have options to add a roof rack to your car so long as you do not have any roof rails. I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum 50" Long - Qty 2 item # Y00425 in Black or item # Y00428 in Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item...
  view full answer...
• What Crossbars and Cargo Carrier do You Recommend for My 2019 Chevy Cruze?
  In order to mount a roof top carrier for luggage, you definitely need a roof rack system on your 2019 Chevy Cruze LT. For a great crossbar system, I recommend the following parts if you have a sedan model Cruze: - Round 48" CrossBars for Yakima Roof Rack System # Y00408 - BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR - RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2...
  view full answer...
• Recommended Yakima Roof Rack That Will Fit 2012 Infiniti G37 And 2016 Nissan Altima
  To install a Yakima roof rack on your 2012 Infiniti G37 and your 2016 Nissan Altima, you will be able to use the same crossbars and towers. The only different parts you will need will be the fit kits for each vehicle. I recommend purchasing the roof rack for the 2016 Altima. You would need part # Y00425, part # Y28TR, part # Y06137, and part # Y06127. Then for the Infiniti you will only need to get part # Y06109. You can use the crossbars and towers from the Altima kit mentioned above.
  view full answer...
• Recommended Yakima Roof Rack For A 2024 Ford Escape
  We can definitely set you up with a Yakima roof rack for your 2024 Ford Escape with a naked roof. I recommend the Yakima JetStream bar setup. The full roof rack will consist of the following parts: Crossbars - 60' Yakima JetStream # Y00426 Towers - Yakima Baseline Towers # Y28TR BaseClip Fit Kit # Y06137 BaseClip Fit Kit # Y06152 I prefer the JetStream bars over others because the aerodynamic shape will minimize drag and road noise. The Aero Bar shape is basically universal, and you...
  view full answer...
• Roof Rack Recommended for Carrying Kayak on 2018 Chevrolet Volt
  We do indeed have a roof rack and a kayak carrying solution for your 2018 Chevy Volt. I'd recommend a Yakima CoreBar roof rack, which can be assembled from the following parts: • Yakima 50 Inch CoreBar Crossbars, part # Y00421 • Yakima BaseLine Towers, part # Y28TR • Roof Rack Fit Clips # Y06137 • Roof Rack Fit Clips # Y06126 Yakima makes a high-quality product that's very highly rated by our customers. The rack would provide you with many years of trouble-free service. For a kayak carrier,...
  view full answer...
• Recommended Roof Rack for a 2015 Hyundai Sonata with Panoramic Roof
  The roof rack that I recommend using on your 2015 Hyundai Sonata with the panoramic roof is the Yakima JetStream roof rack. This consists of the 60" JetStream Bars # Y00426, along with the BaseLine Towers # Y28TR, and the BaseClip Fit Kits # Y06137 and # Y06127. If you would like to add locks to this then you also need part # Y07204. I spoke with my contact at Yakima and he said that right at where the roof rack bars sit you will have about 4" - 4-1/2" and then in the middle of the roof...
  view full answer...
  
• Will the Yakima Sidewinder Bike Rack Fit on Elliptical Style Crossbars on a 2013 Nissan Altima
  The Rhino-Rack Roof Rack with the Vortex Aero Crossbars, # RRVA126B-2, 2500 Series Leg Kit, # RRRLKVA, and the Custom DK Clamps and Pads, # DK381, will fit a 2013 Nissan Altima, however the Yakima Sidewinder Tandem Bike Rack is only compatible with round crossbars. According to my contact at Yakima, Yakima does not offer an adapter that will allow the Sidewinder bike rack to be used with elliptical style crossbars because the weight of the bike rack and a tandem bike would be too great...
  view full answer...
• What Kayak Carrier do You Recommend for My 85-Pound Kayak on My 2016 Hyundai Sonata?
  I have a great solution for you. While the Thule Hullavator # TH898 can be used with a crossbar system that uses clips on your 2016 Hyundai Sonata without a panoramic roof, it has a weight capacity of 75 pounds. Unfortunately, this is not enough weight capacity for our 85-pound kayak. We also do not carry a load-assist option that has enough weight capacity for your kayak. In addition, With that being said, the best option is to use the Yakima BigCatch Kayak Carrier w/ Tie-Downs - Saddle...
  view full answer...
• What Roof Rack Do You Recommend For My 2017 Chevrolet Cruze
  We do have a roof rack that will fit your 2017 Chevrolet Cruze. The roof rack will be slightly different depending on if you have the hatchback or the sedan. If you have the sedan, my roof rack recommendation will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421, BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06137, BaseClip Fit Kit for Yakima...
  view full answer...
• Best Roof Rack for 2020 Ford Escape with Naked Roof
  The best roof rack for your 2020 Ford Escape is from Yakima because it will give your Escape a roof rack that is strong (165 lb weight capacity), durable (all parts have a lifetime warranty), quiet and looks sleek. The roof rack for your '20 Escape is made up of: - Yakima JetStream Crossbars # Y00426 (Black) - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima Roof Rack # Y06137 and # Y06152 - Same Key System Lock Cores (Optional) # Y07204 The aero shape of the...
  view full answer...
• Recommended Roof Rack for a 2022 Ford Escape w/ a Naked Roof and Two Hullavators
  You don't need 70" crossbars if you go with a different roof rack system which I highly recommend. Mounting two Hullavators item # TH898 is feasible and you will most likely be breaking the law if you stick a 70" wide crossbar on your Escape's roof. For your 2022 Ford Escape with a naked roof, I recommend the roof rack by Rhino-Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 65" Long - Qty 2 item # RRVA165B-2 Rhino-Rack 2500 Series Legs...
  view full answer...
• How To Attach Yakima Jetstream Crossbars To 2020 Ford Escape with Naked Roof
  The Yakima Jetstream bars will be an excellent accessory added to your Ford Escape. At this time, we do not have in our video or photo library a visual of these crossbars or a roof rack on a 2020 Ford Escape with a naked roof though. The installation process for Yakima BaseLine Towers Part # Y28TR, BaseClips Part # Y06137, and Jetstream Bars Part # Y00425, will be about the same through various applications. With the parts above, when mounting this roof rack to a naked roof, it allows...
  view full answer...
• Carrying Bikes on a 2017 Hyundai Sonata Hybrid Limited
  The best bike rack is the one that's best for you. A lot of which is determined by how many and what kind of bikes you're going to be carrying. As well as how often you're going to be hauling the bikes. Overall, in my opinion, a hitch mount bike rack is the best way to go; however if you need to carry more than two bikes it isn't going to work for you because the only hitches that are designed for your 2018 Hyundai Sonata Hybrid are Class I receivers which are only able to carry up to...
  view full answer...
• Recommended Roof Rack For My 2015 Chevrolet Cruze
  I do have a roof rack that will fit your 2015 Chevrolet Cruze, but your Malone roof rack will not fit your vehicle. My roof rack recommendation will consist of the following: Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2, part # Y00421 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part # Y06127 Yakima Same Key...
  view full answer...
• Recommended Yakima Roof Rack for a 2024 Chevrolet Colorado
  To add a Yakima roof rack to your 2024 Chevrolet Colorado Crew Cab you will need the following parts: Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 item # Y00425 for Black or item # Y00428 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06137 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06123
  view full answer...
• Recommended Yakima Roof Rack for 2007 Honda Accord 4 Door
  For your 2007 Honda Accord you would simply select sedan for the 4 door version. The Yakima system for your vehicle will be the Baseline roof rack. The Q-Tower and Q-Clip fit kits were discontinued a few years back. My recommendation for you consists of the following Yakima parts: JetStream Crossbars - Aluminum - Black - 50" Long # Y00425 BaseLine Towers # Y28TR BaseClip Fit Kit (front) # Y06159 BaseClip Fit Kit (rear) # Y06143 I also recommend adding locks # Y07204
  view full answer...
• Will Trailer Hitch Fit a 2023 Hyundai Elantra Hybrid Limited
  I checked with all of our hitch manufacturers and while we have the Draw-Tite Hitch # DT75MR for a 2023 Hyundai Elantra, it isn't compatible with the N Line or Hybrid models. With that being said, we may still have a solution depending on what you planned to do with the hitch. For example, we have a roof rack fit from Yakima that would allow you to then mount a roof basket like the Rhino-Rack # RMCB or a bike rack like the Thule UpRide # TH599000. If you want to go with the roof rack here...
  view full answer...
• Recommended Trailer Hitch Receiver for 2015 Lexus IS 250 for a Bike Rack and Light Trailer
  I recommend the Draw-Tite trailer hitch receiver, part # 24923, for your 2015 Lexus IS 250. It's confirmed to fit both the sedan or convertible models. The hitch is a Class I, 1-1/4 inch receiver so you need to make sure the bike rack you use fits the Class I. The bike rack I recommend is the very popular Thule T2 Pro XTR, part # TH23JV. The T2 is a platfrom rack that carries up to 2 bikes at 50 pounds each. it can be folded up out of the way when you're not using it as well as tilted...
  view full answer...
• 2019 Kia Sorento LX Roof Rack Recommendation
  We do have a roof rack that fits your 2019 Kia Sorento with a naked roof, the Yakima roof rack that consists of part # Y28TR, # Y06159, # Y06170, and # Y00425. This will give you a very easy to install and aerodynamic roof rack confirmed as a fit.
  view full answer...
• 2019 Kia Sorento Roof Rack Recommendation for Naked Roof
  Since your 2019 Kia Sorento has the naked roof we will need to use a different brand since the Rhino-Rack roof rack will only fit if your Sorento had the flush rails. The alternative that fits is the Yakima roof rack and I recommend using the JetStream crossbars as they give you the aero-style with the T-Slots for various accessory mounting solutions: 50" JetStream Crossbars - Black # Y00425 BaseLine Towers - # Y28TR BaseClip Fit Kits - # Y06159 and # Y06170 Lock Core Kit - # Y07204...
  view full answer...
  
• Yakima Roof Rack that Fits 2019 Kia Sorento with Naked Roof
  Yakima does have a JetStream roof rack confirmed as a fit for your 2019 Kia Sorento with a naked roof with the part numbers # Y00425, # Y28TR, # Y06159, # Y06170. The Jetstream bars are really nice as they are aero shaped and have a channel that runs down the top of it for roof accessories that have channel attachment options.
  view full answer...
• Recommended Roof Rack for 2019 Kia Sorento with Naked Roof
  We do have a really great selection of roof rack systems that are confirmed to fit the naked roof on your 2019 Kia Sorento. I specifically recommend the Yakima JetStream setup that consists of part # Y00425 for the two 50" JetStream Crossbars in Black, # Y28TR for the BaseLine Towers, # Y06159 for the Front BaseClip Fit Kit, and # Y06170 for the Rear BaseClip Fit Kit. This is going to provide you with an extremely sleek rack that will be really quiet on the road due to the aerodynamic...
  view full answer...
  
• What is the Best Roof Rack for a 2024 Honda HR-V w/out Roof Rails?
  The best way to add a set of crossbars to your 2024 Honda HR-V without rails is to use the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06159 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06181
  view full answer...
• Roof Rack Recommendation for 2019 Kia Sorento With A Naked Roof
  Great news, the Yakima Baseline setup fits the 2019 Kia Sorento with a naked roof. You need BaseClip fit kit part # Y06170 and BaseClip fit kit part # Y06159. The clips are two different sizes because they are designed to fit the shape of the roof on the new Kia Sorento and do not fit the 2019 Hyundai Santa Fe- XL naked roof. You can use the BaseLine Towers part # Y28TR and the Yakima JetStream Aero bars part # Y00425. I have attached installation instructions for the Yakima Roof Rack...
  view full answer...
  
• Recommended Parts For Carrying 4 Bikes and Camping Gear With a 2023 Honda HR-V
  The Draw-Tite Max-Frame Trailer Hitch Receiver # DT57YR is our highest capacity receiver for your 2023 Honda HR-V. This receiver has a maximum tongue weight rating of 300lbs but be sure to verify you do not exceed any weight capacities given by Honda. I recommend pairing this with the Yakima RidgeBack Bike Rack # Y02458 to keep the weight down. This carrier weighs 35lbs and can support 4 bikes up to 40lbs each. You may need an Adapter Bar # Y02531 for any of your bikes with an alternative...
  view full answer...
• What Length Roof Rack Crossbars For a 2019 Jeep Cherokee
  There are a few different length options of crossbars that are confirmed to fit your 2019 Jeep Cherokee. A great 50 inch crossbar option is the Yakima JetStream Crossbars # Y00425 which are an aluminum aero bar that has a weight capacity of 150lbs. If your Jeep has the factory installed rails the run from to back you will need the Yakima Timberline Towers # Y00147, or the Yakima BaseLine Towers # Y28TR, Yakima BaseClip Fit Kit # Y06123, and Yakima BaseClip Fit Kit # Y06159 if you do not...
  view full answer...
• Will the SportRack Semi-Custom Roof Rack Fit a 2018 Elantra GT Hatchback Bare Roof?
  I have a great solution for you. Unfortunately, the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 will not fit your 2018 Hyundai Elantra GT. However, for a roof rack system that does fit for your Hyundai Elantra GT, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06175 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06159 This setup...
  view full answer...
• How to Mount a Tent with a 2017 Kia Sorento with a Bare Roof
  Since the kit that involves parts # Y00421, # Y28TR, and # Y06159 in your question, I assume you have a 2017 Kia Sorento with a bare roof and no factory rails. If this is the case, while we do have a solution you can use, you unfortunately cannot mount a roof top tent to your roof. This is because all of the roof racks we carry use door jamb clamps to mount the crossbars to your vehicle. Manufacturers strongly advise against using roof racks that use this attachment style because the clips...
  view full answer...
• Roof Rack Recommendation for 2007 Honda Accord
  While we don't have a Thule roof rack available for your 2007 Honda Accord we have the very similar quality Yakima JetStream roof rack part numbers # Y00428, # Y28TR, # Y06159, # Y06143 that is a fit. Yakima and Thule are both widely considered to be the nicest roof racks out there so this rack would be a really great option.
  view full answer...
• Roof Racks for 2004 Honda Civic 2-Door Coupe for Transporting Surf Boards
  We can help you with a roof rack and surf board carriers for your 2004 Honda Civic 2-door coupe. Roof rack options for your Civic come from Yakima and SeaSucker and are displayed on the page I linked for you. Yakima offers both standard round bar racks and also their quieter Jetstream rack systems. The round bar rack is the lowest-cost setup and is made of parts # Y00408, # Y28TR, # Y03536, # Y06162 and # Y06159. But for only a few more dollars you can get the black Jetstream rack, which...
  view full answer...
• Instructions for Yakima JetStream Roof Rack on 2019 Honda Accord
  Absolutely! I have attached the detailed written installation instructions for the Yakima JetStream Roof Rack system that is confirmed to fit your 2019 Honda Accord. This system consists of # Y00425 for the Black 50 Inch JetStream Crossbars, # Y28TR for the BaseLine Towers, # Y06123 for the Front Fit Kit, and # Y06159 for the Rear Fit Kit. This system will use a clamp-style attachment to secure the feet to the roof of your Accord. I have attached an installation video for this system...
  view full answer...
  
• Roof Rack For 2017 Lexus IS 300 For Ski & Snowboard Carrier
  To carry snowboards on your 2017 Lexus IS 300, you will need a roof rack, as there isn't a standalone carrier just for a '17 IS 300. This will work for the 4-door sedan models, so if that's what your 2017 Lexus IS 300 is, I recommend a roof rack from Yakima: - Yakima JetStream Crossbars # Y00425 - Towers # Y28TR - Fit Kit # Y06159 & # Y06175 This rack will allow you to put on a snowboard rack for your Lexus, and I recommend an option from Kuat: - 4 Pairs of Skis or 2 Boards: Kuat...
  view full answer...
• Snowboard Carrier Recommendation for a 2019 Honda Accord
  I really like the Kuat Grip Ski and Snowboard Carrier # GRR6B because it looks sleek and has a slide out feature that makes it easier to load your skis/boards. The Grip has a nice, low-profile build so it compliments your vehicle and there are angle adjustment bolts to make sure both parts of the carrier are level with each other so it's easy to install your skis/boards. This installs on a roof rack so if you don't already have one on your 2019 Honda Accord I recommend going with the Yakima...
  view full answer...
• Yakima Roof Rack Fit on 2017 Toyota Yaris iA
  We do have all of the parts for a Yakima roof rack that fits a 2017 Toyota Yaris iA with a naked roof. It will consist of the following components: - Yakima JetStream Crossbars # Y00425 (Black) - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06123 - BaseClip Fit Kit # Y06159 - Same Key System Lock Cores (Optional) # Y07204 This will give your '17 Yaris iA a very quiet and strong rack so you can carry whatever gear you need. I've added links to instructions and video...
  view full answer...
• Roof Rack and Kayak Carrier for a 2017 Jeep Cherokee
  Many racks will be designed with overhang in mind for a variety of reasons. This can range from intending to have tie-down points for a load to maximizing carrying capacity. I also recommend that people use Aero shaped bars for kayak and watersport applications, as the width of the bars is helpful in controlling and mounting the load. For your roof rack, I recommend a Yakima JetStream kit, consisting of: - Yakima JetStream 50" Crossbars, part # Y00425 - Yakima BaseLine Towers, part...
  view full answer...
• Roof Rack System to Carry a Bike and Kayak on a 2002 Honda Civic
  For your 2002 Honda Civic, I recommend using the Yakima CoreBar Crossbar System composed of part # Y00421, part # Y28TR, part # Y06162, and part # Y06159. The Yakima CoreBars offer a sleek and aerodynamic look which will reduce wind noise and prevent drag. The BaseLine towers are contoured to the roof of your vehicle and can be adjusted to provide a level crossbar surface. For a bike rack that will work well with the above crossbars, I recommend the Yakima HighRoad Roof Bike Rack part...
  view full answer...
• Recommended Bike Rack Options For 40lb Bike On A 2021 Nissan Leaf
  The trunk mounted bike rack carriers that we currently offer unfortunately aren't rated high enough for a 40lb bike so you would need to switch to either a trailer hitch mount or roof rack mounted rack. If you don't have a trailer hitch then you can install the EcoHitch Hidden Trailer Hitch Receiver # 306-X7221 and then use a rack like the Yakima RidgeBack Bike Rack for 2 Bikes # Y02457. If you'd rather go with a roof rack option then you could first install the following components: Yakima...
  view full answer...
• Recommended Roof Rack for a 2023 Honda HR-V w/ a Naked Roof
  To attach a roof rack to your 2023 Honda HR-V, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Silver - 50" Long - Qty 2 item # Y00428 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06159 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06181 These crossbars have a 165 lbs capacity....
  view full answer...
• Recommended Roof Rack for 2004 Honda Civic Coupe
  We have several roof racks confirmed to fit your 2004 Honda Civic coupe, but there are no Rhino Rack roof racks among them. I have included a link to all the roof racks confirmed to fit your vehicle. You can then filter them by bar type, brand, color, etc. I recommend going with the Yakima Round Crossbars Roof Rack which includes the following parts: 48 inch CrossBars # Y00408 BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 Fit Kits # Y06162 and # Y06159 Check out the demonstration...
  view full answer...

Do you have a question about this Roof Rack?